Carlson, E.J., P. Kopf, J. Sinha, and S. Sriramulu. 2005. Cost Analysis of PEM Fuel Cell Systems for Transportation. Subcontract Report NREL/SR-560-39104. National Renewable Energy Laboratory. U.S. Department of Energy. September 30.
Carpenter, Jr., J., U.S. Department of Energy. 2008. “Challenges to Automotive Composites.” Presentation to the American Chemistry Council, Plastics Division, Arlington, Va., May 20. Washington, D.C.
DOT (Department of Transportation). 2011. ITS Strategic Research Plan. Washington, D.C.: U.S. Department of Transportation, Research and Innovative Technology Administration. June. Available at via http://www.rita.dot.gov.
EPA (Environmental Protection Agency). 2010a. Final Rulemaking to Establish Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards, Regulatory Impact Analysis. Washington, D.C. April. Available at http://epa.gov/oms/climate/regulations/420r10009.pdf.
———. 2010b. Light-Duty Automotive Technology, Carbon Dioxide Emissions, and Fuel Economy Trends: 1975 Through 2010. EPA-420-R-10-023. Compliance and Innovative Strategies Division and Transportation and Climate Division, Office of Transportation and Air Quality. November. Available at http://www.epa.gov/oms/cert/mpg/fetrends/420r10023.pdf.
EPA, DOT, CARB (California Air Resources Board). 2010. Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards for Model Years 2017-2025. Interim Joint Technical Assessment Report. Available at http://www.epa.gov/oms/climate/regulations/ldv-ghg-tar.pdf.
EPA, NHTSA (National Highway Traffic Safety Administration), CARB. 2010. Interim Joint Technical Assessment Report: Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards for Model Years 2017-2025. Washington, D.C.
FEV (FEV, Inc.). 2012. FEV, Light-Duty Vehicle Technology Cost Analysis—European Vehicle Market (Phase 1). Analysis Report BAV 10-449-001. Prepared for the International Council on Clean Transportation.
Ford (Ford Motor Company). 2012. Bill Ford Outlines “Blueprint for Mobility” Vision; Calls on Mobile Industry to Help Develop Transportation Solutions. Press Release. Available at http://media.ford.com.
Gibbs, W.W. (2006). Innovations from a robot rally. Scientific American, January. Available at http://www.scientificamerican.com/article.cfm?id=innovations-from-a-robot-2006-01&sc=I100322.
Hua, T., R. Ahluwalia, J. Peng, M. Kromer, S. Lasher, K. McKenney, K. Law, and J. Sinha. 2011. Technical assessment of compressed hydrogen storage tank systems for automotive applications. International Journal of Hydrogen Energy 36(4):3037-3049.
IBIS (IBIS Associates, Inc.). 2008. Aluminum Vehicle Structure: Manufacturing and Lifecycle Cost Analysis Hybrid Drive and Diesel Fuel Vehicles. Report by IBIS Associates for The Aluminum Association. May 2008. Available at http://www.drivealuminum.org/research-resources/documents/2008-ibis-powertrain-study.
James, B.D., J.A. Kalinoski, and K.N. Baum. 2010. Mass Production Cost Estimation for Direct H2 PEM Fuel Cell Systems for Automotive Applications: 2010 Update. NREL Report No. SR-5600-49933. Directed Technologies, Inc. Available at http://www1.eere.energy.gov/hydrogenandfuelcells/pdfs/dti_80kwW_fc_system_cost_analysis_report_2010.pdf. (Summary slides, B.D. James, J.A. Kalinoski, and K.N. Baum, Mass-Production Cost Estimation for Automotive Fuel Cell Systems, DOE H2 Program Review 2010, available at http://www.hydrogen.energy.gov/pdfs/review10/fc018_james_2010_o_web.pdf).
Jorgensen, S. 2011. Hydrogen storage tanks for vehicles: Recent progress and current status. Current Opinion in Solid State and Materials Science 15:39-43.
Kahane, C. 2011. Relationships Between Fatality Risk, Mass, and Footprint in Model Year 2000-2007 Passenger Cars and LTVs. NHTSA. Available at http://www-nrd.nhtsa.dot.gov/Pubs/811665.pdf.