1

Workshop Introduction: Welcome and Meeting Objectives

Robert Schafrik welcomed participants to the Workshop on New and Novel Processes on the Verge of Industrial Modernization, an activity of the National Research Council’s (NRC’s) Standing Committee on Defense Materials, Manufacturing and Infrastructure (DMMI). The DMMI committee, which is under the auspices of the NRC National Materials and Manufacturing Board (NMMB), meets at the request of its sponsor, Reliance 21, a Department of Defense (DOD) group of professionals established in the DOD science and technology (S&T) community to increase awareness of DOD S&T activities and increase coordination among the DOD services, components, and agencies. Dr. Schafrik explained that this workshop would focus on three topics: additive manufacturing, electromagnetic field manipulation of materials, and design of materials. He explained that the workshop is an open meeting, that the publication produced from the workshop will be publicly available several months after the workshop concludes, and that no classified, proprietary, or For Official Use Only information was to be presented or discussed during the workshop. The workshop publication summarizes the discussions and presents the views of individual participants. There are no conclusions or recommendations that reflect a corporate or consensus position of the DMMI, the NMMB, or any other entity of the NRC. The report will serve as record of the activity, not a consensus report.



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement



Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 11
1 Workshop Introduction: Welcome and Meeting Objectives Robert Schafrik welcomed participants to the Workshop on New and Novel Processes on the Verge of Industrial Modernization, an activity of the National Research Council’s (NRC’s) Standing Committee on Defense Materials, Manu- facturing and Infrastructure (DMMI). The DMMI committee, which is under the auspices of the NRC National Materials and Manufacturing Board (NMMB), meets at the request of its sponsor, Reliance 21, a Department of Defense (DOD) group of professionals established in the DOD science and technology (S&T) community to increase awareness of DOD S&T activities and increase coordination among the DOD services, components, and agencies. Dr. Schafrik explained that this workshop would focus on three topics: additive manufacturing, electromagnetic field manipulation of materials, and design of materials. He explained that the workshop is an open meeting, that the publication produced from the workshop will be publicly available several months after the workshop concludes, and that no classified, proprietary, or For Official Use Only information was to be presented or discussed during the workshop. The workshop publication summarizes the discus- sions and presents the views of individual participants. There are no conclusions or recommendations that reflect a corporate or consensus position of the DMMI, the NMMB, or any other entity of the NRC. The report will serve as record of the activity, not a consensus report. 11