Load and Resistance Factor Design (LRFD) for Deep Foundations (2004)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

73 BIBLIOGRAPHY* AASHTO. 1994. LRFD Bridge and Construction Specifications. AASHTO, Washington, DC. AASHTO. 1996/2000. LRFD Bridge Design Specifications: 2nd LRFD Edition—2000 Interim Revisions. AASHTO, Washing- ton, DC. AASHTO. 1997. Standard Specifications for Highway Bridges: 16th Edition (1996 with 1997 interims). AASHTO, Washington, DC. AASHTO. 2001. LRFD Bridge Design Specifications. AASHTO, Washington, DC. American Concrete Institute (ACI). 1995, Building Code Require- ments for Reinforced Concrete. American Concrete Institute, Detroit, MI. American Institute of Steel Construction (AISC). 1994. Load and Resistance Factor Design. Manual of Steel Construction, Amer- ican Institute of Steel Construction, Chicago, IL. American Petroleum Institute (API). 1989. Draft Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms—Load and Resistance Factor Design. API RP2A- LRFD. American Petroleum Institute, Dallas, TX. ASCE. 1993. Minimum Design Loads for Buildings and Other Struc- tures ASCE 7-93. (Formerly ANSI A58.1). ASCE, Reston, VA. AUSTROADS. 1992. AUSTROADS Bridge Design Code. National Office, AUSTROADS, Surry Hills, NSW, Australia. Ayyub, B.M. 1999. Cost-Benefit Analysis of Risk-Informed Design of Structural Systems. American Society of Mechanical Engineers, the Research Committee on Risk Technology, Washington, DC. Ayyub, B., and Assakkaf, I. 1999. LRFD Rules for Naval Surface Ship Structures: Reliability-Based Load and Resistance Factor Design Rules. Naval Surface Warfare Center, Carderock Divi- sion, U.S. Navy. Ayyub, B., Assakkaf, I., and Atua, K. 1998a. Development of LRFD Rules for Naval Surface Ship Structures: Reliability-Based Load and Resistance Factor Design Rules, Part III—Stiffened and Gross Panels. Naval Surface Warfare Center, Carderock Divi- sion, U.S. Navy. Ayyub, B., Assakkaf, I., and Atua, K. 2000. Reliability-Based Load and Resistance Factor Design (LRFD) of Hull Girders for Surface Ships. Naval Engineers Journal, Vol. 112, No. 4, July 2000, pp. 279–296. Ayyub, B., Assakkaf, I., Atua, K., Engle, A., Hess, P., Karaszewski, Z., Kihl, D., Melton, W., Sielski, R., Sieve, M., Waldman, J., and White, G. 1998b. Reliability-based Design of Ship Structures: Current Practice and Emerging Technologies. T&R Report R-53, Society of Naval Architects and Marine Engineers. Ayyub, B., and McCuen, R. 1997. Probability, Statistics and Reli- ability for Engineers. CRC Press, FL. Baecher, G. 2001. Contribution to a progress research report as part of Project NCHRP 24-17, LRFD Deep Foundations Design, unpublished document. Barker, R., Duncan, J., Rojiani, K., Ooi, P., Tan, C., and Kim, S. 1991. NCHRP Report 343: Manuals for the Design of Bridge Foundations. TRB, National Research Council, Washington, DC. Becker, D. 1996. Eighteenth Canadian Geotechnical Colloquium: Limit States Design for Foundations. Part I. An overview of the foundation design process. Canadian Geotechnical Journal, Vol. 33, No. 6, December, pp. 956–983. Benjamin, J. R., and Cornell, C. A. 1970, Probability, Statistics, and Decision for Civil Engineers. McGraw-Hill, New York. Bermingham, P., and White, J. 1995. Pyrotechnics and the Accurate Prediction of Statnamic Peak Loading and Fuel Charge Size. Proceedings First International Statnamic Seminar, September 27–30, Vancouver, BC, Canada, pp. 1–12. Bowles, J. 1996. Foundation Analysis and Design. McGraw-Hill, New York. Brooms, B. 1964a. “Lateral Resistance of Piles in Cohesive Soils.” Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. SM2, March, pp. 27–63. Brooms, B. 1964b. “Lateral Resistance of Piles in Cohesionless Soils.” Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. SM3, May, pp.123–156. Butler, H.D., and Hoy, H.E. 1977. Users Manual for the Texas Quick-Load Method for Foundation Load Testing. FHWA-IP- 77-8. FHWA, Office of Development, Washington, DC. Canadian Geotechnical Society. 1992. Canadian Foundation Engi- neering Manual, 3rd Edition. Bi-Tech Publishers, Ltd., Rich- mond, British Columbia, Canada. Carter, J. P., and Kulhawy, F. H. 1988. Analysis and Design of Foundations Socketed into Rock. Electric Power Research Insti- tute, Report Number EPRI EL-5918. Construction Industry Research and Information Association (CIRIA). 1977. Rationalization of Safety and Serviceability Fac- tors in Structural Codes: CIRIA Report 63. Construction Indus- try Research and Information Association, SWIP 3AU, Report 63, London, England. Chellis, R.D. 1961. Pile Foundation, 2nd ed. McGraw Hill, NY. Davisson, M. 1972. High Capacity Piles. In Proceedings, Soil Mechanics Lecture Series on Innovations in Foundation Con- struction, ASCE, Illinois Section, Chicago, IL, pp. 81–112. DeBeer, E. 1970. Proefondervindellijke bijdrage tot de studie van het grandsdraagvermogen van zand onder funderinger op staal. English version. Geotechnique, Vol. 20, No. 4, pp. 387–411. DiMaggio, J., Saad, T., Allen, T., Passe, P., Goble, G., Christopher, B., DiMillio, A., Person, G., and Shike, T. 1998. FHWA Summary Report of the Geotechnical Engineering Study Tour (GEST). FHWA International Technology Scanning Program, Decem- ber, FHWA. DiMillio, A. 1999. A Quarter Century of Geotechnical Research. FHWA-RD-98-139, FHWA. Ellingwood, B., Galambos, T., MacGregor, J., and Cornell C. 1980. Development of a Probability-Based Load Criterion for Ameri- can National A58. National Bureau of Standards Publication 577. Washington, DC. Ellingwood, B., Galambos, T. 1982. Probability-Based Criteria for Structural Design. Structural Safety, Vol.1, pp. 15–26. Ellingwood, B., Galambos, T., MacGregor, J., and Cornell, C. 1982a. Probability Based Load Criteria—Assessment of Current Design Practices. Journal of the Structural Division, ASCE, Vol. 108, No. ST5, pp. 959–977. Ellingwood, B., Galambos, T., MacGregor, J., and Cornell, C. 1982b. Probability Based Load Criteria—Load Factors and Load*Bibliographic material not verified by TRB.

Combinations. Journal of the Structural Division, ASCE, Vol. 108, ST5, pp. 978–997. Esrig, M. I., and Kirby, R. C. 1979. Soil Capacity for Supporting Deep Foundation Members in Clay. ASTM STP. No. 670, pp. 27–63. Eurocode 7. 1997. Geotechnical Design—Part I: General Rules. Euro- pean Committee for Standardization, Central Secretariat, Brussels. FHWA. 1988. Geotechnical Guideline No. 13. FHWA, 37 pp. Fragaszy, R., Higgins, J., and Lawton, E. 1985. Development of Guidelines for Construction Control of Pile Driving and Estima- tion of Pile Capacity: Phase I. Washington DOT Report WA/ RD-68.1, Olympia, Washington, 83 pp. Freudenthal, A. 1947. Safety of Structures. Transactions of the ASCE. Vol. 112, pp. 125–180. Galambos, T., and Ravindra, M. 1978. Properties of Steel for Use in LRFD. Journal of Structural Engineering, Vol. 104, No. 9, pp. 1459–1468. Gates, M., 1957. Empirical Formula for Predicting Pile Bearing Capacity. Civil Engineering, Vol. 27, No. 3, pp. 65–66. Geosciences Testing and Research, Inc. 1997. Dynamic Pile Testing Report, Central Artery/Tunnel Project C07D2, I-90/Airport Inter- change Arrivals Tunnel—Phase I, East Boston, Massachusetts. Geosciences Testing and Research, Inc. North Chelmsford, MA. Geosciences Testing and Research, Inc. (GTR). 1998. Dynamic Pile Testing Report, Central Artery/Tunnel Project C07D2, I-90/ Airport Interchange Toll Plaza, East Boston, Massachusetts. Geosciences Testing and Research, Inc., North Chelmsford, MA. Goble, G. 1999. NCHRP Synthesis of Highway Practice 276: Geo- technical Related Development and Implementation of Load and Resistance Factor Design (LRFD) Methods. TRB, National Research Council, Washington, DC. Goble, G., Likens, G., and Rausche, F. 1970. Dynamic Studies on the Bearing Capacity of Piles—Phase III. Report No. 48. Divi- sion of Solid Mechanics, Structures, and Mechanical Design. Case Western Reserve University. Goble, G., and Rausche, F. 1976. Wave Equation Analysis of Pile Driving-WEAP Program. Vol. 1–4. FHWA #IP-76-14.1 through #IP-76-14.4. GRL, Inc. 1999. Pile-Driving Analyzer, PAK Users Manual. Goble, Rausche, Likins and Associates, Inc. Grant, E., and Leavenworth, R. 1996. Statistical quality control. 7th ed., McGraw-Hill, New York, NY, 1996. pp. 764. Hajduk, E., Paikowsky, S., Hölscher, P., and Barends, F. 2000. Accel- erations of a Driven Pile and the Surrounding Soil. Proceedings of the 6th International Conference on the Applications of Stress- Wave Theory to Piles, S. Niyama, and J. Beim eds., September 11–13, São Paulo, Brazil, Balkema, Rotterdam-the Netherlands, pp. 541–548. Hamilton, J., and Murff, J. 1992. Selection of LRFD Resistance Factors for Pile Foundation Design. American Society of Civil Engineers Structures Congress, April 13–15, San Antonio, Texas, Proceedings Structures Congress ’92, ASCE. Hannigan, P., Goble, G., Thendean, G., Likins, G., and Rausche, F. 1995. Design and Construction of Driven Pile Foundation. FHWA, Washington, DC. Hannigan, R., Goble, G., Thendean, G., Likins, G., and Rausche, F. 1996. Design and Construction of Driven Piles Foundations— Volume II (Working Draft). U.S. DOT, FHWA. Washington, DC. Hansen, B. 1953. Earth Pressure Calculation. Danish Technical Press, Copenhagen, Denmark. Hansen, B. 1956. Limit Design and Safety Factors in Soil Mechan- ics. Bulletin No. 1, Danish Geotechnical Institute, Copenhagen, Denmark. 74 Hansen, B. 1966. Code of Practice for Foundation Engineering. Bulletin No. 22, Danish Geotechnical Institute, Copenhagen, Denmark. Hasofer, A. M., and Lind, N. C. 1974. An Exact and Invariant First- Order Reliability Format. Journal of Engineering Mechanics, Vol. 100. No. EM1, pp. 111–121. Hölscher, P. 1995. Dynamical Response of Saturated and Dry Soils. Delft University Press, Delft, The Netherlands. Hölscher, P., and Barends, F. 1996. In-situ Measurement of Soil- Motion near the Toe of a Dynamically Loaded Pile. In Proceed- ings, 5th International Conference of the Application of Stress- Wave Theory to Piles, September 11–13, 1996 Orlando, FL (F.C. Townsend, M. Hussein, and M. McVay, eds.), pp. 26–36. Japanese Geotechnical Society. 1998. Foundation Design Stan- dards in the World—Toward Performed-Based Design. Research Committee on Present & Future of Japanese Foundation Design and Soil Investigation in View of International Equivalency. Kulhawy, F., and Phoon, K. 1996. Engineering Judgment in the evolution from Deterministic to Reliability-Based Foundation Design. Proceedings of the 1996 Conference on Uncertainty in the Geologic Environment, UNCERTAINTY’96. Part 1 (of 2), July 31–Aug. 31, Madison, WI, ASCE, NY, pp. 29–48. Kulhawy, F., and Mayne, P. 1990. Manual on Estimating of Soil Properties for Foundation Design. Electric Power Research Insti- tute, Palo Alto, CA. Kuo, C., McVay, M., and Birgisson, M. 2002. Calibration of Load and Resistance Factor Design: Resistance Factors for Drilled Shaft Design, TRB, Transportation Research Record, No. 1808, pp.108–111, Annual Meeting, January 13–17, Washington, DC. Lai, P., and Graham, K. 1995. Static Pile Bearing Analysis Program. SPT94. http://www.dot.state.fl.us/structures/manuals/spt94.zip Long, J.; Bozkurt, D.; Kerrigan, J.; Wysockey, M. 1999. Value of Methods for Predicting Axial Pile Capacity. TRB Transportation Research Record No. 1663, pp. 57–63, 76th Annual Meeting, January, Washington, DC. Madsen, H.O., Krenk, S. and Lind, N.C. 1986. Methods of Struc- tural Safety. Prentice Hall, Englewood Cliffs, NJ. Mansour, A.E., Wirsching, P.H., Ayyub, B.M., and White, G.J. 1994. Probability Based Ship Design Implementation of Design Guidelines for Ships, Ship Structures Committee Draft Report. U.S. Coast Guard, Washington, DC. Massachusetts. Code of Massachusetts Regulations (CMR). State Building Code—780, 1997. Article 12, section 1214.3.1, Driving Formula, CMR 5th edition. Massachusetts Highway Department. 1988. Standard Specifications for Highways and Bridges. Massachusetts Highway Department. McVay, M., Birgisson, B., Nguyen, T., and Kuo, C. 2002. Uncer- tainty in LRFD phi, φ, Factors for Driven Prestressed Concrete Piles, TRB, Transportation Research Record 1808, pp. 99–107, Annual Meeting, January 13–17, Washington, DC. McVay, M., Birgisson, B., Zhang, L., Perez., A, and Putcha, S. 2000. Load and Resistance Factor Design (LRFD) for Driven Piles Using Dynamic Methods—A Florida Perspective. Geo- technical Testing Journal, Vol. 23, No. 1, pp. 55–66. McVay, M., and Townsend, F. 1989. Short Course/Workshop Guide for PC Software Support for Design and Analysis of Deep and Shallow Foundations from In-situ Tests (or PL-AID Man- ual). University of Florida, Gainesville, Florida. Melchers, R. E. 1987. Structural Reliability Analysis and Predic- tion. Ellis Horwood Limited, UK.

Meyerhof, G. 1970. Safety Factors in Soil Mechanics. Canadian Geotechnical Journal, Vol. 7, No. 4, pp. 349–355. Meyerhof, G. 1976. Bearing Capacity And Settlement Of Pile Foundations. American Society of Civil Engineers, Journal of the Geotechnical Engineering Division, Vol. 102, No. 3, March, pp. 195–228. Meyerhof, G. 1994. Evolution of Safety Factors and Geotechnical Limit State Design. Second Spencer J. Buchanan Lecture, Texas A and M University, Nov. 4, pp. 32. Middendorp, P., and Bielefeld, M. 1995. Statnamic Load Testing and the Influence of Stress Wave Phenomena. Proceedings of the First International Statnamic Seminar, Vancouver, BC, Canada, September 27–30, pp. 207–220. Middendorp, P., and van Weel, P. 1986. Application of Character- istic Stress-Wave Method in Offshore Practice. Proceedings of Numerical Methods in Offshore Piling: 3rd International Con- ference, Nantes, May 21–22, Editions Technip. Moses, F. 1985. Implementation of a Reliability-Based API RP2A Format, Final Report. API PRAC 83-22. American Petroleum Institute, Dallas, TX. Moses, F. 1986. Development of Preliminary Load and Resistance Factor Design Document for Fixed Offshore Platforms, Final Report. API-PRAC 95-22, American Petroleum Institute, Dal- las, TX. Moses, F., and Verma, D. 1987. NCHRP Report 301: Load Capac- ity Evaluation of Existing Bridges. TRB, Washington, DC. National Research Council. 1995. Probabilistic Methods in Geo- technical Engineering. National Academies Press, Washington, DC, pp. 96. National Research Council of Canada. 1977. National Building Code of Canada. Ottawa, Canada. Nordic Committee on Building Regulations. 1978. Recommenda- tions for Loading and Safety Regulations for Structural Design. Nordic Committee for Safety of Structures, NKB Report No. 36. Copenhagen, Denmark. Nordlund, R. L. 1963. Bearing Capacity of Piles in Cohesionless Soils. Journal of Soil Mechanics and Foundation Engineering, JSMFE, Vol. 89, SM 3, pp 1–36. Nottingham, L., and Schmertmann, J. 1975. An Investigation of Pile Capacity Design Procedures. Final Report D629 to Florida Department of Transportation, Department of Civil Engineering, University of Florida, pp 159. Nowak, A. 1999. NCHRP Report 368: Calibration of LRFD Bridge Design Code. TRB, Washington, DC. Olsen, R., and Flaate, K. 1967. Pile Driving Formulas for Friction Piles in Sand. Journal of Soil Mechanics and Foundation Engi- neering, JSMFE, Vol. 93, SM6, Nov. 1967, 279–297. O’Neill, M. 1995. LRFD Factors for Deep Foundations through Direct Experimentation. In Proceedings of US/Taiwan Geotech- nical Engineering Collaboration Workshop. Sponsored by the National Science Foundation (USA) and the National Science Council (Taiwan, ROC), A.B. Huang, Y.S. Fang, P.W. Mayne, and S.G. Paikowsky eds., Taipei, January 9–11, pp. 100–114. O’Neill, M., and Reese, L. 1999. Drilled Shafts: Construction Pro- cedures and Design Methods, Volume II Chapters 9–19, Appen- dices. U.S. DOT, FHWA, Washington, DC. O’Neill, M., Townsend, F., Hassan, K., Buller, A., and Chang, P. 1996. Load Transfer for Drilled Shafts in Intermediate Geoma- terials, FHWA-RD-95-172, FHWA. Ontario Ministry of Transportation and Communication. 1992. Ontario Highway Bridge Design Code and Commentary. 3rd ed. 75 Orr, T. 2002. Eurocode 7— A Code for Harmonized Geotechnical Design. Proceedings of the International Workshop on Founda- tion Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design, IWS Kamakura 2002, Tokyo, Japan, April 10–12, Y. Honjo, O. Kusakabe, K. Matsui, M. Kouda, and G. Pokharel eds., Balkema, the Nether- lands, pp. 3–15. Orr, T., and Farrell, E. 1999. Geotechnical Design to Eurocode 7. Springer-Verlag, UK, pp. 175 Osterberg, J. 1992. The Osterberg Cell for Load Testing Drilled Shafts And Driven Piles. FHWA Report SA-94-035, Washing- ton, DC. Paikowsky, S. 1982. Use of Dynamic Measurements to Predict Pile Capacity Under Local Conditions. M.Sc. Thesis, Dept. of Civil Engineering Technion-Israel Institute of Technology, Haifa, Israel. Paikowsky, S. 1984. Use of Dynamic Measurements for Pile Analy- sis. Including PDAP-Pile-Driving Analysis Program. GZA Inc., Newton, Massachusetts. Paikowsky, S. 1995. Using Dynamic Measurements for the Capac- ity Evaluation of Driven Piles. Civil Engineering Practice, Jour- nal of the Boston Society of Civil Engineers Section/ASCE. Vol. 10, No. 2, pp. 61–76. Paikowsky, S., and Chernauskas, L. 1992. Energy Approach for Capacity Evaluation of Driven Piles. Proceedings of the 4th International Conference on the Application of Stress-Wave The- ory to Piles, F.B. Barends ed., September 21–24, The Hague, The Netherlands, pp. 595–601. Paikowsky, S., and Chernauskas, L. 1996. Soil Inertia and the Use of Pseudo Viscous Damping Parameters. Proceedings of the 5th International Conference on the Application of Stress-Wave The- ory to Piles, F.C. Townsend, M. Hussein, and M.C. McVay eds., September 11–13, Orlando, FL, pp. 203–216. Paikowsky, S., and Hajduk, E. 1999. Design and Construction of an Instrumented Test Pile Cluster: Research Report submitted to the Massachusetts Highway Department, September, 1999. Univer- sity of Massachusetts—Lowell, MA. Paikowsky, S., and Hajduk, E. 2000. Theoretical Evaluation and Full Scale Field Testing Examination of Pile Capacity Gain with Time: Research Report submitted to the Massachusetts Highway Depart- ment, December, University of Massachusetts—Lowell, MA. Paikowsky, S., and Hart, L. 2000. Development and Field Testing of Multiple Deployment Model Pile (MDMP): Research Report to be submitted to the Federal Highway Administration, April, 2000. FHWA-RD-99-194. FHWA. Paikowsky, S., and LaBelle, V. 1994. Examination of the Energy Approach for Capacity Evaluation of Driven Piles. Proceedings of the International Conference on Design and Construction of Deep Foundations, December 6–8, Orlando, FL. FHWA, Vol. II, pp. 1133–1149. Paikowsky, S., LaBelle, V., and Hourani, N. 1996. Dynamic Analy- ses and Time Dependent Pile Capacity. Proceedings of the 5th International Conference on the Application of Stress-Wave The- ory to Piles, F.C. Townsend, M. Hussein, and M.C. McVay eds., September 11–13, Orlando, FL, pp. 325–339. Paikowsky, S., LaBelle, V., and Mynampaty, R. 1995. Static and Dynamic Time Dependent Pile Behavior: Research Report sub- mitted to the Massachusetts Highway Department, November, University of Massachusetts—Lowell, MA. Paikowsky, S., Operstein, V., and Bachand, M. 1999. Express Method of Pile Testing by Static Cyclic Loading. Research Report submitted to the Massachusetts Highway Department, October, University of Massachusetts—Lowell, MA.

Paikowsky, S., Regan, J., and McDonnell, J. 1994. A Simplified Field Method for Capacity Evaluation of Driven Piles. FHWA- RD-94-042, FHWA. Paikowsky, S., and Stenersen, K. 2000. The Performance of the Dynamic Methods, their Controlling Parameters and Deep Foun- dation Specifications. Keynote lecture in Stress Wave 2000, Pro- ceedings of the Sixth International Conference on the Application of Stress-Wave Theory to Piles, S. Niyama, and J. Beim eds., Sep- tember 12, São Paulo, Brazil, Balkema, Rotterdam—the Nether- lands, pp. 281–304. Paikowsky, S., and Whitman, R. 1990. The Effect of Plugging on Pile Performance and Design. Canadian Geotechnical Journal, Vol. 27, No. 4, pp. 429–440. Paikowsky, S., Whitman, R., and Baligh, M. 1989. A New Look at the Phenomenon of Offshore Pile Plugging. Marine Geotechnol- ogy, Vol. 8, No. 3, pp. 213–230. Payer, H., Huppmann, H., Jochum, C., Madsen, H., Nittinger, K., Shibata, H., Wild, W., and Wingender, H. 1994. Plenary Panel Discussion on How Safe is Safe Enough? Proceedings of the 6th International Conference on Structural Safety and Reliability, G.I. Schueller, M. Shinozuka and J.T.P. Yao eds., ICOSSAR ‘93, Innsbruck, August 9–13, Balkema, Rotterdam, The Netherlands, pp. 57–74. Phoon, K.K., and Kulhawy, F.H. 1996. On Quantifying Inherent Soil Variability. Uncertainty in the Geologic Environment: from Theory to Practice Proceedings of Uncertainty ’96, C.D. Shack- elford, P.P. Nelson, and M.J.S. Roth eds., Madison, WI, July 31–August 3, ASCE, New York, pp. 326–340. Phoon, K., Kulhawy, F. and Grigoriu, M. 1995. Reliability-Based Design of Foundations for Transmission Line Structures. Report TR-105000. Electrical Power Research Institute (EPRI), Palo Alto, Texas. Rausche, F. 2000. Personal communication. February 2000. Rausche, F., Goble, G., and Likens, G. 1975. Bearing Capacity of Piles from Dynamic Measurements, Final Report. Ohio DOT-05- 75. Ohio Department of Transportation. Rausche, F., Thendean, F., Abou-matar, H., Likins, G., and Goble, G. 1997. Determination of Pile Driveability and Capacity from Pene- tration Tests. Vol. 1–3, Final Report. FHWA-RD-96-179, FHWA. Reese, L. C., and O’Neill M. W. 1988. Drilled Shaft: Construction Procedures and Design Methods. FHWA-HI-88-042, FHWA. Reese, L.C., Wang, S.C., and Arrellaga, J. 1998. APILE Plus 3.0 Manual. EnSoft, Inc. Austin, TX. Reese, L. C., and Wright S. J. 1977. Construction Procedures and Design for Axial Loading, Drilled Shaft Manual HDV-22. Rosenblueth, E., and Esteva, L. 1972. Reliability Basis for Some Mexican Codes. ACI Publication SP-31. American Concrete Insti- tute, Detroit, MI. Siu, W., Parimi, S., and Lind, N. 1975. Practical Approach to Code Calibration. Journal of the Structural Division, Vol. 101, No. ST7, pp. 1469–1480. Smith, E. 1960. Pile Driving Analysis by the Wave Equation. Jour- nal of Soil Mechanics and Foundations, ASCE, Vol. 86, No. SM4, August 1960, pp. 35–61. Standards Association of Australia. 1995. Australian Standards, Piling-Design and Installation. Standards Association of Aus- tralia, Homebush, NSW, Australia. Tang, W. 1993. Recent Developments in Geotechnical Reliability. Proceedings of the Conference on Probabilistic Methods in Geo- technical Engineering Li, K., and Lo, S-C. eds., Canberra, Aus- 76 tralia, February 10–12, Balkema, Rotterdam, The Netherlands, pp. 3–28. Tang Q., Drumm, E.C., and Bennett, R.M. 1994. Response to Drilled Shaft Foundations in Karst During Construction Loading, Proceedings of the International Conference on Design and Con- struction of Deep Foundations, December 6–8, Orlando, FL, FHWA, Vol. III, pp. 1296–1309. Tang, W., Woodford, D., and Pelletier, J. 1990. Performance Reli- ability of Offshore Piles. Proceedings of the 22nd Annual Off- shore Technology Conference. May 7–10, Houston, TX, Paper No. OTC 6379, Offshore Technology Conference, Richardson, TX, Vol. 3, p. 299–308. Terzaghi, K. 1942. Discussion of the Progress Report of the Com- mittee on the Bearing Value of Pile Foundations. Proceedings, ASCE. Vol. 68, pp. 311–323. Terzaghi, K., and Peck, R.B. 1967. Soil Mechanics in Engineering Practice. Wiley. Thoft-Christensen, P., and Baker, M. 1982. Structural Reliability Theory and Its Application. Springer-Verlag, New York. Tomlinson, M.J., 1986. Foundation Design and Construction. Longman Scientific and Technical, Essex, England. Tomlinson, M.J. 1995. Foundation Design and Construction. 6th Edition. Longman Scientific and Technical, Essex, England. Trautmann, C., and Kulhawy, F. 1996. “Estimation of In-situ Test Uncertainty.” Uncertainty in Geological Environment: From Theory to Practice, pp. 269–86. U.S. Army Corps of Engineers. 1992. Bearing Capacity of Soil, Technical Engineering and Design Guides. Adapted by ASCE— 2000, No.7, EM 1110-1-1905. ASCE Press, New York. Vijayvergiya, V.N., and Focht Jr., J.A. 1972. A New Way to Pre- dict Capacity of Piles In Clay. Proceedings of the 4th Annual Off- shore Technology Conference, Houston, TX, Offshore Technol- ogy Conference, Richardson, TX, Vol. 2, pp. 856–874. Wellington, A. 1892. Discussion of “The Iron Wharf at Fort Mon- roe, Va. By J.B. Cuncklee.” Transactions, ASCE Vol. 27, paper No. 543, Aug. 1892, pp. 129–137. Whitman, R. 1984. Evaluating Calculated Risk in Geotechnical Engineering. The Seventeenth Terzaghi Lecture. Journal of Geo- technical Engineering, Vol. 110, No. 2, pp. 145–188. Wirsching, P. H. 1984. Fatigue Reliability for Offshore Struc- tures. Journal of Structural Engineering, Vol. 110, No. 10, pp 2340–56. Withiam, J., Voytko, E., Barker, R., Duncan, M., Kelly, B., Musser, S., and Elias, V. 1998. Load and Resistance Factor Design (LRFD) of Highway Bridge Substructures. FHWA HI-98-032. FHWA. Wu, T., Tang, W., Sangrey, D., and Baecher, G., 1989. Reliability of Offshore Foundations—State of the Art. Journal of Geotech- nical Engineering, Vol. 115, No. 2, pp. 157–178. Zeitlen, J.G., and Paikowsky, S.G. Nov. 1982. “New Design Cor- relations for Piles in Sand.” Discussion in ASCE Journal of GE, 108, No. GT11, pp. 1515–1518. Zhang, L., Silva-Tulla, F., and Grismala, R. 2002. Ultimate Resis- tance of Laterally Loaded Piles in Cohesionless Soils, Proceed- ings of the International Deep Foundations Congress 2002: An International Perspective on Theory, Design, Construction, and Performance. February 14–16, 2002 Orlando, Florida, Geotech- nical Special Publication No. 116, ASCE, pp.1364–1375. Zhang, L., Tang, W., and Ng, C. 2001. Reliability of Axially Loaded Driven Pile Groups. Journal of Geotechnical and Geoenviron- mental Engineering, Vol. 127, No. 12, pp. 1051–1060.