APPENDIX

B

Panels of the Committee on Analysis of Research Directions and Needs in U.S. Manufacturing

PANEL ON INTELLIGENT MANUFACTURING CONTROL

AVAK AVAKIAN, Cochairman, Vice President (retired), GTE Government Systems, Concord, Massachusetts

RAMCHANDRAN JAIKUMAR, Cochairman, Professor of Business Administration, Graduate School of Business Administration, Harvard University, Boston, Massachusetts

CHRISTOPHER S. FUSELIER, Manager, Cell Control Programs, GE Fanuc Automation North America, Inc., Charlottesville, Virginia

YU-CHI HO, Gordon McKay Professor of Engineering and Applied Mathematics, Harvard University, Cambridge, Massachusetts

DAVID A. HODGES, Professor of Electrical Engineering and Computer Sciences, University of California, Berkeley

JOEL MOSES, Dean of Engineering, Massachusetts Institute of Technology, Cambridge

DAVID W. RUDY, Information Systems Liaison to Manufacturing, E.I. du Pont de Nemours & Company, Wilmington, Delaware

GEORGE N. SARIDIS, Professor, Electrical Computer Systems Engineering Department, Rensselaer Polytechnic Institute, Troy, New York

ED SHAMAH, Manager of Advanced Manufacturing Systems, Intel Corporation, Chandler, Arizona

HARRY E. STEPHANOU, Director, Center for Advanced Technology in Automation and Robotics, Rensselaer Polytechnic Institute, Troy, New York



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement



Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 154
THE COMPETITIVE EDGE: Research Priorities for U.S. Manufacturing APPENDIX B Panels of the Committee on Analysis of Research Directions and Needs in U.S. Manufacturing PANEL ON INTELLIGENT MANUFACTURING CONTROL AVAK AVAKIAN, Cochairman, Vice President (retired), GTE Government Systems, Concord, Massachusetts RAMCHANDRAN JAIKUMAR, Cochairman, Professor of Business Administration, Graduate School of Business Administration, Harvard University, Boston, Massachusetts CHRISTOPHER S. FUSELIER, Manager, Cell Control Programs, GE Fanuc Automation North America, Inc., Charlottesville, Virginia YU-CHI HO, Gordon McKay Professor of Engineering and Applied Mathematics, Harvard University, Cambridge, Massachusetts DAVID A. HODGES, Professor of Electrical Engineering and Computer Sciences, University of California, Berkeley JOEL MOSES, Dean of Engineering, Massachusetts Institute of Technology, Cambridge DAVID W. RUDY, Information Systems Liaison to Manufacturing, E.I. du Pont de Nemours & Company, Wilmington, Delaware GEORGE N. SARIDIS, Professor, Electrical Computer Systems Engineering Department, Rensselaer Polytechnic Institute, Troy, New York ED SHAMAH, Manager of Advanced Manufacturing Systems, Intel Corporation, Chandler, Arizona HARRY E. STEPHANOU, Director, Center for Advanced Technology in Automation and Robotics, Rensselaer Polytechnic Institute, Troy, New York

OCR for page 154
THE COMPETITIVE EDGE: Research Priorities for U.S. Manufacturing Liaisons to the National Center for Manufacturing Sciences JONATHAN GOLOVIN, Chairman, Consilium, Inc., Mountain View, California THOMAS L. HAYNES, Senior Member Technical Staff, Industrial Systems Division, Texas Instruments, Inc., Johnson City, Tennessee

