Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.
OCR for page 141
Munitions Manufacturing: A Call for Modernization References ADAPT (Advanced Design and Production Technologies) 1999. Advanced Design and Production Technologies: FY 1999 Master Plan, Part 1, Strategy. U.S. Department of Energy Defense Programs, ADAPT Initiative, Washington, D.C., March 25. Adiga, S. 1993. Object Oriented Software for Manufacturing Systems, Chapman Hall, London. Albert, M. 2000. STEP NC—The End of G-Codes? Modern Machine Shop Online. July. Available online at http://www.modernmachineshop.com/articles/070001.html, August 3, 2001. Banks, H. 1999. “Virtually Perfect” Forbes, October 4, 1999, pp. 128–129. Barr, A., and E.A.Feigenbaum, 1981. The Handbook of Artificial Intelligence: Vol. I–III William Kaufmann, Los Altos, Calif. Basili, V., G.Caldiera, and H.D.Rombach 1994. “Experience Factory”. Pp. 469– 476 in Encyclopedia of Software Engineering, Vol. 1, J.Marciniak, (Ed.). Wiley, New York. Braunstein, J. 1999. “EARP Velocity for Next-Generation Manufacturing”, Manufacturing Engineering, Vol. 123, No. 5 (May), pp. 126–130. Burleson, R. 1999a. TIME: Open Modular Architecture Control. Presentation to NRC Committee to Evaluate TIME, December 9. Burleson, R. 1999b. Totally Integrated Munitions Enterprise. Presentation to NRC Committee to Evaluate TIME, December 9. Burleson, R. 2000. Review of TIME Program. Presentation to NRC Committee to Evaluate TIME, February 10. Cary, D. 2000. TIME Primex Demonstration. Presentation to NRC Committee to Evaluate TIME, Feb. 10. Cooke, I. and P.Mayes 1996. Introduction to Innovation and Technology Transfer. Artech House Technology Management and Professional Development Library, London. Curry, J., and M.Kenney 1999. “Beating the Clock: Corporate Responses to Rapid Changes in the PC Industry,” The California Management Review, Vol. 42, No. 1, pp. 8–36. Debenham J, and Clark J. 1994. “The Knowledge Audit”. Robotics and Computer-Integrated Manufacturing, Vol. 11, No. 3, pp. 201–211. DoE (Department of Energy) 1999. Technologies Enabling Agile Manufacturing (TEAM) Final Report, UCRL-MI-133790. DOE TEAM Program Office. Oak Ridge, Tenn., May.
OCR for page 142
Munitions Manufacturing: A Call for Modernization DoL (Department of Labor) 2000. O*NET, the Occupational Information Network. U.S. DoL Employment and Training Administration, Washington, D.C. Available online at http://www.doleta.gov/programs/onet, August 3, 2001. EIA (Electronic Industries Association) 1979, Interchangeable Variable Block Data Format for Positioning, Contouring, and Contouring/Positioning Numerically Controlled Machines. EIA Standard EIA-274-D. EIA, Washington, D.C., February. Frampton, N. and T.McWilliams, 2000. Difficult Munitions Manufacturing Processes. Presentation to NRC Committee to Evaluate the TIME Program, June 7. GAO (General Accounting Office) 1996a. Ammunition Industrial Base: Information on DoD’s Assessment of Requirements. GAO/NSIAD-96–133. GAO, Washington, D.C., May. GAO (General Accounting Office) 1996b. Defense Ammunition: Significant Problems Left Unattended Will Get Worse. GAO/NSIAD-96–129. GAO, Washington, D.C., June. Gery, G. 1989. “Training versus Performance Support: Inadequate Training Is Now Insufficient,” Performance Improvement Quarterly, Vol. 2, No. 3, pp. 51–71. Gotsis, A.D. and D.M.Kalyon, 1989. “Simulation of Mixing in Co-Rotating Twin Screw Extruders,” pp. 44–48 in Society of Plastics Engineers ANTEC Technical Papers, Vol. 35. Gray, J., A.Bosworth , A.Layman, and H.Pirahesh 1996. Data Cube: A Relational Aggregation Operator Generalizing Group-by, Cross-tab, and Sub-totals, pp. 152–159 in Proceedings of the 1996 IEEE 12th International Conference on Data Engineering, New Orleans, La., IEEE, New York. Greenfeld, I., F.B.Hansen, and P.K.Wright, 1989. “Self-sustaining, Open-System Machine Tools,” pp. 281–292 in the Proceedings of the 17th North American Manufacturing Research Institution, Vol. 17. North American Manufacturing Research Institution, Dearborn, Mich. Halpern, M. 1998. “Pushing the Design Envelope with CAE.” Mechanical Engineering Magazine, November, pp. 66–71. Hazelrigg, G. 1999a. “An Axiomatic Framework for Engineering Design,” Journal of Mechanical Design, Vol. 121, September, pp. 342–347. Hazelrigg, G. 1999b. Validation of Engineering Design Alternative Selection Methods. Working paper, National Science Foundation, Arlington, Va. HFMI (Highly Filled Materials Institute) (undated). Website of HFMI at Stevens Institute of Technology, Available online at http://www.hfmi.stevens-tech.edu, August 3, 2001. HFMI (Highly Filled Materials Institute) 1998. “Mathematical Modeling of Processing of Energetics,” Newsletter of HFMI at Stevens Institute of Technology, HFMI, Hoboken, N.J., March. Hillaire, R., L.Marchetti, and P.K.Wright, 1998. “Geometry for Precision Manufacturing on an Open Architecture Machine Tool (MOSAIC-PC)”, pp. 605–610 in the Proceedings of the ASME International Mechanical
OCR for page 143
Munitions Manufacturing: A Call for Modernization Engineering Congress and Exposition, MED-Vol. 8, Anaheim, Calif., November. Hillaire, R. 2000. “Whatever Happened to Open Controls?,” Manufacturing Engineering, Vol. 124, No. 1 (June), pp. 80–88. Hines, P. 1999. Value Stream Analysis: Strategy and Excellence in the Supply Chain, Financial Times/Prentice Hall, Paramus, N.J. Hoeper P.J. 1998. “Industrial Base Policy Letter 98–1. Ammunition” (Policy letter from Assistant Secretary of the Army; Research, Development and Acquisition), June 30, 1998. Huber, R.K., W.P.Cherry, T.J.Hodgson. 1999. “Planning the Ground Force for Operations in the Post-Cold War Era: A Systems Analysis Approach,” Defense Analysis for the 21st Century: Issues, Approaches, Models, Nomos Verlagsgesellschaft, Baden-Baden, Germany. Jones, Kenneth L. 1995. “The Implications and Risks of an Agile Manufacturing Industrial Base to U.S. Army Materiel Readiness for Rapid Reaction to Major Regional Contingencies.” Ph.D. Dissertation, North Carolina State University, University Microfilms, Ann Arbor, Mich. Kamath, M., J.Pratt, and J.Mize. 1995. “A Comprehensive Modeling and Analysis Environment for Manufacturing Systems”, pp. 759–768 in proceedings of the 4th Industrial Engineering Research Conference. Center for Computer-Integrated Manufacturing, Stillwater, Okla. Kaufman, R. 1986. “Assessing Needs”, In Introduction to Performance Technology, M.Smith, (Ed.). National Society for Performance and Instruction, Washington, D.C. Lawrence Livermore National Laboratory (LLNL). 1999. DOE/OMAC Department of Energy Open Architecture Modular Controller Milling Machine Requirement, Version 1.0., LLNL, Livermore, Calif., January. LCMS (Louisiana Center for Manufacturing Sciences) 1999. TIME Centralized Network Architecture, LCMS, Shreveport, La., May 5. Lewis, R. 1997. “Sharing Professional Knowledge: Organizational Memory”. International Journal of Continuing Engineering Education and Life-Long Learning, Vol. 7, No. 2, pp. 95–107. ManTech. 1999. TIME ManTech Project, Version f (CD-ROM provided to NRC Committee to Evaluate TIME), ManTech Program Office. November. Manufacturing News. 1999. “The Internet Presents Companies and Society with a Tangled Web of Difficult Cultural and Political Challenges,” Vol. 6, No. 2, pp. 1–7 in Manufacturing News, June 21. McClelland, J.L, B.L.McNaughton, , and R.C.O’Reilly, 1995. “Why There Are Complementary Learning Systems in Hippocampus and Neocortex: Insights from the Successes and Failures of Connectionist Models of Learning and Memory”. Psychological Review, Vol. 102, No. 3, pp. 419– 457. McCormack, R. 1999. “Rockwell Provides its Customers with “Complete Automation”, Manufacturing News, Vol. 6, No. 12 (June 21), pp. 10–12. McWilliams, T. 1999. Totally Integrated Munitions Enterprise (TIME). Presentation to NRC Committee to Evaluate TIME, Dec. 9.
OCR for page 144
Munitions Manufacturing: A Call for Modernization McWilliams, T. 2000a. Difficult Processes in Munitions Manufacturing, Presentation to Committee to Evaluate TIME, June 7. McWilliams, T. 2000b. TIME Update. Presentation to NRC Committee to Evaluate TIME, February 10. McWilliams, T. 2000c. TIME Update. Presentation to NRC Committee to Evaluate TIME, April 3. MDSI (Manufacturing Data Systems, Inc.) 2000. OpenCNC. Advertising Brochure , MDSI, Ann Arbor, Mich. Mezger, M. 2000. Manufacturing Technology Program for Energetics. Presentation at the Advanced Energetics Materials Workshop, Defense Systems Management College, Fort Belvoir, Va., February 1–4. Miller, T. 1999. Totally Integrated Munitions Enterprise. Presentation to NRC Committee to Evaluate TIME, December 9. Morris, E. 2000. Affordable Multi-Missile Manufacturing (AM3) Program. Oral Presentation to NRC Committee to Evaluate TIME, February 10. NDU (National Defense University) 1996. Munitions Industry Study Report, NDU, Washington, D.C. NDU (National Defense University) 1997. Munitions Industry Study Report, NDU, Washington, D.C. NDU (National Defense University) 1998. Munitions Industry Study Report, NDU, Washington, D.C. Neal, R. 2000. Technologies Enabling Agile Manufacturing (TEAM)—the Genesis of TIME. (Summary from DOE Report, An Overview of TEAM Strategies for Integrating the Product Realization Process—Rev. 1.0, June 1997) NRC (National Research Council) 1995. Marshalling Technology for Development. National Academy Press, Washington, D.C. NRC (National Research Council) 1998. Visionary Manufacturing Challenges for 2020. National Academy Press, Washington, D.C. NRC (National Research Council) 1999. Defense Manufacturing in 2010 and Beyond. National Academy Press, Washington, D.C. NRC (National Research Council) 2000. Surviving Supply Chain Integration: Strategies for Small Manufacturers. National Academy Press, Washington, D.C. OMACUG (Open Modular Architecture Controller Users Group) 1994. Requirements of Open, Modular Architecture Controllers for Applications in the Automotive Industry. White Paper, Version 1.1, Chrysler Corporation, Ford Motor Company, and General Motors Corporation, December. OMACUG, Dedham, Mass. OMACUG (Open Modular Architecture Controller Users Group) 1999. OMAC API Work Group. OMAC API Set, Version 0.23, Working Document, October 12, 1999. OMACUG, Dedham, Mass. Osiecki, C. 1999. Introduction to the Totally Integrated Munitions Enterprise. (Briefing to Defense Manufacturing Conference 1999, Miami Beach, Florida. Also presented to NRC Committee to Evaluate TIME), November.
OCR for page 145
Munitions Manufacturing: A Call for Modernization Perneski, A.J. 1992. “Beyond Individual Learning: Organizational Learning,” pp. 223–224 in 1992 International Engineering Management Conference: Managing in a Global Environment, IEEE, New York. PNNL (Pacific Northwest National Laboratory) 1997. Recommended Strategy for Configuring and Managing the U.S. Munitions Industrial Base.” PNNL, Richland, Wash., June. Prytz, K., S.Y.Nof, , and A.Rolstadas 1997. “Organizational Memory and Learning in Manufacturing Enterprises,” Research Memo, School of Industrial Engineering, Purdue University, West Lafayette, Ind. Raybould, B. 1990. “Solving Human Performance Problems with Computers: A Case Study: Building an Electronic Performance Support System.” Performance & Instruction, Vol. 29, No. 10, pp. 4–14. Raytheon 1999. TIME Architecture for Product Realization Process of Mechanical Piece Parts, Revision 1.0. Raytheon Consulting Group, Arlington, Tex., September 30. Raytheon 2000. Totally Integrated Munitions Enterprise: Enterprise Architecture. Raytheon Consulting Group, Arlington, Tex., January 21. Reynolds, A. 1993. “The Top Five Questions About Performance Support Systems.” Technical & Skills Training, Vol. 4, No. 1, pp. 8–11. Richmond, O. 1995. “Concurrent Design of Products and Their Manufacturing Processes Based upon Models of Evolving Physicoeconomic State,” p. 153–155 in Simulation of Materials Processing: Theory, Methods and Applications, eds. S.Shen and P.Dawson. Balkema, Rotterdam. Rosenberg, S. 1999. “Totally Integrated Munitions Enterprise,” Presentation to the National Defense Industrial Association Systems Engineering and Supportability Conference, Sept. 22. Rosenberg, S., R.Burleson, and M.Poggio, (undated). TIME: The Road to Affordable Munitions Production for the 21st Century. White Paper provided to NRC Committee to Evaluate TIME. Senge, P.M. 1990. The Fifth Discipline: The Art and Practice of the Learning Organization. Doubleday, New York. STEP (STEP Tools, Inc.) 2000. STEP NC Overview. STEP Tools, Inc., Troy, N.Y. Available online at http://www.steptools.com/library/stepnc, August 3, 2001. Stephens, E. 1999. Totally Integrated Munitions Enterprise—Web Integration (Presentation to NRC Committee to Evaluate TIME), December 9, 1999. Stephens, E. 2000. TIME Web Enablement. Presentation to NRC Committee to Evaluate TIME, Feb. 10. Tanzer, A. 1999. “Warehouses that Fly,” Forbes, October 18th, pp. 120–124. Taylor, C., T.Yager, R.Caille, S.Walker, C.Yen, and C.Bailo. 1996. Open, Modular Architecture Controls at GM Powertrain, May 14. Available online at http://www.arcweb.com/omac/Techdocs/GMPTG.htm, August 9, 2001. TEAM (Technologies Enabling Agile Manufacturing) 1997. “Integrated Product Realization is Key Theme for 1997 TEAM Activities,” in TEAMWORK, Quarterly Newsletter Published by TEAM Program Office, DOE Y-12 Plant, Oak Ridge, Tenn. July.
OCR for page 146
Munitions Manufacturing: A Call for Modernization Warner J., K.Peterson, L.Clopp, I.Chernofsky, D.Miklovic. 2000. Supply Chain Management Glossary 1.0. May 23. The Gartner Group, Stanford, Conn. Available on line at http://gartner11.gartnerweb.com/public/static/hotc/hc00088697.html, August 6, 2001. Whitney, R. 1999. “Transitioning to 3-D” Manufacturing Engineering, August 1999, pp. 74–78.
Representative terms from entire chapter: