References

Bourell, D., M.C. Leu, and D.W. Rosen. 2009. Roadmap for Additive Manufacturing: Identifying the Future of Freeform Processing, Workshop Report, Austin, Tex.

Brady, M.P., Y. Yamamoto, M.L. Santella, P.J. Maziasz, B.A. Pint, C.T. Liu, Z.P. Lu, and H. Bei. 2008. The development of alumina-forming austenitic stainless steels for high-temperature structural use, JOM 60(7):12-18.

Granroth, G., C. Broholm, F. Klose, G. Srajer, Z. Islan, Y. Lee, and J. Lang. 2005. Report from Probing Matter at High Magnetic Fields with X-Rays and Neutrons. Available at http://neutrons.ornl.gov/workshops/Final_report_2005_Probing%20Matter.pdf. Accessed January 11, 2013.

Hulbert, D.M., A. Anders, D. Dudina, D. Jiang, C. Unuvar, U. Anselmi-Tamburini, E. Lavarnia, and A. Mukherjee. 2008. The absence of plasma in “spark plasma sintering.” Journal of Applied Physics 104: 033305.

National Research Council. 2004. Accelerating Technology Transition: Bridging the Valley of Death for Materials and Processes. The National Academies Press, Washington, D.C.

Wohlers Associates. 2012. Additive Manufacturing and 3D Printing State of the Industry: Annual Worldwide Progress Report. Fort Collins, Colo.



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement



Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 56
References Bourell, D., M.C. Leu, and D.W. Rosen. 2009. Roadmap for Additive Manufacturing: Identifying the Future of Freeform Processing, Workshop Report, Austin, Tex. Brady, M.P., Y. Yamamoto, M.L. Santella, P.J. Maziasz, B.A. Pint, C.T. Liu, Z.P. Lu, and H. Bei. 2008. The development of alumina-forming austenitic stainless steels for high-temperature structural use, JOM 60(7):12-18. Granroth, G., C. Broholm, F. Klose, G. Srajer, Z. Islan, Y. Lee, and J. Lang. 2005. Report from Probing Matter at High Magnetic Fields with X-Rays and Neutrons. Available at http://neutrons.ornl.gov/ workshops/Final_report_2005_Probing%20Matter.pdf. Accessed January 11, 2013. Hulbert, D.M., A. Anders, D. Dudina, D. Jiang, C. Unuvar, U. Anselmi-Tamburini, E. Lavarnia, and A. Mukherjee. 2008. The absence of plasma in “spark plasma sintering.” Journal of Applied Physics 104: 033305. National Research Council. 2004. Accelerating Technology Transition: Bridging the Valley of Death for Materials and Processes. The National Academies Press, Washington, D.C. Wohlers Associates. 2012. Additive Manufacturing and 3D Printing State of the Industry: Annual Worldwide Progress Report. Fort Collins, Colo. 56