OCR for page 154
THE COMPETITIVE EDGE: Research Priorities for U.S. Manufacturing PANEL ON EQUIPMENT RELIABILITY AND MAINTENANCE STEVEN J. BOMBA, Cochairman, Vice President of Technology, Johnson Controls, Inc., Milwaukee, Wisconsin HRIDAY R. PRASAD, Cochairman, Manager of Technology Planning, North American Automotive Manufacturing Operations, Ford Motor Company, Dearborn, Michigan GIFFORD M. BROWN, Plant Manager, Engine Division, Ford Motor Company, Brook Park, Ohio ROBERT E. BRUCK, Manager, Corporate Capital Acquisition, Intel Corporation, Chandler, Arizona CHARLES E. EBERLE, Executive Vice President, Consumer Products Business, James River Corporation, Richmond, Virginia JOSEPH T. KAMMAN, Director of Technical Services, Cincinnati Milacron, Inc., Cincinnati, Ohio P. RANGANATH NAYAK, Vice President, Operations Management, Arthur D. Little, Inc., Cambridge, Massachusetts MICHAEL H. O'NEAL, Director, Operations Research, Northern Telecom, Inc., Nashville, Tennessee HENRY W. STOLL, Technical Director—Design Technology, Square D Company, Palatine, Illinois KHALIL S. TARAMAN, Dean, School of Engineering, Lawrence Technological University, Southfield, Michigan ROBERT L. YEATON, Manager, Manufacturing Automation Technology, GE Aircraft Engines, Lynn, Massachusetts Liaisons to the National Center for Manufacturing Sciences LEONARD ALLGAIER, Manager, Power Train Manufacturing, GM Technology Center, Warren, Michigan GRAHAM D. COTTAM, Vice President, H. R. Krueger Machine Tool, Inc., Farmington, Michigan

OCR for page 154
THE COMPETITIVE EDGE: Research Priorities for U.S. Manufacturing PANEL ON MANUFACTURING OF AND WITH ADVANCED ENGINEERED MATERIALS MELVIN BERNSTEIN, Cochairman, Provost and Academic Vice President, Illinois Institute of Technology, Chicago R. BYRON PIPES, Cochairman, Dean, College of Engineering, University of Delaware, Newark DANIEL G. BACKMAN, Manager, Intelligent Processing of Materials Technology, GE Aircraft Engines, Lynn, Massachusetts H. KENT BOWEN, Ford Professor of Engineering, Massachusetts Institute of Technology, Cambridge JOEL P. CLARK, Professor, Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge THOMAS C. McGILL, Fletcher Jones Professor of Applied Physics, California Institute of Technology, Pasadena MICHAEL V. NEVITT, Senior Metallurgist, Materials Science Division, Argonne National Laboratory, Argonne, Illinois DAVID J. SROLOVITZ, Associate Professor, Materials Science and Engineering and Applied Physics, University of Michigan, Ann Arbor BEN G. STREETMAN, Director, Microelectronics Research Center, University of Texas, Austin KURT F. WISSBRUN, Senior Research Associate, Hoechst-Celanese Corporation, Summit, New Jersey Liaison to the Department of Defense VINCENT J. RUSSO, Director, Air Force Wright Aeronautical Laboratory, Wright-Patterson Air Force Base, Ohio Liaison to the Committee JAMES C. WILLIAMS, Department Manager, Engineering Materials Technology Laboratory, General Electric Company, Cincinnati, Ohio Liaisons to the National Center for Manufacturing Sciences CHARLES BEETZ, Director, Thin Films R&D, Advanced Technology Materials, Inc., New Milford, Connecticut FOSTER LAMM, Senior Research Scientist, United Technologies Research Laboratories, East Hartford, Connecticut

OCR for page 154
THE COMPETITIVE EDGE: Research Priorities for U.S. Manufacturing PANEL ON RAPID PRODUCT REALIZATION PROCESS A. TIM SHERROD, Cochairman, President, Savant Solutions Company, Menlo Park, California MICHAEL J. WOZNY, Cochairman, Director, Rensselaer Design Research Center, Rensselaer Polytechnic Institute, Troy, New York HARRIS M. BURTE, Chief Scientist, Air Force Materials Laboratory, Wright-Patterson Air Force Base, Ohio DON P. CLAUSING, Bernard M. Gordon Adjunct Professor of Engineering Innovation and Practice, Massachusetts Institute of Technology, Cambridge GEORGE FOO, Director, Manufacturing and Engineering Director, AT&T Company, Little Rock, Arkansas MARK S. FOX, Associate Professor of Computer Science and Robotics, Carnegie Mellon University, Pittsburgh, Pennsylvania GARY MARKOVITS, Program Manager for Patent Processes, IBM Corporation, Stormytown, Yorktown Heights, New York STUART G. MILLER, Manager, Automation Systems Laboratory, General Electric Company, Schenectady, New York JAMES P. PRENDERGAST, Engineering Manager, Intel Corporation, Chandler, Arizona FRIEDRICH B. PRINZ, Professor, Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania JERRY L. PYLES, Manager, Architecture and Standards, SEMATECH, Austin, Texas Liaison to the Committee GUSTAV J. OLLING, Chief, Automotive Research and CAD/CAM User Systems, Chrysler Corporation, Highland Park, Michigan Liaisons to the National Center for Manufacturing Sciences DANIEL J. MAAS, Manager, State of the Art Assessments, National Center for Manufacturing Sciences, Ann Arbor, Michigan LARRY McARTHUR, President and Chief Executive Officer, Aries Technology, Inc., Lowell, Massachusetts

