REFERENCES AND BIBLIOGRAPHY

Braswell, J. L., and B. F. Robertson. 1985. New Wings for the Huey. American Helicopter Society National Specialists' Meeting on Composites Manufacturing.


Chai, H., C. D. Babcock, and W. G. Knauss. 1981. One Dimensional Modeling of Failure in Laminated Plates by Delamination Buckling. International Journal of Solids and Structures, Vol. 17, Nov. 11.

Challis, A. L. 1987. Use of Composite Materials for Wind Turbines. Proceedings of BWEA/DEN Workshop, Harwell.

Chan, W. S., C. W. Rogers, J. D., Cronkite, and J. Martin. 1986. Delamination Control of Composite Rotor Hubs. Journal of the American Helicopter Society, August.

Covington, C. E. 1990. Composite Structural Applications in Helicopter Rotors. World Aerospace Technology 90, March.


Friedman, H. W. 1988. Design and Fabrication of an Advanced Light Rotor. 44th Annual Forum and Technology Display, AHS.


Goldsworthy, B. 1990. VA Wind Turbine Blades Made by the Pultrusion Process . NRC Workshop on Assessment of Research Needs for Wind Turbine Rotors, Washington, D.C., January 22-23.


Hause, J. H. 1989. The Four-Bladed Main Rotor System for the AH-1W Helicopter. 45th Annual Forum of the AHS.


Lagace, P. A. 1985. The Effect of Ply Thickness on Longitudinal Splitting and Delamination in Graphite Epoxy Under Compressive Load. ASTM Fatigue and Fracture.


Mandell, J. F., F. J. McGarry, A.J. Hsieh, and C. G. Li. 1985. Polymer Composites.

Monroe, R. C. 1990. Cooling Tower Fan Blades Made by the RTM Process. NRC Workshop on Assessment of Research Needs for Wind Turbine Rotors, Washington, D.C., January 22-23.

Morse, A., and M. R. Piggon. 1990. Relation Between Fiber Divagation and Compressive Properties of Fiber Composites. 35th International SAMPE Symposium.


O'Brien, T. K. 1980. Characterization of Delamination Onset and Growth in a Composite Laminate. Damage in Composite Materials, ASTM STP 775.

O'Brien, T. K. 1988. Towards a Damage Tolerance Philosophy for Composite Materials and Structures. NASA TM 100548.


Policelli, F. 1990. Filament Winding and Fiber Placement Techniques Applied to Wind Turbine Blades. NRC Workshop on Assessment of Research Needs for Wind Turbine Rotors, Washington, D.C., January 22-23.

Prandy, J. M., and H. T. Hahn. 1990. Compressive Strength of Carbon Fibers. 35th International SAMPE Symposium.


Rai, H. G., and R. A. Brockman. 1988. Cure Induced Microcracking of Composite Materials. Proceedings of 4th Japan-U.S. Conference on Composite Materials, pp. 732.

Reifsnider, K. L., ed. 1980. Damage in Composite Materials, ASTM STP 775.



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement