National Academies Press: OpenBook
« Previous: Appendix C: Agenda
Suggested Citation:"Appendix D: Participants." National Research Council. 2003. Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century. Washington, DC: The National Academies Press. doi: 10.17226/10694.
×

D Participants

CHALLENGES FOR THE CHEMICAL SCIENCES IN THE 21ST CENTURY: WORKSHOP ON MATERIALS AND MANUFACTURING

June 13-15, 2001

Richard A. Adams, University of South Carolina

Joseph A. Akkara, National Science Foundation

Richard C. Alkire, University of Illinois

Ronald D. Archer, University of Massachusetts

Susan J. Babinec, Dow Chemical Company

Mark T. Bernius, Dow Chemical Company

Ronald Breslow, Columbia University

Robert A. Brown, Massachusetts Institute of Technology

Michelle V. Buchanan, Oak Ridge National Laboratory

Leonard J. Buckley, Naval Research Laboratory

Donald, M. Burland, National Science Foundation

Manoj K. Chaudhury, Lehigh University

Helena L. Chum, National Renewable Energy Laboratory

Oliver Chyan, University of North Texas

Geoffrey W. Coates, Cornell University

Khershed P. Cooper, Naval Research Laboratory

Dady Dadyburjor, West Virginia University

Patricia Dehmer, U.S. Department of Energy

Lawrence Dubois, SRI International

M. Samy El-Shall, Virginia Commonwealth University

Hicham Fenniri, Purdue University

Mary E. Galvin, University of Delaware

Andrew Gewirth, University of Illinois, Urbana-Champaign

J. Murray Gibson, Argonne National Laboratory

Suggested Citation:"Appendix D: Participants." National Research Council. 2003. Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century. Washington, DC: The National Academies Press. doi: 10.17226/10694.
×

Greg Gillette, GE Corporate R&D

Louis C. Glasgow, E.I. du Pont de Nemours and Company

David S. Green, National Institute of Standards and Technology

Mihal E. Gross, Agere Systems

Esin Gulari, National Science Foundation

Arnold M. Guloy, University of Houston

Paula T. Hammond, Massachusetts Institute of Technology

Craig J. Hawker, IBM Almaden Research Center

Chris W. Hollinsed, E.I. du Pont de Nemours and Company

Nancy B. Jackson, Sandia National Laboratories

Wyn P. Jennings, National Science Foundation

Klavs F. Jensen, Massachusetts Institute of Technology

Diane A. Jones, U.S. House of Representatives Subcommittee on Science

Howard Katz, Bell Laboratories, Lucent Technologies

Steven W. Keller, University of Missouri

Charles Kresge, Dow Chemical Company

Angelo Lamola, Rohm & Haas Company

Jorn Larsen-Basse, National Science Foundation

John W. Larson, Lehigh University

L. James Lee, Ohio State University

Andrew J. Lovinger, National Science Foundation

Toni G. Marechaux, National Research Council

Tobin J. Marks, Northwestern University

Krzysztof Matyjaszewski, Carnegie Mellon University

Richard McCullough, Carnegie Mellon University

Tyler D. McQuade, Massachusetts Institute of Technology

William S. Millman, U.S. Department of Energy

Tyrone D. Mitchell, National Science Foundation

Daniel Morse, University of California, Santa Barbara

Ralph G. Nuzzo, University of Illinois, Urbana-Champaign

Geoffrey A. Ozin, University of Toronto

Charles H. F. Peden, Pacific Northwest National Laboratory

Julia M. Phillips, Sandia National Laboratories

Thomas B. Rauchfuss, University of Illinois, Urbana-Champaign

William Rees, Georgia Tech

Elsa Reichmanis, Lucent Technologies

Don Rohr, GE Corporate R&D

Rodney Ruoff, Northwestern University

Alan J. Russell, University of Pittsburgh

Lynn F. Schneemeyer, Agere Systems

Jeffrey J. Siirola, Eastman Chemical Company

Rick Sisson, Worcester Polytechnic Institute

Paul H. Smith, U.S. Department of Energy

Suggested Citation:"Appendix D: Participants." National Research Council. 2003. Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century. Washington, DC: The National Academies Press. doi: 10.17226/10694.
×

Jack Solomon, Praxair, Inc.

Lawrence R. Sita, University of Maryland, College Park

Judy Stein, GE Corporate R&D

Johannes Swank

David A. Tirrell, California Institute of Technology

Matthew V. Tirrell, University of California, Santa Barbara

Carole Trybus, Concurrent Technologies Corporation

Richard Uriate, GE Corporate R&D

Dion Vlachos, University of Delaware

Paul F. Walters, American University

W. Henry Weinberg, SYMYX Technologies, Inc.

Robert Wellek, National Science Foundation

George M. Whitesides, Harvard University

Younan Xia, University of Washington

Peidong Yang, University of California, Berkeley

Gregg A. Zank, Dow Corning Corporation

Suggested Citation:"Appendix D: Participants." National Research Council. 2003. Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century. Washington, DC: The National Academies Press. doi: 10.17226/10694.
×
Page 60
Suggested Citation:"Appendix D: Participants." National Research Council. 2003. Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century. Washington, DC: The National Academies Press. doi: 10.17226/10694.
×
Page 61
Suggested Citation:"Appendix D: Participants." National Research Council. 2003. Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century. Washington, DC: The National Academies Press. doi: 10.17226/10694.
×
Page 62
Next: Appendix E: Reports from the Breakout Session Groups »
Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century Get This Book
×
 Materials Science and Technology: Challenges for the Chemical Sciences in the 21st Century
Buy Paperback | $29.00 Buy Ebook | $23.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

The report assesses the current state of chemistry and chemical engineering at the interface with materials science and identifies challenges for research. Recent advances are blurring the distinction between chemistry and materials science and are enabling the creation of new materials that, to date, have only been predicted by theory. These advances include a greater ability to construct materials from molecular components, to design materials for a desired function, to understand molecular "self-assembly, and to improve processes by which the material is "engineered" into the final product.

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!