National Academies Press: OpenBook
« Previous: Chapter Six - Conclusions and Future Research Needs
Page 63
Suggested Citation:"References." National Academies of Sciences, Engineering, and Medicine. 2005. Inspection and Maintenance of Bridge Stay Cable Systems. Washington, DC: The National Academies Press. doi: 10.17226/13689.
×
Page 63
Page 64
Suggested Citation:"References." National Academies of Sciences, Engineering, and Medicine. 2005. Inspection and Maintenance of Bridge Stay Cable Systems. Washington, DC: The National Academies Press. doi: 10.17226/13689.
×
Page 64
Page 65
Suggested Citation:"References." National Academies of Sciences, Engineering, and Medicine. 2005. Inspection and Maintenance of Bridge Stay Cable Systems. Washington, DC: The National Academies Press. doi: 10.17226/13689.
×
Page 65
Page 66
Suggested Citation:"References." National Academies of Sciences, Engineering, and Medicine. 2005. Inspection and Maintenance of Bridge Stay Cable Systems. Washington, DC: The National Academies Press. doi: 10.17226/13689.
×
Page 66
Page 67
Suggested Citation:"References." National Academies of Sciences, Engineering, and Medicine. 2005. Inspection and Maintenance of Bridge Stay Cable Systems. Washington, DC: The National Academies Press. doi: 10.17226/13689.
×
Page 67

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

63 Aas-Jakobsen, K., E. Jordet, and S.K. Rambjor, “Full-Scale Measurements of the Behavior of the Helgeland Bridge, A Cable Stayed Bridge Located in a Harsh Environment” [Online]. Available: http://www.aas-jakobsen.no/Bridges/ Publications/Helgeland_Bridge/full_scale_measurements. Akers, D.W. and C.A. Rideout, “Innovative Nondestructive Inspection Technology for Quantifying Deterioration in Bridge Structures and Cables Using Induced Positron Anni- hilation Technologies,” Proceedings of Structural Materials Technology (SMT): NDE/NDT for Highways and Bridges, Buffalo, N.Y., Sep. 2004. Andersen, E.Y., D.L. Hommel, and E.M. Veje, “Emer- gency Rehabilitation of the Zarate–Brazo Largo Bridges, Argentina,” Proceedings of the IABSE Conference, Cable- Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 698–706. Angelo, W., “Lasers Ensure Stay Cable Safety,” Engineering News Record, Vol. 239, No. 4, July 28, 1997, pp. 10–11. “B&N Creates Custom Device for Florida Cable-Stay Inspec- tion,” brochure, Burgess & Niple, Columbus, Ohio, 2005. Bartels, K.A., H. Kwun, and J.J. Hanley, “Magnetostrictive Sensors for the Characterization of Corrosion in Rebars and Prestressing Strands,” SPIE Proceedings, Vol. 2946, 1996, pp. 40–50. Barton, J.R., C.M. Teller, and S.A. Suhler, Design, Develop, and Fabricate a Prototype Nondestructive Inspection and Monitoring System for Structural Cables and Strands of Suspension Bridges, Report FHWA-RD-89-158, Federal Highway Administration, Washington, D.C., 1989, 133 pp. Barton, S.C., G.W. Vermaas, P.F. Duby, A.C. West, and R. Betti, “Accelerated Corrosion and Embrittlement of High- Strength Bridge Wire,” Journal of Materials in Civil Engi- neering, Vol. 12, No. 1, Feb. 2000, pp. 33–38. Bergamini, A., R. Christen, and M. Motavalli, “A Simple Approach to the Automatic Recognition of Flaws in Large Diameter Steel Cables,” 2003 [Online]. Available: http://www.ndt.net/article/ndtce03/papers/p019/p019.htm. Bierwagen, D., “Burlington Cable-Stayed Bridge Design and Construction