Click for next page ( 45

The National Academies of Sciences, Engineering, and Medicine
500 Fifth St. N.W. | Washington, D.C. 20001

Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement

Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 44
II. Commentary on Special Mixture Design Considerations and Methods for Warm Mix Asphalt (WMA) C-17 WMA process, WMA additive rate, Planned production temperature, and Planned compaction temperature. References Bonaquist, R., "Mix Design Practices for Warm Mix Asphalt," NCHRP Report 691, National Cooperative Highway Research Program, Washington, D.C., 2011. Christensen, D. W., "A Manual for the Design of Hot Mix Asphalt with Commentary," NCHRP Report 673, National Cooperative Highway Research Program, Washington, D.C., 2010. Prowell, B. D., and Hurley, G. C., "Warm-Mix Asphalt: Best Practices," Quality Improvement Series 125, National Asphalt Pavement Association, Lanham, MD, 2007.