Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter.
Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.
OCR for page 146
Assessment of Corrosion Education
Appendix E
Agendas for Materials Forum 2007 and Committee Public Meetings
MATERIALS FORUM 2007: CORROSION EDUCATION FOR THE 21ST CENTURY
March 30, 2007—Washington, D.C.
SESSION I: MOTIVATION Moderator, Ralph Adler, Army Research Laboratory
8:00 am
Welcome and setting the scene
Fiona Doyle, Forum Chair
8:10
Introduction of Session I participants
Gary Fischman, NMAB
8:15
Cost of corrosion
Neil Thompson, CC Technologies
8:40
DOD’s mandate on corrosion
Daniel Dunmire, DOD-OSD
DOD’s corrosion and national security needs
Lewis Sloter, DOD-OSD
9:05
The need for corrosion engineering curriculum
Aziz I. Asphahani and Helena Seelinger, NACE Foundation
OCR for page 147
Assessment of Corrosion Education
SESSION II: CURRENT PRACTICE Moderator, John Scully, University of Virginia
10:10 am
Introduction of Session IIparticipants
Michael Moloney, NMAB
10:15
AMPTIAC ad hoc study on corrosion education
David Rose, Quanterion Solutions, Inc.
10:30
Corrosion education: materials science
Gerald Frankel, Ohio State University
10:45
Corrosion education: mechanical engineering
Matthew Begley, University of Virginia
11:00
Corrosion education: industry needs and response
Robert Schafrik, GE Aviation
11:15
Corrosion education: industry needs and response
Ramesh Sharma, Raytheon
11:30
Panel discussion
WORKING LUNCH WITH TALK
Noon
The Challenge of Change in a Change-Resistant Environment
Luis M. Proenza, University of Akron
SESSION III: IMPLEMENTATION Moderator, Ron Latanision, Exponent, Inc.
1:15 pm
Introduction of Session III participants
Gary Fischman, NMAB
1:20
Perspectives on implementation
Ron Latanision, Exponent, Inc.
1:30
Response from panel members (2 minutes each) followed by panel discussion with audience participation
George Dieter, University of Maryland
Robert Dodds, University of Illinois, Urbana-Champaign
David Duquette, Rensselaer Polytechnic Institute
Mark Plichta, Michigan Technical University
Lee Saperstein, University of Missouri, Rolla
Mark Soucek, University of Akron
OCR for page 148
Assessment of Corrosion Education
SESSION IV: NEXT STEPS Moderator, Fiona Doyle, University of California, Berkeley
3:00 pm
Overview of workshop
Fiona Doyle, Forum Chair
3:15
Looking forward to the follow-on study
Wesley Harris, ACE Chair
3:15
Discussion of NRC’s corrosion education study
4:00
Adjourn
MEETING OF THE COMMITTEE ON ASSESSING CORROSION EDUCATION (ACE)
June 20, 2007—Washington, D.C.
Noon
MEETING CONVENES IN OPEN SESSION
Lunch
1:00 pm
Welcome and introduction of committee and guests
Wesley Harris, Chair
1:05
Sponsor presentation, DOD
Dan Dunmire, OSD-ATL
1:45
Other government perspectives
Robert Hanrahan, DOE-NNSA
Joseph Carpenter, DOE-EERE
Harriet Kung, DOE-DMS&E
2:45
Break
3:05
Congressional perspective
Vickie Plunkett, House Armed Services Committee
3:35
Origin of the study
David Rose, Quanterion
4:05
Open discussion between panel and guests on presentations and implications for the study
6:00
MEETING CONVENES IN CLOSED SESSION
OCR for page 149
Assessment of Corrosion Education
June 21, 2007
7:30 am
MEETING CONVENES IN CLOSED SESSION
Working breakfast and discussion, committee and staff
8:15
MEETING CONVENES IN OPEN SESSION
Recalling the corrosion education workshop
Some retrospective thoughts on the workshop from Fiona Doyle, CEWOP Chair
Open discussion with all committee and guests, led by Fiona Doyle, CEWOP Chair
10:00
Break
10:20
MEETING CONVENES IN CLOSED SESSION
MEETING OF THE COMMITTEE ON ASSESSING CORROSION EDUCATION
September 17, 2007—Detroit, Michigan
9:45 am
MEETING CONVENES IN OPEN SESSION
Government panel session moderator: John Scully, ACE
Kayle Boomer, Hanford Nuclear Waste Storage Facility
Steven Carr, Army Aviation and Missile Command
Vincent Hock, U.S. Army Corps of Engineers
Bill Kepler, U.S. Bureau of Reclamation
Stephen Sharp, Virginia Transportation Research Council
12:15 pm
Working lunch
1:15
University panel session moderator: Gerald Frankel, ACE
Jo Howze, Texas A&M University
Alex King, Purdue University
Ian Robertson, University of Illinois
Subra Suresh, Massachusetts Institute of Technology
Peter Voorhees, Northwestern University
3:45
Break
4:00
Open microphone discussion (community input)
5:00
MEETING CONVENES IN CLOSED SESSION
OCR for page 150
Assessment of Corrosion Education
MEETING OF THE COMMITTEE ON ASSESSING CORROSION EDUCATION
December 17, 2007—Irvine, California
10:00 am
MEETING CONVENES IN OPEN SESSION
Industry panel session moderators: Gordon Bierwagen, ACE, and Gary Was, ACE
Aziz Asphanhani, Carus Chemical Company
William Hedges, BP
Michael J. Maloney, Pratt & Whitney
Robert Mroczkwski, connNtext
Michael R. Ostermiller, General Motors
Leslie Spain, Dominion Generation
Darrel Untereker, Medtronic
Noon
Working lunch
1:00 pm
University panel session moderators: Gerald Frankel, ACE, and John Scully, ACE
Reza Abbaschian, University of California, Riverside
Robert Cottis, University of Manchester
Anthony Luscher, Ohio State
Matthew O’Keefe, University of Missouri, Rolla
Lt. Michael Plumley, U.S. Coast Guard Academy
Bob Sinclair, Stanford University
Dan Walsh, Cal Poly, San Luis Obispo
Ward Winer, Georgia Institute of Technology
3:00
Break
3:30
NACE/University of Akron, Sue Louscher, corrosion survey
4:30
General discussion
5:00
MEETING CONVENES IN CLOSED SESSION