Click for next page ( 53

The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement

Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 52
C Workshop Agenda THURSDAY, AUGUST 1, 2013 8:00 a.m. Closed Session Discussion 9:30 Welcome and Introductions Robert Latiff, Workshop Chair 10:20 Break 10:40 Open Discussion on Current Reliance Areas of Interest 12:00 p.m. Lunch 1:00 Additive Manufacturing as a Disruptive Technology Speaker: Kenan Jarboe, President, Athena Alliance 1:20 Q&A 1:40 Low-Volume Manufacturing Operation Using Additive Processes  Speaker: Dale Carlson, General Manager for Technology Strategy, GE Aviation 2:00 Q&A 52

OCR for page 52
Appendix C 53 2:20 Design and Development of Electronics as Controllable, Well- Controlled Processes  Speaker: David H. Johnson, Senior Electronics Failure Analyst, Wright Patterson Air Force Base 2:40 Q&A 3:00 Break 3:20 Reducing Total Lead Time with Quick Response Manufacturing Speaker: Bill Ritchie, President, Tempus Institute 3:40 Q&A 4:00 Discussion 4:40 Adjourn FRIDAY, AUGUST 2, 2013 8:30 a.m. Welcome, What We Heard Yesterday Robert Schafrik, Workshop Vice-Chair 9:00 Exploiting Advanced Computational Resources for Competitive Low-Volume Manufacturing Speaker: Nayanee Gupta, Research Staff, STPI 9:20 Q&A 9:40 Unfinished Business: The 2002 NRC Recommendation on Integrating Commercial and Military Manufacturing  Speaker: Michael McGrath, Vice President for Systems and Operations Analysis, ANSER 10:00 Q&A 10:20 Break 10:40 How to Turn Down the Volume Speaker: Eric Schneider, Mechanical Engineer, Key Tech

OCR for page 52
54 Limited Affordable Low-Volume Manufacturing 11:00 Q&A 11:20 Discussion 12:00 p.m. Lunch 1:00 Wrap-up of Workshop Robert Schafrik, Workshop Vice-Chair 2:00 Adjourn Workshop