Click for next page ( 42

The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement

Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 41
31 23.Liang, Y., W. Zhang, and Y. Xi, Strategic Evaluation of Different Topical Protection Systems for Bridge Decks [accessed June 8, 2011]. and the Associated Life-Cycle Cost Analysis, Report No. CDOT-2010-6, Colorado Department of Transportation, Denver, 2010, 71 pp. REFERENCED STANDARDS BY ASTM INTERNATIONAL 24.Korhonen, C.J., J.S. Buska, E.R. Cortez, and A.R. Gre- C900 Standard Test Method for Pullout Strength of Hard- atorex, Procedures for the Evaluation of Sheet Membrane ened Concrete Waterproofing, Report NETCR 13, U.S. Army Corps of D5 Standard Test Method for Penetration of Bituminous Engineers Cold Regions Research and Engineering Lab- Materials oratory, Hanover, N.H., 1999, 67 pp. (Also published as CRREL Special Report 99-11.) D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) 25.European Organisation for Technical Approvals (EOTA), Determination of the Resistance to the Passage of Chlo- D41/D41M Standard Specification for Asphalt Primer Used ride Ions through Waterproofing Layer Subjected to in Roofing, Dampproofing, and Waterproofing Indentation by Aggregate, European Organisation for D146 Standard Test Methods for Sampling and Testing Bitu- Technical Approvals, Report No. TR 022, Nov. 2007, 9 pp. men-Saturated Felts and Woven Fabrics for Roofing and 26.McKeel, W.T., A Commentary on the Implementation of Waterproofing Virginia Test Method Number 39, Electrical Resistivity D173 Standard Specification for Bitumen-Saturated Cotton Testing of Waterproof Membranes, Report No. VHTRC Fabrics Used in Roofing and Waterproofing 76-R57, Virginia Highway & Transportation Research Council, May 1976, 11 pp., plus appendices. D449 Standard Specification for Asphalt Used in Damp- proofing and Waterproofing 27.Morey, R.M., NCHRP Synthesis of Highway Practice 255: Ground Penetrating Radar for Evaluating Subsur- D517 Standard Specification for Asphalt Plank face Conditions for Transportation Facilities, National D882 Standard Test Method for Tensile Properties of Thin Research Council, Transportation Research Board, Plastic Sheeting Washington, D.C., 1998, 37 pp. D1228 (Withdrawn Standard) Methods of Testing Asphalt 28.Stimolo, M., "Practical Utilization of Thermography in Insulating Siding Surfaced with Mineral Granules (With- Road Construction and in Waterproofing Systems," The drawn 1982) International Society for Optical Engineering (SPIE) Proceedings, Vol. 4710, 2002, pp. 299306. D1668 Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing 29.ACI Committee 228, Non-destructive Test Methods for Evaluation of Concrete in Structures (ACI 228.2R-98), D1777 Standard Test Method for Thickness of Textile Materials American Concrete Institute, Farmington Hills, Mich., D3236 Standard Test Method for Apparent Viscosity of Hot 1998, 59 pp. Melt Adhesives and Coating Materials 30.LCPC, Non-Destructive Testing in LCPC, An Overview, D3515 (Historical Standard) Standard Specification for Hot- Laboratoire Central des Ponts et Chausses, Paris, Apr. Mixed, Hot-Laid Bituminous Paving Mixtures (D3515 2008. [Online]. Available: does not appear to be the correct number for this AAS- onlinepubs/shrp2/tra_2008_oa07_bis_modified.pdf HTO specification.) [accessed June 8, 2011]. D3633 Standard Test Method for Electrical Resistivity of 31.Boisvert, D.M., Evaluation of the Bond between Barrier Membrane-Pavement Systems Membrane and Concrete Bridge Decks, Draft Report No. FHWA-NH-RD-12323G, New Hampshire Department of D4071 Standard Practice for Use of Portland Cement Con- Transportation, Concord, 2003, unpublished. crete Bridge Deck Water Barrier Membrane System 32.Martinelli, P., Bridge Deck Waterproofing Membrane Eval- D4541 Standard Test Method for Pull-Off Strength of Coat- uation, Alaska Department of Transportation and Public ings Using Portable Adhesion Testers Facilities, Report No. AK-RD-96-04, Sep. 1996, 69 pp. D4632 Standard Test Method for Grab Breaking Load and 33.Transportation Research Circular E-C-022: Mainte- Elongation of Geotextiles nance Research Master Planning Workshop, Transporta- D4787 Standard Practice for Continuity Verification of Liq- tion Research Board of the National Academies, uid or Sheet Linings Applied to Concrete Substrates Washington, D.C., Nov. 2000 [Online]. Available: http://

OCR for page 41
32 D6153 Standard Specification for Materials for Bridge Deck E96/E96M Standard Test Methods for Water Vapor Trans- Waterproofing Membrane Systems mission of Materials D6690 Standard Specification for Joint and Crack Sealants, E154 Standard Test Method for Water Vapor Retarders Used Hot Applied, for Concrete and Asphalt Pavements in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover