Day 2: Tuesday, December 14, 2004
Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.
OCR for page 66
Linkages: Manufacturing Trends in Electronic Interconnection Technology Appendix C Agenda of the Workshop on Manufacturing Trends for Printed Circuit Technology Day 1: Monday, December 13, 2004 8:45 a.m. Welcome and Introductions Purpose of Meeting David Berteau, Chair 9:00 a.m. I: State of the Industry David Bergman, IPC Frank Vargo, National Association of Manufacturers Hayao Nakahara, NT Information, Ltd. Harvey Miller, Fabfile 10:45 a.m. II: Military and Legacy Needs John Shawhan, Warner Robins Air Logistics Center Roger Smith, Naval Surface Warfare Center James Kachmarsky, Tobyhanna Army Depot 1:15 p.m. III: Industry Perspective Herm Reininga, Rockwell Collins Richard Snogren, Coretec Don Dupriest, Lockheed Martin Charles Mullins, Raytheon Benoit Pouliquen, Multek 3:00 p.m. IV: State of the Technology Jack Fisher, iNEMI David Fries, University of South Florida Wayne Johnson, Auburn University 4:30 p.m. Roundtable discussion 5:30 p.m. Adjourn Day 2: Tuesday, December 14, 2004 9:00 a.m. V: Potential Approaches Dick Pinto, Advisor Darrel Frear, Freescale Carolynn Drudik, Defense Microelectronics Activity Ron Thompson, SAIC
OCR for page 67
Linkages: Manufacturing Trends in Electronic Interconnection Technology 11:00 a.m. Facilitated discussion Noon Adjourn
Representative terms from entire chapter: