Ecomaa Lighting, Inc. Undated. New 80W LED PAR Lamp with Fan Inside. Available at Accessed September 5, 2012.

EMerge Alliance. 2012. Our Mission. Available at

Fabris, D., M. Rosshirt, C. Cardenas, P. Wilhite, T. Yamada, and C.Y. Yang. 2011. Application of carbon nanotubes to thermal interface materials. Journal of Electronic Packaging 133:020902.

Hoelen, C., H. Borel, J. de Graaf, M. Keuper, M. Lankhorst, C. Mutter, L. Waumans, and R. Wegh. 2008. Remote phosphor LED modules for general illumination: Toward 200 lm/W general lighting LED light sources. Paper presented at Eighth International Conference on Solid State Lighting. Bellingham, Wash.: SPIE.

IES (Illuminating Engineering Society). 2008a. Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products. New York: Illuminating Engineering Society.

IES. 2008b. Approved Method: Measuring Lumen Maintenance of LED Light Sources. New York: Illuminating Engineering Society.

International Electrotechnical Commission. 2009. Electromagnetic compatibility (EMC), Part 3-2: Limits for harmonic current emissions (equipment input current ≤16 A per phase). Geneva, Switzerland.

Lighting Research Center. 2012. SSL Recent Projects: Performance, Metrics and Test Methods. Available at Accessed August 3, 2012.

Narendran, N. 2012. Updating a Legacy: Trading up Edison’s Light Bulb and Electrical Infrastructure. Paper presented at 13th International Symposium on the Science and Technology of Lighting, Troy, New York. Sheffield, U.K.: Foundation of the Advancement of the Science and Technology of Lighting Sources.

Narendran, N., J.P. Freyssinier, and J. Taylor. 2008. LED luminaire performance: Changing traditions can set the right expectations. LEDs Magazine, June, pp. 33-39.

Narendran, N., Y. Gu, J.P. Freyssinier-Nova, and Y. Zhu. 2005. Extracting phosphor-scattered photons to improve white LED efficiency. Physica Status Solidi A—Applications and Materials Science 202(6):R60-R62.

National Lighting Product Information Program. 2010. Streetlights for collector roads. NLPIP Specifier Reports 13(1). Troy, N.Y.: Rensselaer Polytechnic Institute.

NEMA (National Electrical Manufacturers Association). 2010a. Electronic Drivers for LED Devices, Arrays, or Systems. Rosslyn, Va.: National Electrical Manufacturers Association.

NEMA. 2010b. Solid-State Lighting for Incandescent Replacement-Dimming. Rosslyn, Va.: National Electrical Manufacturers Association.

NEMA. 2011. Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge Ballasts. Rosslyn, Va.: National Electrical Manufacturers Association.

Next Generation Lighting Industry Alliance. 2011. LED Luminaire Lifetime: Recommendations for Testing and Reporting Solid-State Lighting Product Quality Initiative. Washington, D.C.: U.S. Department of Energy.

Next Generation Luminaires. 2012. Next Generation Luminaires. Available at Accessed August 2, 2012.

Peters, L. 2012. Are MR16 LED lamps ready for the 50W-halogen switch? LEDs Magazine. June.

Thomas, B.A., I.L. Azevedo, and G. Morgan. 2012. Edison revisited: Should we use DC circuits for lighting in commercial buildings? Energy Policy 45:399-411.

Tsais, Y.-P., and C. Hung. 2011. Design of optical components for a light emitting diode zoom illumination system. Optical Review 18(2):224-230.

Zhang, K., D.G.W. Xiao, X. Zhang, H. Fan, Z. Gao, and M.M.F. Yuen. 2011. Thermal performance of LED packages for solid state lighting with novel cooling solutions. Pp.1/7-7/7 in 2011 12th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). Piscataway, N.J.: Institute of Electrical and Electronics Engineers.

Zhaga Consortium. 2012. Zhaga: Making LED light sources interchangeable. Available at Accessed September 5, 2012.

The National Academies of Sciences, Engineering, and Medicine
500 Fifth St. N.W. | Washington, D.C. 20001

Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement