Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.
OCR for page 27
I. Special Mixture Design Considerations and Methods for Warm Mix Asphalt (WMA) 27 References AASHTO Standards M 320, Standard Specification for Performance-Graded Asphalt Binder R 30, Mixture Conditioning of Hot-Mix Asphalt (HMA) T 166, Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens T 209, Theoretical Maximum Specification Gravity and Density of Bituminous Paving Mixtures T 283, Resistance of Compacted Asphalt Mixture to Moisture-Induced Damage T 312, Preparing and Determining the Density of Hot-Mix Asphalt Specimens by Means of the Superpave Gyra- tory Compactor TP79, Determining the Dynamic Modulus and Flow Number of Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT) Other Publications Bonaquist, R., "Mix Design Practices for Warm Mix Asphalt," NCHRP Report 691, National Cooperative Highway Research Program, Washington, D.C., 2011. Christensen, D. W., "A Manual for the Design of Hot Mix Asphalt with Commentary," NCHRP Report 673, National Cooperative Highway Research Program, Washington, D.C., 2010. Prowell, B. D., and Hurley, G. C., "Warm-Mix Asphalt: Best Practices," Quality Improvement Series 125, National Asphalt Pavement Association, Lanham, MD, 2007.