Karaolis, N. M., P. J. Musgrove, and G. Jeronimidis. 1987. Passive Aerodynamic Control Using Composite Blades. Proceedings of Workshop on the Use of Composite Materials for Wind Turbines. ETSU-N-109, Harwell, England, November 4, pp. 71-101.

Kosmatka, J. B. 1986. Structural Dynamic Modeling of Advanced Composite Propellors by the Finite Element Method. Ph.D. dissertation, University of California, Los Angeles.


Lee, S. W., and A. D. Stemple. 1987. A Finite Element Model for Composite Beams with Arbitrary Cross-Sectional Warping. Proceedings of the 28th Structures, Structural Dynamics and Materials Conference. AIAA Paper No. 87-0773, Monterey, California, April 6-8, pp. 304-313.


Ormiston, R. A., W. G. Bousman, D. H. Hodges, and D. A. Peters. 1976. Hingeless Helicopter Rotor with Improved Stability. United States Patent 3,999,886. December 28.

Ormiston, R. A., W. G. Warmbrodt, D. H. Hodges, and D. A. Peters. 1988. Rotorcraft Aeroelastic Stability (Army/NASA Research 1967-1987). NASA Conference Publication 2495, Vol. l, pp. 353-529.


Rehfield, L. W. 1985. Design Analysis Methodology for Composite Rotor Blades. Presented at the 7th DoD/NASA Conference on Fibrous Composites in Structural Design. AFWAL-TR-85-3094, Denver, Colorado, June 17-20, pp. (V(a)-1)-(V(a)-15).

Rehfield, L. W., and A. R. Atilgan. 1987. Analysis, Design and Elastic Tailoring of Composite Rotor Blades. Final Report, Grant No. NAG-l-638. U.S. Army Aerostructures Directorate, Langley Research Center.

Rehfield, L. W., A. R. Atilgan, and D. H. Hodges. 1990. Nonclassical Behavior of Thin-Walled Composite Beams with Closed Cross Sections. American Helicopter Society, Vol. 35, No. 2, pp. 42-50.


Shirk, M. H., T. J. Hertz, and T. A. Weisshaar. 1986. Aeroelastic Tailoring--Theory, Practice, and Promise. Journal of Aircraft, Vol. 23, No. 1, pp. 6-18.

Stoddard, F., V. Nelson, K. Starcher, and B. Andrews. Horizontal Axis Wind Turbine (HAWT) Elastic Twist Determination. Final Report. SERI Contract RL-6-06013.


Watson, R. 1989. Space Frame Wind Turbine. Ninth ASME Wind Energy Symposium. New Orleans, January, pp. 93-99.

Wörndle, R. 1982. Calculation of the Cross Section Properties and the Shear Stresses of Composite Rotor Blades. Vertica, Vol. 6, pp. 111-129.

Wörndle, R., and H. Mang, 1984. Zur Schubspannungs verteilung und Schubsteifigkeit bei querkraftbeanspruchten, inhomogenen Querschitten beliebiger Form aus orthotropen Werkstoffen. Ingenieur-Archiv, Vol. 54, pp. 25-42.

Wright, A. D., B. L. Buhl, and R. W. Thresher. 1988. FLAP Code Development and Validation, SERI/TR-217-3125, Solar Energy Research Institute Report, Golden, Colorado.



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement