National Academies Press: OpenBook
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

DECREASING ENERGY INTENSITY IN MANUFACTURING

Assessing the Strategies and Future Directions of the Industrial Technologies Program

Committee for Review of the Department of Energy’s Industrial Technologies Program

Board on Manufacturing and Engineering Design

Division on Engineering and Physical Sciences

NATIONAL RESEARCH COUNCIL OF THE NATIONAL ACADEMIES

THE NATIONAL ACADEMIES PRESS
Washington, D.C.
www.nap.edu

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

THE NATIONAL ACADEMIES PRESS
500 FIFTH STREET, N.W. WASHINGTON, DC 20001

NOTICE: The project that is the subject of this report was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine. The members of the committee responsible for the report were chosen for their special competences and with regard for appropriate balance.

This study was supported by Contract No. DE-AT01–04EE650009 between the National Academy of Sciences and the U.S. Department of Energy. Any opinions, findings, conclusions, or recommendations expressed in this publication are those of the author(s) and do not necessarily reflect the views of the organizations or agencies that provided support for the project.

International Standard Book Number 0-309-09574-3

Copies of this report are available in limited quantities from:

Board on Manufacturing and Engineering Design

500 Fifth St., N.W.

Washington, DC 20001

202–334–2589

bmed@nas.edu

http://www.nationalacademies.org/bmed

Additional copies of this report are available from the
National Academies Press,
500 Fifth Street, N.W., Lockbox 285, Washington, DC 20055; (800) 624–6242 or (202) 334–3313 (in the Washington metropolitan area); Internet, http://www.nap.edu

Copyright 2005 by the National Academy of Sciences. All rights reserved.

Printed in the United States of America

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

THE NATIONAL ACADEMIES

Advisers to the Nation on Science, Engineering, and Medicine

The National Academy of Sciences is a private, nonprofit, self-perpetuating society of distinguished scholars engaged in scientific and engineering research, dedicated to the furtherance of science and technology and to their use for the general welfare. Upon the authority of the charter granted to it by the Congress in 1863, the Academy has a mandate that requires it to advise the federal government on scientific and technical matters. Dr. Bruce M.Alberts is president of the National Academy of Sciences.

The National Academy of Engineering was established in 1964, under the charter of the National Academy of Sciences, as a parallel organization of outstanding engineers. It is autonomous in its administration and in the selection of its members, sharing with the National Academy of Sciences the responsibility for advising the federal government. The National Academy of Engineering also sponsors engineering programs aimed at meeting national needs, encourages education and research, and recognizes the superior achievements of engineers. Dr. Wm.A.Wulf is president of the National Academy of Engineering.

The Institute of Medicine was established in 1970 by the National Academy of Sciences to secure the services of eminent members of appropriate professions in the examination of policy matters pertaining to the health of the public. The Institute acts under the responsibility given to the National Academy of Sciences by its congressional charter to be an adviser to the federal government and, upon its own initiative, to identify issues of medical care, research, and education. Dr. Harvey V.Fineberg is president of the Institute of Medicine.

The National Research Council was organized by the National Academy of Sciences in 1916 to associate the broad community of science and technology with the Academy’s purposes of furthering knowledge and advising the federal government. Functioning in accordance with general policies determined by the Academy, the Council has become the principal operating agency of both the National Academy of Sciences and the National Academy of Engineering in providing services to the government, the public, and the scientific and engineering communities. The Council is administered jointly by both Academies and the Institute of Medicine. Dr. Bruce M.Alberts and Dr. Wm.A.Wulf are chair and vice chair, respectively, of the National Research Council.

www.national-academies.org

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

COMMITTEE FOR REVIEW OF THE DEPARTMENT OF ENERGY’S INDUSTRIAL TECHNOLOGIES PROGRAM

JOSEPH G.WIRTH, Chair,

Mount Shasta, California

VIOLA L.ACOFF,

University of Alabama, Tuscaloosa

ALEXIS G.CLARE,

Alfred University, Alfred, New York

KEVIN A.DAVIS,

Reaction Engineering International, Salt Lake City, Utah

NICHOLAS J.GIANARIS,

General Dynamics Land Systems, Sterling Heights, Michigan

JOANNA R.GROZA,

University of California, Davis

WARREN H.HUNT, JR.,

Aluminum Consultants Group, Inc., Murrysville, Pennsylvania

GEORGE D.PFAFFMANN,

Ajax Magnethermic TOCCO, Madison Heights, Michigan

PETER H.PFROMM,

Kansas State University, Manhattan

WILLIAM H.PLENGE,

Potomac Services International, Inc., Harwood, Maryland

JEFFREY J.SIIROLA,

Eastman Chemical Company, Kingsport, Tennessee

T.S.SUDARSHAN,

Materials Modification, Inc., Fairfax, Virginia

RICHARD E.TRESSLER,

Pennsylvania State University, University Park

COURTNEY A.YOUNG,

Montana Tech of the University of Montana, Butte

Staff

BONNIE A.SCARBOROUGH, Program Officer

MARTA VORNBROCK, Research Assistant

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

BOARD ON MANUFACTURING AND ENGINEERING DESIGN

PAMELA A.DREW, Chair,

The Boeing Company, Seattle, Washington

CAROL L.J.ATKINS,

Sandia National Laboratories, Albuquerque, New Mexico

GREGORY AUNER,

Wayne State University, Detroit, Michigan

RON BLACKWELL,

AFL-CIO, Washington, D.C.

THOMAS W.EAGAR,

Massachusetts Institute of Technology, Cambridge

ROBERT E.FONTANA, JR.,

Hitachi Global Storage Technologies, San Jose, California

PAUL B.GERMERAAD,

Intellectual Assets, Inc., Saratoga, California

THOMAS HARTWICK,

Snohomish, Washington

ROBERT M.HATHAWAY,

Oshkosh Truck Corporation, Oshkosh, Wisconsin

PRADEEP K.KHOSLA,

Carnegie Mellon University, Pittsburgh, Pennsylvania

JAY LEE,

University of Wisconsin, Milwaukee

DIANA L.LONG,

Robert C. Byrd Institute for Flexible Manufacturing, South Charleston, West Virginia

MANISH MEHTA,

National Center for Manufacturing Sciences, Ann Arbor, Michigan

NABIL Z.NASR,

Rochester Institute of Technology, Rochester, New York

ANGELO M.NINIVAGGI, JR.,

Plexus Corporation, Nampa, Idaho

JAMES B.O’DWYER,

PPG Industries, Allison Park, Pennsylvania

HERSCHEL H.REESE,

Dow Corning Corporation, Midland, Michigan

HERMAN M.REININGA,

Rockwell Collins, Cedar Rapids, Iowa

LAWRENCE RHOADES,

Extrude Hone Corporation, Irwin, Pennsylvania

JAMES B.RICE, JR.,

Massachusetts Institute of Technology, Cambridge

VINCENT J.RUSSO,

Dayton, Ohio

DENISE F.SWINK,

Germantown, Maryland

ALFONSO VELOSA III,

Gartner Consulting, Tucson, Arizona

BEVLEE A.WATFORD,

Virginia Polytechnic Institute and State University, Blacksburg

JOHN F.WHITE,

Altarum, Ann Arbor, Michigan

Staff

TONI G.MARÉCHAUX, Director

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

This page intentionally left blank.

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

Preface

For more than a decade, the Department of Energy (DOE) has supported the Industrial Technologies Program (ITP) as one element in achieving its overall mission and goals. The mission of the ITP is to decrease energy intensity in the U.S. industrial sector through a coordinated program of research and development, validation, and dissemination of energy efficiency technologies and operating practices. At the request of the DOE’s Office of Energy Efficiency and Renewable Energy, the National Research Council (NRC) established the Committee for Review of the Department of Energy’s Industrial Technologies Program. Committee members were selected from industry, academia, and government laboratories for their knowledge and experience with the Industries of the Future and supporting areas within the ITP. An overall review of the ITP was conducted by the committee on May 19–21, 2004, with ITP managers in Washington, D.C. Information from that review forms the primary basis for this report.

The committee was tasked to do the following:

  • Evaluate the overall ITP strategic plan as contained in the Multi-Year Program Plan (MYPP), including whether the strategic plan is appropriate, has reasonable and achievable goals, and reflects the needs of the DOE and the broader U.S. industrial community;

  • Evaluate the technical quality and appropriateness of individual subprogram plans by reviewing both the decision-making process and each prospective portfolio, including the following: how focus areas and barriers were identified; whether appropriate data sources were used; whether the data used (studies, roadmaps, industry expertise) support the selection of focus areas and barriers; whether the focus areas and barriers are the highest priority or most appropriate related to the ITP’s mission; how the R&D pathways were determined and whether these pathways are likely to result in achieving program goals; whether the prospective subprogram portfolios are the right ones to achieve the goals of the ITP; whether there are unnecessary research areas or gaps in research; and whether there is a reasonable mix of near-, mid-, and far-term research; and

  • Determine the prospective value of the MYPP and planning processes, including the likelihood that the program will achieve its goals; whether there is a good plan to carry out the program; how well the program is connected to the users, including non-ITP researchers; and the capacity to develop lessons learned for future interdisciplinary research activities.

This report contains the committee’s assessment of the ITP strategy, how effectively it is being implemented, and the likelihood of achieving its program goals. It includes the committee’s conclusions

Page viii Cite
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

concerning the ITP and its subprograms, as well as recommendations on how to strengthen the overall program and improve each of the subprogram areas.

I wish to thank the committee members for their enthusiasm, dedication, and insights in conducting the reviews and in preparing this report. The committee operated under the auspices of the NRC Board on Manufacturing and Engineering Design and was ably assisted by Bonnie Scarborough and Marta Vornbrock of the NRC staff, for which the committee is also grateful.

Questions or comments should be directed by e-mail to bmed@nas.edu or by fax to the BMED at (202) 334–3718.

Joseph G.Wirth, Chair

Committee for Review of the Department of Energy’s Industrial Technologies Program

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

Acknowledgments

The Committee for Review of the Department of Energy’s Industrial Technologies Program extends its thanks to the following individuals for their considerable efforts in sourcing, consolidating, and presenting so much information: Jordan Blackman, Technology and Management Services, Inc.; J.Michael Canty, Industrial Technologies Program (ITP), Department of Energy (DOE); Isaac Chan, ITP, DOE; Sara Dillich, ITP, DOE; Simon Friedrich, ITP, DOE; Buddy Garland, ITP, DOE; Robert Gemmer, ITP, DOE; David Godfrey, Atlanta Regional Office, DOE; Ehr-Ping HuangFu, ITP, DOE; Ramesh Jain, ITP, DOE; Elliott Levine, ITP, DOE; Dickson Ozokwelu, ITP, DOE; James Quinn, ITP, DOE; Scott Richlen, ITP, DOE; Thomas Robinson, ITP, DOE; Peter Salmon-Cox, ITP, DOE; Paul Scheihing, ITP, DOE; Brian Valentine, ITP, DOE; Gideon Varga, ITP, DOE; and Harvey Wong, ITP, DOE.

This report has been reviewed in draft form by individuals chosen for their diverse perspectives and technical expertise, in accordance with procedures approved by the National Research Council’s (NRC’s) Report Review Committee. The purpose of this independent review is to provide candid and critical comments that will assist the institution in making its published report as sound as possible and to ensure that the report meets institutional standards for objectivity, evidence, and responsiveness to the study charge. The review comments and draft manuscript remain confidential to protect the integrity of the deliberative process. We wish to thank the following individuals for their review of this report: Daniel Berg, Rensselaer Polytechnic Institute; Geoffrey Boothroyd, Boothroyd Dewhurst, Inc.; William F. Brinkman, Princeton University; Robert H.Doremus, Rensselaer Polytechnic Institute; Neil E.Paton, Liquidmetal Technologies; Bhakta B.Rath, U.S. Department of the Navy; Herman M.Reininga, Rockwell Collins; and Peter A.Thorn, Weyerhaeuser Company.

Although the reviewers listed above have provided many constructive comments and suggestions, they were not asked to endorse the conclusions or recommendations, nor did they see the final draft of the report before its release. The review of this report was overseen by Robert A.Frosch, Harvard University. Appointed by the NRC, he was responsible for making certain that an independent examination of this report was carried out in accordance with institutional procedures and that all review comments were carefully considered. Responsibility for the final content of this report rests entirely with the authoring committee and the institution.

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×

This page intentionally left blank.

Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R1
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R2
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R3
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R4
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R5
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R6
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R7
Page viii Cite
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R8
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R9
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R10
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R11
Suggested Citation:"Front Matter." National Research Council. 2005. Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program. Washington, DC: The National Academies Press. doi: 10.17226/11243.
×
Page R12
Next: Executive Summary »
Decreasing Energy Intensity in Manufacturing: Assessing the Strategies and Future Directions of the Industrial Technologies Program Get This Book
×
Buy Paperback | $29.00 Buy Ebook | $23.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

The U.S. Department of Energy (DOE) has supported the Industrial Technologies Program (ITP) for more than a decade. This program supports R&D into energy efficiency technologies designed to decrease the energy intensity of the U.S. industrial sector. The focus in on seven energy-intensive industries—aluminum, chemicals, forest products, glass, metal casting, mining, and steel—known as the Industries of the Future (IOF). DOE asked the NRC for a review of this program including an evaluation of the ITP strategic plan, an evaluation of the technical quality of individual subprogram plans, and the prospective value of the multi-year program plan. This report presents the results of that review. It contains an assessment of the ITP strategy, of how effective it is being implemented, and the likelihood of achieving program goals. It also provides conclusions about the quality of the subprograms and recommendations about how to strengthen the subprograms and the overall program.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!