Shariff, A. M., and D. Zaini. 2010. Toxic release consequence analysis tool (TORCAT) for inherently safer design plant J. Hazard. Mater. 182(1-3):394-402.
Shariff, A. M., R. Rusli, C. T. Leong, V. R. Radhakrishnan, and A. Buang. 2006. Inherent safety tool for explosion consequences study. J. Loss Prevent. Proc. Ind.. 19(5):409-418.
Sorensen, J. H., Shumpert, B. L. and. Vogt, B. M. (2004). Planning for protective action decision making: evacuate or shelter-in-place. /Hazard. Mater.. A109, 1-11.
Spurgin, A. J. (2010). Human Reliability Assessment: Theory and Practice. Boca Raton: CRC Press. Srinivasan, R., and A. Kraslawski. 2006. Application of the TRIZ creativity enhancement approach to design of inherently safer chemical processes. Chem. Eng. Process. 45(6):507-514.
Srinivasan, R., and N. T. Nhan. 2008. A statistical approach for evaluating inherent benign-ness of chemical process routes in early design stages. Process Saf. Environ. Protect. 86(3):163-174.
Swain, A. D., and H. E., Guttmann. 1983. Handbook on Human Reliability Analysis with Emphasis on Nuclear Power Plant Application. NUREG/CR-1278. SAND 80-0200 RX, AN. Final Report.
Rockville, MD: U.S. Nuclear Regulatory Commission.
Tugnoli, A., G. Landucci, and V. Cozzani. 2009. Key performance indicators for inherent safety: Application to the hydrogen supply chain. Process Saf. Prog. 28(2):156-170.
U.S. Department of Labor. Occupational Health and Safety Administration. Process safety management of highly hazardous chemical. (29 CFR § 1910.119) [online]. Available at http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=STANDARDS&p_id=9760. Accessed: April 6, 2011.
Van Willigen, M., T. Edwards, B. Edwards, and S. Hessee. 2002. Riding out the storm: The experiences of the physically disabled during Hurricanes Bonnie, Dennis, and Floyd. Natural Hazards Review 3(3):98-106.
Windhorst, J. C. A. 1995. Application of inherently safe design concepts, fitness for use and risk driven design process safety standards to an LPG project. In Loss Prevention and Safety Promotion in the Process Industries, ed. J. J. Mewis, Hans J. Pasman, and E. E. De Rademacker, 543-54. Amsterdam: Elsevier Science B. V.