Click for next page ( 43

The National Academies of Sciences, Engineering, and Medicine
500 Fifth St. N.W. | Washington, D.C. 20001

Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement

Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 42
43 REFERENCES 1. Cunningham, T. "Quality Control of Thermal Spray Coating 18. Rogers, F. S., and W. Gajcak. "Cost and Effectiveness of TSC for Effective Long Term Performance." Journal of Protective Zinc, Zinc/Aluminum and Aluminum Using High Deposition Coatings and Linings, Vol. 13, No. 1, p. 49. Low Energy Arc Spray Machines." Presented at SSPC Interna- 2. Fitzsimons, B. "Thermal Spray Metal Coatings for Corrosion tional Conference, San Diego, 1997. Protection." Corrosion Management, December 1995/January 19. Sampson, E. R., and P. Sahoo. "New Arc Wire Approvals for 1996, pp. 3541. Aircraft Power Plant Overhaul." Presented at the International 3. Fischer, K. P., W. H. Thomason, and J. E. Finnegan. "Electro- Thermal Spray Conference, Montreal, 2000. chemical Performance of Flame Sprayed Aluminum Coatings 20. Cunningham, T. "Quality Control of Thermal Spray Coatings on Steel in Seawater." Materials Performance, Vol. 26, No. 9, for Effective Long-Term Performance." Presented at SSPC September 1987, 7 p. International Conference, Dallas, 1995. 4. Naval Sea Systems Command. MIL-STD-2138A, "Metal 21. Cunningham, T., and R. Avery. "Sealer Coatings for Thermal Sprayed Coatings for Corrosion Protection Aboard Naval Sprayed Aluminum in the Offshore Industry." Materials Per- Ships." U.S. Navy, 1994. formance, January 2000, pp. 4648. 5. The Society for Protective Coatings (SSPC). SSPC-SP-5, "White 22. DuPlissie, K. "Lessons Learned of the I-95 Thermal Spray Metal Blast Cleaning." Pittsburgh, September, 2000. Project in Connecticut." Presented at the Fifth World Con- 6. Avery, R. "Application of Thermal Sprayed Coatings in a Shop gress on Coating Systems for Bridges and Steel Structures, St. Environment--Some Practical Considerations." Presented at Louis, 1997. the SSPC International Conference, 1995, Dallas. 23. Gartland, P. O., and T. G. Eggen. "Cathodic and Anodic Prop- 7. Bailey, J. C. "Corrosion Protection of Welded Steel Structures erties of Thermal Sprayed Al- and Zn-Based Coatings in Sea- by Metal Spraying." Metal Construction, Vol. 15, No. 5, May water," Paper Number 367. Corrosion 90, Las Vegas, 1990. 1983, pp. 264266, 268270. 24. Lieberman, E. S., C. R. Clayton, and H. Herman. "Thermally- 8. Fischer, K. P., W. H. Thomason, T. Rosbrook, and J. Murali. Sprayed Active Metal Coatings for Corrosion Protection in Marine Environments." Final Report to Naval Sea Systems "Performance of Thermal Sprayed Aluminum Coatings in the Command, January 1984. Splash Zone and for Riser Service," Paper No. 499. Corrosion 25. Brodar, J. M. "Blundering Towards Success with Metal Spray." 94, NACE, Houston, 1994. Presented at SSPC International Conference, Dallas, 1995. 9. Kratochvil, W. R., and E. Sampson. "High Output Arc Spray- 26. Funahashi, M., and W. T. Young. "Development of a New Sac- ing--Wire and Equipment Selection." Presented at the SSPC rificial Cathodic Protection System for Steel Embedded in Con- International Conference, Orlando, 1998. crete." Report FHWA-RD-96-171. FHWA, Washington, D.C., 10. McGrann, R. T. R., J. Kim, J. R. Shandley, E. F. Rybicki, and May 1997. N. G. Ingesten. "Characterization of Thermal Spray Coatings 27. Bardal, E. "The Effect of Surface Preparation on the Adhesion Used for Dimensional Restoration." Presented at the Interna- of Arc and Flame-Sprayed Aluminum and Zinc Coatings to tional Thermal Spray Conference, Montreal, 2000. Mild Steel." Norwegian Institute of Technology, University of 11. Rosbrook, T., W. H. Thomason, and J. D. Byrd. "Flame Trondheim, Trondheim, Norway. Sprayed Aluminum Coatings Used on Subsea Components." 28. Call, T., and R. A. Sulit. "Protecting the Nation's Infrastructure Materials Performance, September 1989, pp. 3438. with Thermal-Sprayed Coatings." Presented at AWS Interna- 12. Shaw, B. A., and P. J. Moran. "Characterization of the Corro- tional Welding Exposition, Houston, n.d. sion Behavior of Zinc-Aluminum Thermal Spray Coatings," 29. Chandler, K. A. Marine and Offshore Corrosion. Butterworth, DTNSRDC/SME-84/107. Corrosion 85, NACE, Boston, 1985. London, 1985. 13. Begon, V., J. Baudoin, and O. Dugne. "Optimization of the 30. Perkins, R. A. Metallized Coatings for Corrosion Control of Characterization of Thermal Spray Coatings." Presented at the Naval Ship Structures and Components (Report NMAB-409). International Thermal Spray Conference, Montreal, 2000. Committee on Thermal Spray Coatings for Corrosion Control, 14. Bhursari, M., and R. Mitchener. "Ski-Lift Maintenance: Wire National Materials Advisory Board, National Research Council, Arc Spray vs. Galvanizing." Presented at SSPC International National Academy Press, Washington, D.C., February 1983. Conference, Orlando, 1998. 31. Escalante, E., W. P. Iverson, W. F. Gerhold, B. T. Sanderson 15. Bonner, P. E. "The Corrosion of Zinc, Zinc Alloy and Alu- and R. L. Alumbaugh. "Corrosion and Protection of Steel Piles minum Coatings in the Atmosphere." Proceedings of the Fourth in a Natural Seawater Environment." Institution for Materials International Congress on Metallic Corrosion, Houston, 1972, Research, National Bureau of Standards, June, 1977. pp. 751759. 32. Greene, N. D., R. P. Long, J. Badinter, and P. R. Kambala. 16. Ostojic, P., and C. Berndt. "The Variability in Strength of Ther- "Corrosion of Steel Piles." In Innovative Ideas for Controlling mally Sprayed Coatings." National Thermal Spray Conference the Decaying Infrastructure (V. Chaker, ed.), NACE, 1995. Proceedings, ASM International, September 1987, p. 175. 33. Borch, E. A. "Metallic Abrasives" (Chapter 2.2). In Good Paint- 17. Rogers, F. S. "Benefits and Technology Developed to Arc ing Practice, Vol. 1. SSPC International, Pittsburgh, 2000. Spray 3/16 Inch (4.8 mm) Diameter Wires Used for Corrosion 34. Borch, E. A. "Controlling the Centrifugal Blast Cleaning Protection of Steel." Presented at the International Thermal Process." Journal of Protective Coatings and Linings, Vol. 3, Spray Conference, Montreal, 2000. No. 9, September 1986, pp. 2833.

OCR for page 42
44 35. Padavich, J. F. "How to Access Proper Surface Preparation." 43. Bland, J. "Corrosion Testing of Flame-Sprayed Coated Steel-- Journal of Protective Coatings and Linings, Vol. 2, No. 1, Jan- 19 Year Report." American Welding Society, Miami, 1974. uary 1985, pp. 2228. 44. Kain, R. M., and W. T. Young. Corrosion Testing in Natural 36. Personal communication with Hugh Roper, Pan Abrasive, Inc. Waters (2nd Volume). ASTM Report No. STP 1300, West 37. Beitelman, A. D. Recycled Steel Abrasive Grit. ERDC/CERL Conshohocken, Pennsylvania, 1997. TR-01-37. U.S. Army Corps of Engineers, August 2001. 45. Kuroda, S., and M. Takemoto. "Ten Year Interim Report of 38. Hansink, J. D. "Maintenance Tips." Journal of Protective Coat- Thermal Sprayed Zn, Al and Zn-Al Coatings Exposed to ings and Linings, Vol. 11, No. 3, March 1994, p. 66, Figure 1. Marine Corrosion by Japan Association of Corrosion Control." 39. Beitelman, A. D., and W. Corbett. "Evaluation of Surface Presented at the International Thermal Spray Conference, Preparation and Application Parameters for Arc-Sprayed Metal Montreal, 2000. Coatings." U.S. Army Corps of Engineers, CERL, ERDC/ 46. Tsourous, A. "The Restoration of the Historic Trenton Non- CERL TR-01-53, July 2001. NTIS ADA401295. Toll Bridge Using Field Applied Thermal Spray Coatings." 40. Lewis, C. F. "Processing Makes the Difference in Thermal Presented at SSPC International Conference, 1998. Spray Coatings." Materials Engineering, August 1988. 47. Kogler, R. A., J. P. Ault, and C. L. Farschon. "Environmentally 41. LaQue, F. L. Marine Corrosion, Causes and Prevention. John Acceptable Materials for the Corrosion Protection of Steel Wiley and Sons, New York, 1975. Bridges." FHWA-RD-96-058. FHWA, January, 1997. 42. Appleman, B. R. "Advances in Technology and Standards for 48. "Thermal Spraying with Zinc and Zinc/Aluminum Alloy Wire." Mitigating the Effects of Soluble Salts." Journal of Protective Metallize (quarterly newsletter). The Platt Brothers and Com- Coatings and Linings, May 2002, pp. 4247. pany, 1996.