Summary,” Iowa Department of Trans- portation Office of Bridges and Structures, informational report prepared for FHWA and others, 33 pp., nd. Bloomstine, M.L. and E. Stoltzner, “The Faroe Cable-Stayed Bridge—Maintenance Experience with Major Compo- nents,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 688–697. Bournand, Y., “Development of New Stay Cable Dampers,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 559–566. Bridge Design and Engineering, London, United Kingdom, 2005 [Online]. Available: http://www.bridgeweb.com/ magazine/FeatureDetails.cfm?ArticleID=9. Brönnimann, R., P.M. Nellen, and U. Sennhauser, “Applica- tion and Reliability of a Fiber Optical Surveillance System for a Stay Cable Bridge,” Smart Materials and Structures, Vol. 7, 1998, pp. 229–236. Brown, J.L., “Hong Kong to Boast World’s Longest Cable- Stayed Bridge,” Civil Engineering, Vol. 71, No. 1, Jan. 2001a, p. 10. Brown, J.L., “Long Cable-Stayed Span Planned for St. Louis,” Civil Engineering, Vol. 71, No. 11, Nov. 2001b, p. 16. Brown, K. and J. St Leger, “Use of the Megascan™ Imag- ing Process Inspection Systems for Post-Tensioned Bridge and Other Major Structures,” 2003 [Online]. Available: http://www.ndt.net/article/ndtce03/papers/v021/ v021.htm. Bruce, R., R. Drake, C. Sperry, and H. Thompson, “Aerody- namic Monitoring of the Cable-Stayed Mississippi River Bridge,” IABSE Colloquium: Monitoring of Large Struc- tures and Assessment of Their Safety,” Bergamo, Italy, IABSE Reports, Vol. 56, 1987, pp. 191–203. “Cable Stays of Cable-Stayed Bridges,” Technical Advisory T 5140.25, Federal Highway Administration, Washington, D.C., June 17, 1994. Casas, J.R., “A Combined Method for Measuring Cable Forces: The Cable-Stayed Alamillo Bridge, Spain,” Struc- tural Engineering International, No. 4, 1994, pp. 235–240. Christenson, R.E., B.F. Spencer, and E.A. Johnson, “Experi- mental Verification of Semiactive Damping of Stay Cables,” Proceedings of the 2001 American Control Conference, Arlington, Va., June 25–27, 2001, pp. 5058–5063. Christoffersen, J., L. Hauge, H. Elgaard Jensen, and J. Bjerrum, “Design and Construction of a CFRP Cable Stayed Foot- bridge,” Proceedings of the IABSE Conference, Cable- Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 135–144. Ciolko, A.T. and H. Tabatabai, “Condition Evaluation of Pre- stressed Steel Strands in Concrete Bridges,” Document 23, Transportation Research Board, National Research Coun- cil, Washington, D.C. [Online]. Available: http://www4. nationalacademies.org/trb/CRP.nsf/all+projects/NCHRP+ 10-53 [Sep. 1999]. Ciolko, A.T. and W.P. Yen, “An Immediate Payoff from FHWA’s NDE Initiative,” Public Roads, May/June 1999, Vol. 62, No. 6, pp. 10–17. Cunha, A. and E. Caetano, “Dynamic Measurements on Stay Cables of Cable-Stayed Bridges Using an Interferometry Laser System,” Experimental Techniques, May/June 1999, pp. 38–43. Desimone, C., P. Katchadjian, M. Tacchia, and R. Giacchetta, “Damage Detection on Wires of Ropes Applying Ultra- sonic Waves,” 10th Asia–Pacific Conference on Non- Destructive Testing, Brisbane, Australia, Sep. 17–21, 2001 [Online]. Available: http://www.ndt.net/article/apcndt01/ papers/1023/1023.htm. REFERENCES

Dowd, J., M. Poser, K.H. Frank, S.L. Wood, and E.B. Williamson, “Bending Fatigue of Cable Stays,” Journal of Bridge Engineering, Vol. 6, No. 6, Nov./Dec. 2001, pp. 639–644. DSI, “Maumee Stay Cable Bridge Breaks World Record” [Online]. Available: http://www.dywidag-systems.com/ docs/markets.php?market=Bridges&content=maumee, 2004. Elgamal, A., F. Seible, F. Vernon, M. Trivedi, and M. Fraser, “On-Line Structural Monitoring and Data Management,” Proceedings of the 6th Seismic Research Workshop, Califor- nia Department of Transportation, Sacramento, June 2001. Elliott, M.E. and E. Heymsfield, “Inspection of Luling Bridge Cable Stays: Case Study,” Journal of Construction Engi- neering and Management, Vol. 129, No. 2, April 2003, pp. 226–230. Fisher, K. and S. Bassett, “Cables, Strands, and Rods Keep Tension High,” High-Performance Composites, July/Aug. 1997, pp. 23–29. Frank, K.H. and J.E. Breen, “Durability of Stay Cable,” Pro- ceedings of the High Performance Stay Cable Systems Seminar, sponsored by Freyssinet International, Washing- ton, D.C., Oct. 1, 2004. Funahashi, M., “Reliable Corrosion Protection for Bridge Stay Cables,” Concrete International, Vol. 17, No. 2, Feb. 1995, pp. 33–37. Ghorbanpoor, A., “Evaluation of Prestressed Concrete Gird- ers Using Magnetic Flux Leakage,” Proceedings of the 1999 ASCE Structures Congress, Structural Engineer- ing in the 21st Century, New Orleans, La., Apr. 1999, pp. 284–287. Gimsing, N.J., Cable-Supported Bridges—Concept and Design, 2nd ed., John Wiley, Chichester, West Sussex, England, 1998, 471 pp. Gimsing, N.J., “History of Cable-Stayed Bridges,” Proceed- ings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 8–24. Grant, A., “Cables Not in Trouble,” Civil Engineering, Vol. 61, No. 5, May 1991, pp. 61–63. Hamilton, H.R. and J.E. Breen, “International Survey of Current Opinion on Bridge Stay Cable Systems,” Pro- ceedings of the IABSE Symposium Extending the Lifespan of Structures, San Francisco, Calif., Aug. 23–25, 1995, pp. 843–853. Hamilton, H.R., J.E. Breen, and K.H. Frank, “Bridge Stay Cable Corrosion Protection. I: Grout Injection and Load Testing,” Journal of Bridge Engineering, Vol. 3, No. 2, May 1998a, pp. 64–71. Hamilton, H.R., J.E. Breen, and K.H. Frank, “Bridge Stay Cable Corrosion Protection. II: Accelerated Corrosion Tests,” Journal of Bridge Engineering, Vol. 3, No. 2, May 1998b, pp. 72–81. Harris, C.A., “Cradle System Anchors Stay Cables to Decks,” Civil Engineering, Vol. 72, No. 3, 2002, p. 36. 64 Hemmert, H.A. and S. Sczyslo, “Corrosion Protection of Locked Coil Ropes at Road Bridges,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 586–595. Hooks, J., et al., “FHWA Study Tour for Advanced Compos- ites in Bridges in Europe and Japan,” National Transporta- tion Library, Washington, D.C., Oct. 1997 [Online]. Avail- able: http://ntl.bts.gov/DOCS/advcom3a.html. “Immersion of Stays Protects Bridge Cables,” Civil Engi- neering News, Vol. 5, No. 1, Feb. 1993, p. 9. Irwin, P., “Wind Vibrations of Cables on Cable-Stayed Bridges,” Proceedings of the ASCE Structures Congress XV, Building to Last, Vol. 1, Portland, Ore., April 13–16, 1997, pp. 383–387. Ito, M., “Stay Cable Technology: Overview,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 481–490. Jensen, C.N., S.R.K. Nielsen, and J.D. Sorensen, “Optimal Damping of Stays in Cable-Stayed Bridges for In-Plane Vibrations,” Journal of Sound and Vibration, Vol. 256, No. 3, 2002, pp. 499–513. Johnson, E.A., G.A. Baker, B.F. Spencer, and Y. Fujino, “Semiactive Damping of Stay Cables,” 2002 [Online]. Available: http://rcf.usc.edu/∼johnsone/papers/smartdamp- ing_tautcable_jem.html. Johnson, E.A., G.A. Baker, B.F. Spencer, and Y. Fujino, “Mitigating Stay Cable Oscillation Using Semiactive Damping,” Proceedings of the Smart Structures and Materials 2000: Smart Systems for Bridges, Structures, and Highways, S.C. Liu, Ed., SPIE, Vol. 3988, pp. 207–216. Jones, N.P. and M. Porterfield, “Measurement of Stay-Cable Vibration,” Proceedings of the ASCE Structures Congress XV—Building to Last, ASCE, Portland, Ore., April 13–16, 1997, pp. 1290–1294. Keating, S., T.N. Claytor, A. Davis, and M. Sheats, “Techno- logical Advancements for High-Speed Industrial Computed Tomography,” Proceedings of the Structures Congress 2000—Advanced Technology in Structural Engineering, Philadelphia, Pa., May 8–10, 2000. Kitagawa, M., S. Suzuki, and M. Okuda, “Assessment of Cable Maintenance Technologies for Honshu–Shikoku Bridges,” Journal of Bridge Engineering, Vol. 6, No. 6, Nov./Dec. 2001, pp. 418–424. Ko, J.M., G. Zheng, Z.Q. Chen, and Y.Q. Yi, “Field Vibration Tests of Bridge Stay Cables Incorporated with Magneto- Rheological (MR) Dampers,” Proceedings of SPIE—The International Society for Optical Engineering, Vol. 4696— Smart Structures and Materials 2002, Smart Systems for Bridges, Structures, and Highways, pp. 30–40. Kovacs, I., “Zur frage der seilschwingungen und der seildamp- fung,” Die Bautechnik, 10, pp. 325–332 (in German). Kumarasena, S., N.P. Jones, P. Irwin, and P. Taylor, Wind Induced Vibration of Stay Cables, Report submitted to the

65 Federal Highway Administration, Contract No. DTFH61- 99-C-00095, 2002. Kwun, H., “Waves of the Future,” SwRI Technology Today Article, 2003 [Online]. Available: http://www.swri.edu/ 3pubs/ttoday/fall03/Future.htm. Lankin, J., J. Kilpatrick, P.A. Irwin, and N. Alca, “Wind- Induced Stay Cable Vibrations—Measurement and Miti- gation,” Proceedings of the ASCE Structures Congress, Philadelphia, Pa., May 8–10, 2000. Larose, G.L. and L. Wagner Smitt, “Rain/Wind Induced Vibrations of Parallel Stay Cables,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Pres- ent, and Future, Malmo, Sweden, June 1999, pp. 310–311. Little, B., R. Staehle, and R. Davis, “Fungal Influenced Corrosion of Post-Tensioned Cables,” International Bio- deterioration and Biodegradation, Vol. 47, No. 2, 2001, pp. 71–77. Liu, W., R. Hunsperger, M. Chajes, K. Folliard, and E. Kunz, “Corrosion Detection of Steel Cables Using Time Domain Reflectometry,” Journal of Materials in Civil Engineer- ing, Vol. 14, No. 3, 2002, pp. 217–223. Main, J.A. and N. P. Jones, “A Comparison of Full-Scale Mea- surements of Stay Cable Vibration,” Proceedings of the ASCE Structures Congress, Philadelphia, Pa., May 8–10, 2000. Main, J.A. and N.P. Jones, “Evaluation of Viscous Dampers for Stay-Cable Vibration Mitigation,” Journal of Bridge Engineering, Vol. 6, No. 6, Nov./Dec. 2001, pp. 385–397. Main, J.A. and N.P. Jones, “Free Vibrations of Taut Cable with Attached Damper: I. Linear Viscous Damper,” Jour- nal of Engineering Mechanics, Vol. 128, No. 10, Oct. 2002, pp. 1062–1071. Marsh, D., “Cable Ready,” Concrete Products, April 2003 [Online]. Available: http://concreteproducts.com/mag/ concrete_cable_ready/. Matsumoto, M., “Inclined Cable Aerodynamics of Cable- Stayed Bridges,” Proceedings of the ASCE Structures Congress, Philadelphia, Pa., May 8–10, 2000. Mayrbaurl, R.M. and S. Camo, NCHRP Report 534: Guide- lines for Inspection and Strength Evaluation of Suspen- sion Bridge Parallel-Wire Cables, Transportation Re- search Board, National Research Council, Washington, D.C., 2004. Mehrabi, A.B., H. Tabatabai, and H.R. Lotfi, “Damage Detection in Structures Using Precursor Transformation Method,” Journal of Intelligent Material Systems and Structures, Vol. 9, No. 10, Oct. 1999, pp. 808–817. Miyazaki, M., “Aerodynamic and Structural Dynamic Control System of Cable-Stayed Bridge for Wind Induced Vibra- tion,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 86–94. Mizoe, M., S. Muroi, T. Horii, T. Isobe, R. Kiyota, and Y. Imada, “The Super High Damping Rubber Damper on the Stay Cables of the Meiko East Bridge,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999. Noro, T., S. Konno, and H. Maikuma, “Material Properties of Carbon-Fiber Cables for Suspension Bridges,” Proceedings of the IABSE Conference, Cable-Supported Bridges, Chal- lenging Technical Limits, Seoul, Korea, June 12–14, 2001, pp. 126–127. Pacheco, B.M., Y. Fujino, and A. Sulekh, “Estimation Curve for Modal Damping in Stay Cables with Viscous Damper,” Journal of Structural Engineering, Vol. 119, No. 6, June 1993, pp. 1961–1979. Phelan, R.S., P.P. Sarkar, K.C. Mehta, T.B. Gardner, and Z. Zhan, “Distributed Aerodynamic and Mechanical Damping of Cables with Active Smart Control,” USPTO Patent No. 6,435,323 B2, Aug. 20, 2002. Phelan, R.S., P.P. Sarkar, K.C. Mehta, T. B. Gardner, and Z. Zhan, “Cable Stay Damper Band and Method of Use for Reduction of Fluid Induced Cable Vibrations,” USPTO Patent No. 6,705,440 B2, Mar. 16, 2004. Pla-Rucki, G.F. and M.O. Eberhard, “Imaging of Rein- forced Concrete: State-of-the-Art Review,” Journal of Infrastructure Systems, Vol. 1, No. 2, June 1995, pp. 134–141. Podolny, W., “Cable-Stayed Bridges—Future Developments, North American Viewpoint,” ASCE Annual Convention, New York, N.Y., Sep. 13–17, 1992. Poston, R.W., “Evaluation and Mitigation of Rain Vibration of Stay Cables,” 2002 [Online]. Available: http://www. asbi-assoc.org/news_research/winter_02/vibration.cfm. Prato, C.A. and M.A. Ceballos, “Dynamic Bending Stresses Near the Ends of Parallel-Bundle Stay Cables,” Structural Engineering International, Vol. 13, No. 1, Feb. 2003, pp. 64–68. Prato, C.A., M.A. Ceballos, P.J.F. Huerta, C.F. Gerbaudo, C.E. Grunbaum, and D.L. Hommel, “Diagnosis, Con- struction Procedures, and Design Recommendations for Replacement of Cables in Cable-Stayed Bridges: Experi- ence from Two Current Cases in Argentina,” Proceedings of the US–Canada Workshop of Bridge Engineering, July 1997, pp. 303–316. Prato, C.A., M.A. Ceballos, P.J.F. Huerta, and C.F. Ger- baudo, “Application of Ambient Vibration Measurements for Repair of the Chaco–Corrientes Cable-Stayed Bridge in Argentina,” Proceedings of the International Seminar, Workshop and Exhibition/The Repair and Rehabilitation of Reinforced Concrete Structures; The State of the Art, 1998, pp. 177–191. Recommendations for Stay Cable Design, Testing, and Instal- lation, 4th ed., Post-Tensioning Institute, Pheonix, Ariz., 2001, 101 pp. Reinholdt, P., E. Veje, and J. Kalvslund, “Rehabilitation of the Luangwa Bridge,” Proceedings of the IABSE Confer- ence, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999.

Rizzo, P. and F. Lanza di Scalea, “Wave Propagation in Multi- wire Strands by Wavelet-Based Laser Ultrasound,” Exper- imental Mechanics, Vol. 44, No. 3, 2004. Roos, F. and J.F. Noisternig, “CFRP-Tendons—Develop- ment and Testing,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 623–630. Saito, T., M. Matsumoto, and M. Kitazawa, “Rain–Wind Exci- tation of Cables on Cable-Stayed Higashi–Kobe Bridge and Cable Vibration Control,” Proceedings of Conference on Cable-Stayed and Suspension Bridges, Deauville, France, Oct. 1994, pp. 507–514. Sarcos-Portillo, A., A. Navarro-Cerpa, and H. Garcia-Legl, “Inspection and Process of Tension of Cables of General Rafael Urdaneta Bridge,” Journal of Bridge Engineering, Vol. 8, No. 4, July 2003, pp. 223–228. Sarkar, P.P., S. Phelan, K.C. Mehta, T.B. Gardner, and Z. Zhao, “Cable Stay Aerodynamic Damper Band and Method of Use,” USPTO Patent No. 6,386,526, May 14, 2002. Saul, R. and H.S. Svensson, “On the Corrosion Protection of Stay Cables,” Wire Rope News and Sling Technology, Aug. 1991, pp. 14–29. Seible, F. and R. Burgueno, “Advanced Composites in Pedes- trian Bridge Design,” Proceedings of the ASCE Structures Congress XV, Vol. 1, Portland, Ore., April 13–16, 1997, pp. 378–382. Stafford, D.G. and S.C. Watson, “A Discussion of Some Crit- ical Corrosion Problems in the Cable Elements of Stayed Girder Structures,” Proceedings of the US–European Work- shop on Bridge Evaluation, Repair, and Rehabilitation, St. Remy-les-Chevreuse, June 1987, pp. 622–637. Starossek, U., “Cable-Dynamics, A Review,” Structural Engineering International, No. 3, 1994, pp. 171–176. Stubler, J., P. Ladret, and J.B. Domage, “Vibration Control of Stay Cables,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 606–612. Suzuki, N., H. Takamatsu, S. Kawashima, K. Sugii, and M. Iwasaki, “Ultrasonic Detection Method for Wire Breakage,” Kobelco Technology Review, No. 4, Aug. 1988, pp. 23–26. Suzumura, K. and S.-I. Nakamura, “Environmental Factors Affecting Corrosion of Galvanized Steel Wires,” Journal of Materials in Civil Engineering, Vol. 16, No. 1, Feb. 2004, pp. 1–7. Swan, R., “Vibrations Damped,” Bridge Design & Engi- neering, Nov. 1997, Vol. 3, No. 9. Tabatabai, H., A.T. Ciolko, and T.J. Dickson, “Implica- tions of Test Results from Full-Scale Fatigue Tests of Stay Cables Composed of Seven-Wire Prestressing Strands,” Proceedings of the Fourth International Bridge Engineering Conference, Vol. 1, Aug. 28–30, 1995, pp. 266–277. Tabatabai, H. and A.B. Mehrabi, “Bridge Stay Cable Con- dition Assessment Using Vibration Measurement Tech- niques,” Proceedings of SPIE Structural Materials Tech- 66 nology III, an NDT Conference, Vol. 3400, Mar.–Apr. 1998, San Antonio, Tex., pp. 194–204. Tabatabai, H., A. Mehrabi, and A.G. Davis, “Field Testing of Stay Cables for the Cochrane Bridge in Mobile, Alabama,” Report submitted to A.G. Lichtenstein, Inc., Paramus, N.J., Construction Technology Laboratories, Inc., Skokie, Ill., 1998. Tabatabai, H. and A. Mehrabi, “Vibration Suppression Mea- sures for Stay Cables,” Proceedings of the 17th Inter- national Modal Analysis Conference, Kissimmee, Fla., Feb. 1999, pp. 1237–1243. Tabatabai, H. and A. Mehrabi, “Evaluation of Various Damping Treatments for Stay Cables,” Proceedings of the 18th International Modal Analysis Conference, San Antonio, Tex., Feb. 2000. Tabatabai, H. and A.B. Mehrabi, “Design of Mechanical Vis- cous Dampers for Stay Cables,” Journal of Bridge Engi- neering, Vol. 5, No. 2, May 2000, pp. 114–123. Tabatabai, H. and A.B. Mehrabi, “TMD-Damped Stay Cable and Method and TMD,” USPTO Patent No. 6,292,967 B1, Sep. 25, 2001. Tarui, T., N. Maruyama, T. Eguchi, and S. Konno, “Development of High Strength Galvanized Steel Wire for Bridge Cable,” Proceedings of the IABSE Conference, Cable-Supported Bridges, Challenging Technical Limits, Seoul, Korea, 2001. Telang, N.M., C.M. Minervino, and P.G. Norton, “Retrofit of Aerodynamic Cable Instability on a Cable-Stayed Bridge: Case Study,” Transportation Research Record 1740, Trans- portation Research Board, National Research Council, Washington, D.C., 2000, pp. 61–67. Telang, N.M., C.A. Ligozio, and A.B. Mehrabi, “Luling Bridge—Phase II Structural Evaluation of Luling Bridge Stay Cable Array—Tasks 1, 2, and 3,” Report to the Louisiana Department of Transportation and Develop- ment, State Project No. 700-45-0107, Construction Tech- nology Laboratories, Skokie, Ill., July 2004. Walther, R., et al. Cable Stayed Bridges, 2nd ed., Thomas Telford, London, 1999, 320 pp. Walton, J.M., “Developments in Steel Cables,” Journal of Constructional Steel Research, Vol. 39, No. 1, 1996, pp. 3–29. Watson, S.C. and D. Stafford, “Cables in Trouble,” Civil Engineering, Vol. 58, No. 4, Apr. 1988, pp. 38–41. Weischedel, H.R. and H.-W. Hohle, “Quantitative Non- Destructive In-Service Evaluation of Stay Cables of Cable- Stayed Bridges: Methods and Practical Experience,” SPIE, Vol. 2456, May 1995, pp. 226–236. Wichmann, H.J., A. Holst, and H. Budelmann, “Detection and Localization of Fractures in Tendons by Means of Electromagnetic Resonance Measurement,” 2003 [On- line]. Available: http://www.ndt.net/article/ndtce03/papers/ v104/v104.htm. Wu, Q., K. Takahashi, T. Okabayashi, and S. Nakamura, “Response Characteristics of Local Vibrations in Stay Cables on an Existing Cable-Stayed Bridge,” Journal of Sound and Vibration, Vol. 261, No. 3, Mar. 27, 2003, pp. 403–420.

67 Yamagiwa, I., H. Utsuno, K. Endo, and K. Sugii, “Applica- tion of Simultaneous Identification of Tension and Flex- ural Rigidity at Once to the Bridge Cables,” Proceedings of the IABSE Conference, Cable-Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999. Yamaguchi, K., Y. Manabe, N. Sasaki, and K. Morishita, “Field Observation and Vibration Test of the Tatara Bridge,” Proceedings of the IABSE Conference, Cable- Stayed Bridges, Past, Present, and Future, Malmo, Sweden, June 1999, pp. 707–714. Yoneda, M. and K. Maeda, “A Study on Practical Estima- tion Method for Structural Damping of Stay Cable with Damper,” Proceedings of the Canada–Japan Workshop on Bridge Aerodynamics, Ottawa, Canada, Sep. 1989, pp. 119–128. Xu, Y.L., S. Zhan, and J.M. Ko, “Experimental Study of Vibration Mitigation of Bridge Stay Cables,” Journal of Structural Engineering, Vol. 125, No. 9, Sep. 1999, pp. 977–986. Zoli, T. and R. McCabe, “Cable-Stayed Bridge Design,” Pre- sented at the High Performance Stay Cable Systems Sem- inar, sponsored by Freyssinet International, Washington, D.C., Oct. 1, 2004.

Next: Appendix A - Survey Questionnaire »
Inspection and Maintenance of Bridge Stay Cable Systems Get This Book
×
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

TRB’s National Cooperative Highway Research Program (NCHRP) Synthesis 353: Inspection and Maintenance of Bridge Stay Cable Systems identifies and explains various inspection and maintenance techniques for bridge stay cable systems. It discusses both short- and long-term approaches. The report information on methods for inspections and assessments, including nondestructive testing and evaluation procedures; repair and retrofit; methods for control of cable vibrations, including rain–wind vibrations; stay cable fatigue and failure; effectiveness of various inspection and repair methods; limitations of available technologies; and trends and recommendations for future study.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!