Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
Study Committee Biographical Information R. Keith Michel, Chair, is former President and current Board Chairman of Herbert Engineering Corporation. In more than 25 years with the com- pany, he has worked on design, speciï¬cation development, and contract negotiations for containerships, bulk carriers, and tankers. Mr. Michel has served on numerous industry advisory groups developing guidelines for alternative tanker designs, including groups advising the International Maritime Organization and the U.S. Coast Guard. His work has included development of methodology, vessel models, and oil outï¬ow analysis. He was a project engineer for the U.S. Coast Guardâs report on oil out- ï¬ow analysis for double-hull and hybrid tanker arrangements, which was part of the U.S. Department of Transportationâs technical report to Con- gress on the Oil Pollution Act of 1990. He has also worked on the devel- opment of salvage software used by the U.S. and Canadian Coast Guards, the U.S. Navy, the National Transportation Safety Board, the Maritime Administration, the American Bureau of Shipping, Lloydâs, and numerous oil and shipping companies. Mr. Michel was chair of the Transportation Research Boardâs Marine Board from 2002 through 2004 and has served on several National Research Council committees. Mr. Michel received a BS in naval architecture and marine engineering from the Webb Insti- tute of Naval Architecture. Bruce R. Ellingwood (Member, National Academy of Engineering) is Professor in the School of Civil and Environmental Engineering at the Georgia Institute of Technology. He is recognized for leadership in the use of probability and statistics in the design of structures and in the devel- opment of new design criteria. His main research and professional inter- ests concern the application of methods of probability and statistics to 160
Study Committee Biographical Information 161 support the practice of structural engineering. The role of structural design codes is to manage risk arising from the uncertainties inherent in struc- tural engineering and thereby ensure adequate public safety. Thus, the focal points of Dr. Ellingwoodâs research have included probabilistic mod- eling of structural loads, statistical studies of the performance of structures, development of safety and serviceability criteria for structural design, studies of the response of structures to severe ï¬res and other abnormal loads, and risk assessment of civil infrastructure projects. Dr. Ellingwood received a BS, an MS, and a PhD in civil engineering from the University of Illinois at UrbanaâChampaign. George M. Hagerman, Jr., is a research faculty member at Virginia Polytechnic Institute and State Universityâs Advanced Research Insti- tute and Director of Offshore Wind Research for the Virginia Coastal Energy Research Consortium, a publicâprivateâuniversity partnership. Mr. Hagerman has almost 30 years of experience in evaluating and opti- mizing the design, performance, and economics of marine renewable energy systems, including offshore wind power, wave power, tidal power, and ocean thermal energy conversion. Mr. Hagerman served as an oceanographer on the Electric Power Research Instituteâs Ocean Energy Team. He received a BS in zoology and an MS in marine sciences, both from the University of North Carolina at Chapel Hill. Jan Behrendt Ibsoe was recently named Vice President for Global Renew- able Energy at ABS Consulting. Earlier, he served as global director of renewable energy at Société Général de Surveillance in Germany and worked for 8 years at Det Norske Veritas (DNV) in Denmark. DNV is heavily involved in international standards development for offshore wind turbines. It has provided project certiï¬cation for offshore wind tur- bines throughout Europe and in China and type certiï¬cation for onshore wind turbines. Dr. Ibsoeâs focus in these positions has been offshore and onshore wind and solar energy. Previously, he worked in the offshore oil and gas industry. Dr. Ibsoe received an MS in civil engineering and a PhD in fatigue and fracture mechanics analyses of offshore welded struc- tures, both from the Technical University of Denmark. Lance Manuel is Professor and Fluor Centennial Teaching Fellow in the Department of Civil, Architectural, and Environmental Engineering at the
162 Structural Integrity of Offshore Wind Turbines University of Texas at Austin. His research work related to wind energy (funded by the National Science Foundation, the Department of Energy, and the Texas Higher Education Coordinating Board) has focused on the statistical analysis of inï¬ow and turbine loads data, on characterization of the spatial coherence in inï¬ow turbulence, and on establishing design loads using inverse reliability techniques. His work related to offshore wind turbines has included the consideration, in reliability analyses, of alternative foundation models for monopiles; nonlinear waves in shal- low waters; wind-wave correlation at near-shore sites; and the coupled dynamics in motions and loads on a spar buoy-supported ï¬oating off- shore wind turbine. He received a BTech in civil engineering from the Indian Institute of Technology (Bombay), an MS in civil engineering and applied mechanics from the University of Virginia, and a PhD in civil engineering from Stanford University. Walt Musial is a principal engineer at the National Renewable Energy Lab- oratory (NREL). He leads the offshore wind research at NREL, including offshore technology characterization, resource assessment, and technology development. He started at NREL as a test engineer on the unsteady aero- dynamics experiment. Mr. Musial led the testing team at NRELâs National Wind Technology Center and was responsible for building and operating NRELâs full-scale component facilities for testing wind turbine blades and drivetrains. Before joining NREL, he worked for 5 years in the commercial wind energy industry in California. He holds a BS and an MS in mechani- cal engineering from the University of Massachusetts at Amherst. Robert E. Sheppard is a principal consultant with Energo Engineering, an engineering consulting ï¬rm specializing in advanced analysis, integrity management, and risk and reliability. He has more than 20 years of expe- rience in structural engineering with a focus on assessment and repair of offshore structures and structural integrity management. He has exten- sive experience with design certiï¬cation of offshore structures in addi- tion to third-party reviews of design and installation of offshore facilities. Mr. Sheppard has developed guidelines for the inspection of offshore wind turbine facilities, including the substructure, tower, nacelle, and blades. These projects blended the existing operating experience from offshore oil and gas facilities with the unique requirements of wind tur- bine facilities. Mr. Sheppard holds a BS in civil engineering from Rice
Study Committee Biographical Information 163 University and an MS in structural engineering from the University of California, Berkeley. Emil Simiu is a fellow at the National Institute of Standards and Technol- ogy (NIST), Structures Group. His research has included the estimation of wind and wave effects on buildings, bridges, and deepwater offshore plat- forms; structural reliability; and structural, ï¬re, and chaotic dynamics. He has developed the database-assisted design concept and pioneered its systematic use for structures subject to wind loads. Dr. Simiu is a Fellow of the American Society of Civil Engineers (ASCE); served as chairman of its Committees on Wind Effects, Dynamic Effects, and the Reliability of Offshore Structures; and is a distinguished member of the ASCE Standard Committee on Loads. Before joining NIST, he worked as an engineer in the private sector. Dr. Simiu has served as a research professor at several uni- versities. He holds a degree in building engineering from the Bucharest Institute of Civil Engineering, an MS in applied mechanics from the Polytechnic Institute of Brooklyn, and a PhD in civil and geological engi- neering from Princeton University. Susan W. Stewart is a research associate in the Aerospace Engineering and Architectural Engineering Departments at the Pennsylvania State University. She was formerly with the Applied Research Laboratory at Pennsylvania State University as well as the Strategic Energy Institute at the Georgia Institute of Technology. Her research focuses on wind energy, energy efï¬ciency, hybrid renewables systems, SmartGrid analysis, and renewable energy workforce development. She has performed technol- ogy assessments involving economic and efï¬ciency analysis of offshore wind energy and has worked on wind energy resource assessment and offshore wind farm design, particularly in the South Atlantic Bight. She holds a BS in mechanical engineering from Pennsylvania State Univer- sity and an MS and a PhD in mechanical engineering from the Georgia Institute of Technology. David J. Wisch is a Chevron Fellow at Chevron Energy Technology Company (ETC), Facilities Division. He currently is the Technical Team Lead of the Integrity Management Team in ETCâs Civil, Structural, and Marine Engineering Unit. He was previously the engineer of record for the ï¬rst platform in the United States to undergo certiï¬cation by a certiï¬ed
164 Structural Integrity of Offshore Wind Turbines veriï¬cation agent and provided engineering oversight for the worldâs deepest self-standing structure. Mr. Wisch has been engaged for more than 30 years in industry standards development at the American Petro- leum Institute (API) and the International Organization for Standard- ization (ISO). He chaired the API committee on ï¬xed platforms and led the U.S. delegation to the ISO offshore standards committee. After Hur- ricanes Ivan, Katrina, and Rita (2004â2005), he led an API task force to develop a consensus interim industry standard for mooring of ï¬oating drilling vessels. He served for 6 years on the Marine Board. Mr. Wisch received an MS in civil engineering from the University of MissouriâRolla and has done postgraduate work in civil and structural engineering at Tulane University.