addresses issues with operational aircraft that are also industry’s responsibility.

Lack of Alternative Sponsors (1): This technology should be undertaken by industry; in the past, DoD has supported this goal as well.

Appropriate Level of Risk (3): This Challenge faces low to moderate risk.

REFERENCES

Calkins, F.T., and G.W. Butler. 2004. Subsonic Jet Noise Reduction Variable Geometry Chevron. AIAA 2004-190, 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nev., January 5-8.

Carman, G.P., and G.P. Sendeckyi. 1995. Review of the mechanics of embedded optical sensor. Journal of Composite Technology and Research 17(3): 183-193.

Chaplya, P.M., and G.P. Carman. 2002. Compression of piezoelectric ceramic at constant electric field: Energy absorption through non-180 degrees domain-wall motion. Journal of Applied Physics 92(3): 1504-1510.

Giesing, J., and J.M. Barthelemy. 1998. A Summary of Industry MDO Applications and Needs. AIAA-1998-4737, 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, St. Louis, Mo., September 2-4. Available online at <http://endo.sandia.gov/AIAA_MDOTC/sponsored/ summary_paper.pdf>.

Giurgiutiu, V., and A.N. Zagrai. 2002. Embedded self-sensing piezoelectric active sensors for on-line structural identification. Journal of Vibration and Acoustics-Transactions of the ASME 124(1): 116-125.

Johnson, W., G. Yamauchi, and M. Watts. 2006. Design and Technology Requirements for Civil Heavy Lift Rotorcraft. Proceedings of the American Helicopter Society Vertical Lift Aircraft Design Conference, San Francisco, Calif., January 18-20.

Lim, T.J., and D.L. McDowell. 1999. Mechanical behavior of an Ni-Ti shape memory alloy under axial-torsional proportional and nonproportional loading. Journal of Engineering Materials and Technology-Transactions of the ASME 121(1): 9-18.

Lin, C.Y., and E.F. Crawley. 1995. Design Considerations for a Strain Actuated Adaptive Wing for Aeroelastic Control. Journal of Intelligent Material Systems and Structures 6(3): 403-410.

Lin, M., and F.K. Chang. 2002. The manufacture of composite structures with a built-in network of piezoceramics. Composites Science and Technology 62(7-8): 919-939.

Moffett, M.B., A.E. Clark, M. Wun-Fogle, J. Linberg, J.P. Teter, and E.A. McLaughlin. 1991. Characterization of terfenol-D for magnetostrictive transducers. Journal of the Acoustical Society of America 89(3): 1448-1455.

National Research Council (NRC). 1998. Ceramic Fibers and Coatings: Advanced Materials for the 21st Century. Washington, D.C.: National Academy Press. Available online at <http://fermat.nap.edu/catalog/6042.html>.

NRC. 2004. Accelerating Technology Transition: Bridging the Valley of Death for Materials and Processes in Defense Systems. Washington, D.C.: The National Academies Press. Available online at <http://fermat.nap.edu/catalog/11108.html>.

Powrie, H.E.G., and C.E. Fisher. 1999. Engine health monitoring: Towards total prognostics. Proceedings of the 1999 IEEE Aerospace Conference 3: 11-20.

Ritter, T., X.C. Geng, K.K. Shung, P.D. Lopath, S.E. Park, and T.R. Shrout. 2000. Single crystal PZN/PT-polymer composites for ultrasound transducer applications. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control 47(4): 792-800.

Shin, D.D., K.P. Mohanchandra, and G.P. Carman. 2004. High frequency actuation of thin film NiTi. Sensors and Actuators A-Physical 111(2-3): 166-171.

Simon, D.L. 2000. An Overview of the NASA Aviation Safety Program Propulsion Health Monitoring Element. 36th Joint Propulsion Conference and Exhibit, Huntsville, Ala., July 16-19.

Sobieszczanski-Sobieski, J., and R.T. Haftka. 1997. Multidisciplinary aerospace design optimization: Survey of recent developments. Structural Optimization 14(1): 1-23.

Stewart, A., G. Carman, and L. Richards. 2003. Nondestructive evaluation technique utilizing embedded thermal fiber optic sensors. Journal of Composite Materials 37(24): 2197-2206.

Ullakko, K., J.K. Huang, V.V. Kokorin, and R.C. O’Handley. 1997. Magnetically controlled shape memory effect in Ni2MnGa intermetallics. Scripta Materialia 36(10): 1133-1138.

Wood, K., T. Brown, R. Rogowski, and B. Jensen. 2000. Fiber optic sensors for health monitoring of morphing airframes: I. Bragg grating strain and temperature sensor. Smart Materials and Structures 9(2): 163-169.



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement