The following HTML text is provided to enhance online
readability. Many aspects of typography translate only awkwardly to HTML.
Please use the page image
as the authoritative form to ensure accuracy.
U.S. Department of Justice, Office of the Inspector General (2005, June). The Bureau ofAlcohol, Tobacco, Firearms and Explosives’ National Integrated Ballistic InformationNetwork Program. (Audit Division, Audit Report #05-30.) Washington, DC: U.S. Department of Justice.
Vinci, F., R. Falamingo, C.P. Campobasso, and J.A. Bailey (2005). Morphological study of class and individual characteristics produced by firing 2500 cartridges in a .45 caliber semi-automatic pistol. AFTE Journal 37(4), 368–373.
Vorburger, T., J.H. Yen, B. Bachrach,T.B. Renegar, J.J. Filliben, L. Ma, H.-G. Rhee, A. Zheng, J.-F. Song, M. Riley, C.D. Foreman, and S.M. Ballou (2007). Surface Topography Analysis for a Feasibility Assessment of a National Ballistics Imaging Database. (NISTIR 7362; revision December 26, 2006.) Report prepared for the Committee to Assess the Feasibility, Accuracy, and Technical Capability of a National Ballistics Database under National Institute of Justice Grant 2003-IJ-R-029 with the NIST Office of Law Enforcement Standards. Gaithersburg, MD: National Institute of Standards and Technology.
Wellford, C., and J. Cronin (1999, October). An Analysis of Variables Affecting the Clearance of Homicides: A Multistate Study. Washington, DC: Justice Research and Statistics Association.
Wellford, C., and J. Cronin (2000). Clearing up homicide clearance rates. NIJ Journal (April), 3–7.
Wilson, C., R.A. Hicklin, H. Korves, B. Ulery, M. Zoepfl, M. Bone, P. Grother, R. Micheals, S. Otto, and C. Watson (2004). Fingerprint Vendor Technology Evaluation 2003: Summary of Results. (IR 7123.) Gaithersburg, MD: National Institute of Standards and Technology.
Yamamura, K. (2005a, August 25). Bullet serial number proposal is tabled. Sacramento Bee, p. A5.
Yamamura, K. (2005b, May 1). Marking bullets would help cops, supporters say. SacramentoBee,p.A3.
Yborra, L.F., and J.R. McClary (2004). Toolmarks on Remington 9mm luger caliber ammunition. AFTE Journal 36(4), 308–310.
Zeosky, G.F. (2005, December). Letter to staff of the Committee on the Feasibility, Accuracy, and Technical Capability of a National Ballistics Database.
Zographos, A., M. Robinson, J. Evans, and C.L. Smith (1997). Ballistics identification using line-scan imaging techniques. Pp. 82–87 in Proceedings of the Institute of Electrical andElectronics Engineers 31st Annual 1997 International Carnahan Conference on SecurityTechnology.