OCR for page 154
THE COMPETITIVE EDGE: Research Priorities for U.S. Manufacturing PANEL ON MANUFACTURING SKILLS IMPROVEMENT GERARDO BENI, Cochairman, Director, Center for Robotics Systems in Microelectronics, University of California, Santa Barbara WILLIAM G. HOWARD, JR., Cochairman, Senior Fellow, National Academy of Engineering, Scottsdale, Arizona CARLTON BRAUN, Vice President and Director, Motorola Management Institute, Schaumburg, Illinois R. SCOTT FOSLER, Vice President and Director of Government Studies, Committee for Economic Development, Washington, D.C. PHILIP H. FRANCIS, Vice President, Corporate Technical Center, Square D Company, Palatine, Illinois C. ROLAND HADEN, Dean, College of Engineering and Applied Sciences, Arizona State University, Tempe JACQUES KOPPEL, President, Greater Minnesota Corporation, Minneapolis, Minnesota ROY H. MATTSON, Academic Vice President, National Technical University, Fort Collins, Colorado STUART A. ROSENFELD, Deputy Director, The Southern Growth Policies Board, Research Triangle Park, North Carolina JAMES J. SOLBERG, Engineering Research Center for Intelligent Manufacturing Systems, Purdue University, West Lafayette, Indiana F. KARL WILLENBROCK, Assistant Director, Scientific, Technological, and International Affairs, National Science Foundation, Washington, D.C. Liaisons to the National Center for Manufacturing Sciences PETER D. HALL, Director of Asia-Pacific Sales, The Gleason Works, Rochester, New York ALFRED D. ZEISLER, Manager, Manufacturing Systems, AT&T Company, Berkeley Heights, New Jersey

OCR for page 154
THE COMPETITIVE EDGE: Research Priorities for U.S. Manufacturing PANEL ON ALTERNATIVE CONCEPTS IN MANUFACTURING DAN L. SHUNK, Chairman, Director, CIM Systems Research Center, Arizona State University, Tempe MICHAEL G. BORRUS, Deputy Director, Berkeley Roundtable on the International Economy, University of California, Berkeley CLINTON W. KELLY III, Corporate Vice President, Advanced Technology Programs, Science Applications International Corporation, McLean, Virginia MICHAEL M. KUTCHER, Manufacturing Consultant, IBM Corporation, Kingston, New York THOMAS J. LINDEM, Vice President of Technology, The Ingersoll Milling Machine Company, Rockford, Illinois CHARLES R. McLEAN, Computer Scientist, Group Leader, Production Management Systems, Factory Automated Systems Division, National Institute of Standards and Technology, Gaithersburg, Maryland GARY L. MICHAELSON, Vice President of Operations, Boeing Commercial Airplane Group, Wichita Division, Wichita, Kansas ROGER N. NAGEL, Harvey Wagner Professor of Manufacturing Systems Engineering, Lehigh University, Bethlehem, Pennsylvania PHILIP A. PARRISH, Vice President, Concurrent Engineering Technology, BDM International, Inc., Arlington, Virginia Liaison to the Industrial Technology Institute GEORGE H. KUPER, President, Industrial Technology Institute, Ann Arbor, Michigan Liaisons to the National Center for Manufacturing Sciences GARY W. COTTEN, Production Engineering Manager, Texas Instruments, Inc., Lewisville, Texas E. DENNIS WISNOSKY, President, Wizdom Systems, Inc., Naperville, Illinois