National Academies Press: OpenBook
« Previous: Chapter 4 - Conclusions and Recommendations
Page 76
Suggested Citation:"References." National Academies of Sciences, Engineering, and Medicine. 2010. Mixing and Compaction Temperatures of Asphalt Binders in Hot-Mix Asphalt. Washington, DC: The National Academies Press. doi: 10.17226/14367.
×
Page 76
Page 77
Suggested Citation:"References." National Academies of Sciences, Engineering, and Medicine. 2010. Mixing and Compaction Temperatures of Asphalt Binders in Hot-Mix Asphalt. Washington, DC: The National Academies Press. doi: 10.17226/14367.
×
Page 77

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

76 1. Romagosa, H. “The Market for Polymer Modified Asphalts in the USA — 2003 Volumes and Trends,” Association of Modified Asphalt Producers, http://www.modifiedasphalt.org/library.asp# past, January, 2003. 2. Fink, D.F. and J.A. Lettier. “Viscosity Effects in the Marshall Stabil- ity Test,” AAPT 1951. 3. Parker, C.F. “Use of Steel-Tired Rollers,” Highway Research Board Bulletin No. 246, Highway Research Board, National Research Council, Washington D.C., 1950. 4. Serafin, P.J., L.L Kole, and A.P. Chritz. “Michigan Bituminous Experimental Road: Final Report,” AAPT Vol. 36, 1967. 5. Mix Design Methods for Hot-Mix Asphalt Paving. Manual Series No. 2, First Edition, The Asphalt Institute, April, 1956. 6. Kiefer, R.W. “The Effect of Compaction Temperature on the Prop- erties of Bituminous Concrete,” American Society for Testing and Materials Special Technical Publication No. 294, Sixty-third Annual Meeting Papers, 1960. 7. Mix Design Methods for Asphalt Concrete and Other Hot-Mix Types. Manual Series No. 2, Second Edition, The Asphalt Institute, February, 1962. 8. Bahri, G.R. and L.F. Rader. “Effects of Asphalt Viscosity on Physi- cal Properties of Asphalt Concrete,” Highway Research Record No. 67, Highway Research Board, National Research Council, Washington D.C., 1965. 9. Kennedy, T.W., F.L. Roberts, and R.B. McGennis. “Effects of Com- paction Temperature and Effort on the Engineering Properties of Asphalt Concrete Mixtures,” ASTM Special Technical Publications 829, 1984. 10. Crawley, A.B. “An Evaluation of Lower Mixing Temperatures for Bituminous Paving Mixes,” MSHD-RD-85-069, Mississippi DOT, 1985. 11. Newcomb, D.E., M. Stroup-Gardiner, and J.A. Epps. “Laboratory and Field Studies of Polyolefin and Latex Modifiers for Asphalt Mix- tures,” Polymer Modified Asphalt Binders, ASTM STP 1108, 1992. 12. Aschenbrener, T. and N. Far. “Influence of Temperature and An- tistripping Treatment on the Results from the Hamburg Wheel- Tracking Device, Final Report,” CDOT-DTD-R-94-9, Colorado DOT, July 1994. 13. Azari, H., R.H. McCuen, and K.D. Stuart. “Optimum Compaction Temperature for Modified Binders,” Journal of Transportation Engineering, Vol. 129, Issue 5, September 2003. 14. Bahia, H.U., and D.I. Hanson. “NCHRP Project 9-10 Superpave Protocols for Modified Asphalt Binders,” Draft Topical Report (Task 9), prepared for the National Cooperative Highway Research Program, Transportation Research Board, National Research Coun- cil, Washington, D.C., May 2000. 15. Huner, M.H., and E.R. Brown. “Effects of Re-Heating and Com- paction Temperature on Hot Mix Asphalt Volumetrics,” NCAT Report 01-04, National Center for Asphalt Technology, November 2001. 16. McGennis, R.B., R.M. Anderson, D. Perdomo, and P. Turner. “Issues Pertaining to Use of the Superpave Gyratory Compactor,” Trans- portation Research Record 1543, Transportation Research Board, National Research Council, Washington, D.C., 1996. 17. De Sombre, R., D.E. Newcomb, B. Chadbourn, and V. Voller. “Parameters to Define the Laboratory Compaction Temperature Range for Hot Mix Asphalt,” Journal of the Association of Asphalt Paving Technologists, Vol. 67, 1998. 18. Leiva, F., and R.C. West. “Relationships between Laboratory Mea- sured Characteristics of HMA and Field Compactability,” Proceed- ings, Association of Asphalt Paving Technologists, Vol. 77, 2008. 19. Willoughby, K.A., J.P. Mahoney, L.M. Pierce, J.S. Uhlmeyer, K.W. Anderson, S.A. Read, S.T. Muench, T.R. Thompson, and R. Moore. “Construction Related Asphalt Concrete Pavement Temperature Differentials,” WA-RD 476.1, Washington State Transportation Center, July 2001. 20. Chadbourn, B.A., D.E. Newcomb, V.R. Voller, R.A. De Sombre, J.A. Luoma, and D.H. Timm. “An Asphalt Paving Tool for Adverse Conditions,” MN/RC-1988/18, University of Minnesota, June 1998. 21. Roberts, F.L., P.S. Kandhal, E.R. Brown, D.Y. Lee, and T.W. Kennedy. Hot Mix Asphalt Materials, Mixture Design, and Con- struction, Second Edition, NAPA Education Foundation, 1996. 22. The Asphalt Handbook. Manual Series No.4, Asphalt Institute, 1989. 23. Hot-Mix Asphalt Paving Handbook 2000. Transportation Research Board. 24. Clark, R.G. “Practical Results of Asphalt Hardening on Pavement Life,” AAPT Vol. 27, 1958. 25. Fink, D.F. “Research Studies and Procedures,” AAPT Vol. 27, 1958. 26. Serafin, P.J. “Laboratory and Field Control to Minimize Harden- ing of Paving Asphalts,” AAPT Vol. 27, 1958. 27. Lottman, R.P., S.K. Sonawala, and M. Al-Habboob. “Change of Asphalt Viscosity During Mixing with Hot Aggregates,” AAPT VoL. 32, 1963. 28. Airey, G.D., and S.F. Brown. “Rheological Performance of Aged Polymer Modified Bitumens,” Journal of the Association of Asphalt Paving Technologists, Vol. 67, 1998. References

77 29. Linde, S. and U. Johansson. “Thermo-Oxidative Degradation of Polymer Modified Bitumen,” Polymer Modified Asphalt Binders. ASTM STP 1108, 1992. 30. Stroup-Gardiner, M., and C. Lange. “Hot Mix Asphalt Smoke and Emissions Potential,” presented at the Transportation Research Board 80th Annual Meeting, Washington, D.C., January 2001. 31. Lange, C.R., and M. Stroup-Gardiner. “Quantification of Poten- tially Odorous Volatile Organic Compounds from Asphalt Binders Using Head-Space Gas Chromatography,” Journal of Testing and Evaluation, Mar. 2005, Vol. 33, No. 2. 32. Stroup-Gardiner, M., C.R. Lange, and A. Carter. “Quantification of Emission Potential from Asphalt Binders Using Mass Loss and Opacity Measurements,” International Journal of Pavement Engi- neering. (Publication pending, International Journal for Pavement Engineering.) 33. Whiteoak, D. The Shell Bitumen Handbook, Shell Bitumen U.K., 1st Ed., 1991. 34. Terrel, R.L., and J.A. Epps. “Using Additives and Modifiers in Hot Mix Asphalt,” Quality Improvement Series 114, National Asphalt Pavement Association, 1989. 35. Shuler, T., D. Hanson, and R. McKeen. “Design and Construction of Asphalt Concrete Using Polymer Modified Asphalt Binders,” Polymer Modified Asphalt Binders, ASTM STP 1108, 1992. 36. Shenoy, A. V. “Determination of the Temperature for Mixing Ag- gregates with Polymer-Modified Asphalt.” International Journal of Pavement Engineering, Vol. 2, Number 1, 2001. 37. Albritton, G.E., W.F. Barstis, and A.B. Crawley. “Polymer Modified Hot Mix Asphalt Field Trial,” FHWA/MS-DOT-RD-99-111, 1999. 38. Best Management Practices to Minimize Emissions During HMA Construction, EC 101, Asphalt Pavement Environmental Council (National Asphalt Pavement Association, Asphalt Institute, and State Asphalt Pavement Associations), April 2000. 39. Bahia, H.U., D.I. Hanson, M. Zeng, H. Zhai, M.A. Khatri, and R.M Anderson. NCHRP Report 459: Characterization of Modified Asphalt Binders in Superpave Mix Design, Transportation Research Board, National Research Council, Washington, D.C., 2001. 40. Grover, R. “Determining Mixing and Compaction Temperatures of Asphalt Binders Using Zero Shear Viscosity,” RMAUPG Binder Subcommittee Meeting, October 8, 2002. 41. Tang, Y., and J. Haddock. Field Testing of the Zero Shear Viscosity Method, 2005 TRB Workshop. 42. Khatri, A., H.U. Bahia, and D. Hanson. “Mixing and Compaction Temperatures for Modified Binders using the Superpave Gyratory Compactor,” Journal of the Association of Asphalt Paving Technolo- gists, Vol. 70, 2001. 43. Yildirim, Y., M. Soaimanian, and T.W. Kennedy. “Mixing and Com- paction Temperatures for Hot Mix Asphalt,” University of Texas, Center for Transportation Research, Research Report #1250-5, January 2000. 44. Yildirim, Y., M. Soaimanian, and T.W. Kennedy. “Mixing and Compaction Temperatures for Superpave Mixes,” Journal of the Association of Asphalt Paving Technologists, Vol. 69, 2000. 45. Reinke, G. “Determination of Mixing and Compaction Tempera- ture of PG Binders Using a Steady Shear Flow Test,” presentation made to the Superpave Binder Expert Task Group, http://bridge. ecn.purdue.edu/∼spave/Technical%20Info/Meetings/Binder%20 ETG%20Sept%2003%20Las%20Vegas,%20NV/Reinke_MIX%20 AND%20COMPACTINO%20INFO%20FOR%20ETG%209-15- 03.pdf. September 2003. 46. Sudduth, R., G. Baumgardner, and A. Menapace. “Evaluation of the Measurement of the Non-Newtonian Shear and Extensional Components of Viscosity Using a Brookfield Viscometer for Eight Different Modified Asphalts and One Control,” 2005. 47. Stuart, K.D. “Methodology for Determining Compaction Temper- atures for Modified Asphalt Binders,” FHWA-RD-02-016, Federal Highway Administration, 2002. 48. Marvillet, J. and P. Bougalt. “Workability of Bituminous Mixes. Development of a Workability Meter,” Proceedings, Association of Asphalt Paving Technologists, Vol. 48, 1979. 49. Gudimettla, J.M., L.A. Cooley Jr., and E.R. Brown. “Workability of Hot Mix Asphalt,” NCAT Report 03-03, National Center for Asphalt Technology, April 2003. 50. Gudimettla, J.M., L.A. Cooley Jr., and E.R. Brown. “Workability of Hot Mix Asphalt,” Transportation Research Record 1891, Transporta- tion Research Board of the National Academies, Washington, D.C., 2004. 51. Christenson, D.W. and R.F. Bonaquist. NCHRP Report 530: Evalu- ation of Indirect Tensile Test (IDT) Procedures for Low-Temperature Performance of Hot Mix Asphalt, Transportation Research Board of the National Academies, Washington, D.C., 2004. 52. Dalton, F. “Gyratory Shear and Volumetric Mix Design Using the Pine AFG1 Superpave Gyratory Compactor,” Report 1999-04, Pine Instrument Company.

Next: Appendix A - Responses of Survey on Agency Specifications Regarding Mixing and Compaction Temperatures »
Mixing and Compaction Temperatures of Asphalt Binders in Hot-Mix Asphalt Get This Book
×
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

TRB’s National Cooperative Highway Research Program (NCHRP) Report 648: Mixing and Compaction Temperatures of Asphalt Binders in Hot-Mix Asphalt explores enhanced test methods for determining laboratory mixing and compaction temperatures of modified and unmodified asphalt binders.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!