Limited Affordable
Low-Volume
Manufacturing
SUMMARY OF A WORKSHOP
Maureen Mellody, Rapporteur
Defense Materials Manufacturing and Infrastructure Standing Committee
National Materials and Manufacturing Board
Division on Engineering and Physical Sciences
NATIONAL RESEARCH COUNCIL
OF THE NATIONAL ACADEMIES
THE NATIONAL ACADEMIES PRESS
Washington, D.C.
THE NATIONAL ACADEMIES PRESS 500 Fifth Street, NW Washington, DC 20001
NOTICE: The project that is the subject of this report was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine.
This study was supported by Contract No. W91lNF-l0-C-0098 between the National Academy of Sciences and the Department of Defense. The views presented in this publication do not necessarily reflect the views of the organizations or agencies that provided support for this project.
International Standard Book Number-13: 978-0-309-30065-0
International Standard Book Number-10: 0-309-30065-7
Cover image: The cover depicts the variability that comes with low-volume manufacturing. Just as no snowflakes are alike, objects can today be manufactured to uniquely fit the desired application with no need for similarity or duplication. Artist: Erik Svedberg, 3D images generated by mathematical formulas where the possibilities are infinite.
This report is available in limited quantities from
National Materials and Manufacturing Board
500 Fifth Street, NW
Washington, DC 20001
nmmb@nas.edu
http://www.nationalacademies.edu/nmmb
Additional copies of this report are available for sale from the National Academies Press, 500 Fifth Street, NW, Keck 360, Washington, DC 20001; (800) 624-6242 or (202) 334-3313; http://www.nap.edu/.
Copyright 2014 by the National Academy of Sciences. All rights reserved.
Printed in the United States of America
THE NATIONAL ACADEMIES
Advisers to the Nation on Science, Engineering, and Medicine
The National Academy of Sciences is a private, nonprofit, self-perpetuating society of distinguished scholars engaged in scientific and engineering research, dedicated to the furtherance of science and technology and to their use for the general welfare. Upon the authority of the charter granted to it by the Congress in 1863, the Academy has a mandate that requires it to advise the federal government on scientific and technical matters. Dr. Ralph J. Cicerone is president of the National Academy of Sciences.
The National Academy of Engineering was established in 1964, under the charter of the National Academy of Sciences, as a parallel organization of outstanding engineers. It is autonomous in its administration and in the selection of its members, sharing with the National Academy of Sciences the responsibility for advising the federal government. The National Academy of Engineering also sponsors engineering programs aimed at meeting national needs, encourages education and research, and recognizes the superior achievements of engineers. Dr. C. D. Mote, Jr., is president of the National Academy of Engineering.
The Institute of Medicine was established in 1970 by the National Academy of Sciences to secure the services of eminent members of appropriate professions in the examination of policy matters pertaining to the health of the public. The Institute acts under the responsibility given to the National Academy of Sciences by its congressional charter to be an adviser to the federal government and, upon its own initiative, to identify issues of medical care, research, and education. Dr. Harvey V. Fineberg is president of the Institute of Medicine.
The National Research Council was organized by the National Academy of Sciences in 1916 to associate the broad community of science and technology with the Academy’s purposes of furthering knowledge and advising the federal government. Functioning in accordance with general policies determined by the Academy, the Council has become the principal operating agency of both the National Academy of Sciences and the National Academy of Engineering in providing services to the government, the public, and the scientific and engineering communities. The Council is administered jointly by both Academies and the Institute of Medicine. Dr. Ralph J. Cicerone and Dr. C. D. Mote, Jr., are chair and vice chair, respectively, of the National Research Council.
This page intentionally left blank.
PLANNING COMMITTEE ON LIMITED AFFORDABLE
LOW-VOLUME MANUFACTURING: A WORKSHOP
ROBERT H. LATIFF, Chair, R. Latiff Associates
ROBERT E. SCHAFRIK, Vice-Chair, GE Aviation
VALERIE BROWNING, ValTech Solutions, LLC
JESUS M. DE LA GARZA, Virginia Polytechnic Institute and State University
ROSARIO A. GERHARDT, Georgia Institute of Technology
MICHAEL F. McGRATH, Analytic Services, Inc. (ANSER)
E. SARAH SLAUGHTER, Built Environment Coalition
DENISE F. SWINK, Independent Consultant
A. GALIP ULSOY, University of Michigan
DEFENSE MATERIALS MANUFACTURING AND
INFRASTRUCTURE STANDING COMMITTEE
ROBERT H. LATIFF, Chair, R. Latiff Associates
ROBERT E. SCHAFRIK, Vice-Chair, GE Aviation
VALERIE BROWNING, ValTech Solutions, LLC
JESUS M. DE LA GARZA, Virginia Polytechnic Institute and State University
GEORGE T. GRAY III, Los Alamos National Laboratory
MICHAEL F. McGRATH, Analytic Services, Inc.
E. SARAH SLAUGHTER, Built Environment Coalition
DENISE F. SWINK, Independent Consultant
A. GALIP ULSOY, University of Michigan
HAYDN N.G. WADLEY, University of Virginia
Staff
DENNIS I. CHAMOT, Acting Director
ERIK B. SVEDBERG, Senior Program Officer
MAUREEN MELLODY, Rapporteur
HEATHER LOZOWSKI, Financial Associate
JOSEPH PALMER, Senior Project Assistant
NATIONAL MATERIALS AND MANUFACTURING BOARD
ROBERT E. SCHAFRIK, NAE, Chair, GE Aviation
PETER R. BRIDENBAUGH, NAE, ALCOA
LAWRENCE D. BURNS, NAE, University of Michigan
JIM C.I. CHANG, National Cheng Kung University
STEPHEN H. DAVIS, Northwestern University
GEORGE T. GRAY, Los Alamos National Laboratory
JENNIE S. HWANG, H-Technologies Group
SUNDARESAN JAYARAMAN, Georgia Institute of Technology
ROBERT H. LATIFF, R. Latiff Associates
MICHAEL F. McGRATH, Analytic Services, Inc.
CELIA MERZBACHER, Semiconductor Research Corporation
EDWARD MORRIS, National Center for Defense Manufacturing and Machining
ROBERT C. PFAHL, JR., International Electronics Manufacturing Initiative
VINCENT J. RUSSO, Aerospace Technologies Associates, LLC
HAYDN N.G. WADLEY, University of Virginia
BEN WANG, Georgia Tech Manufacturing Institute
ALBERT R.C. WESTWOOD, NAE, Sandia National Laboratories (emeritus)
Staff
DENNIS I. CHAMOT, Acting Director
ERIK B. SVEDBERG, Senior Program Officer
HEATHER LOZOWSKI, Financial Associate
JOSEPH PALMER, Senior Project Assistant
This page intentionally left blank.
Acknowledgment of Reviewers
This report has been reviewed in draft form by individuals chosen for their diverse perspectives and technical expertise, in accordance with procedures approved by the National Research Council’s Report Review Committee. The purpose of this independent review is to provide candid and critical comments that will assist the institution in making its published report as sound as possible and to ensure that the report meets institutional standards for objectivity, evidence, and responsiveness to the study charge. The review comments and draft manuscript remain confidential to protect the integrity of the deliberative process. We wish to thank the following individuals for their review of this report:
Robert E. Schafrik (NAE), GE Aviation,
Denise F. Swink, Independent Consultant,
Haydn N.G. Wadley, University of Virginia, and
Albert R.C. Westwood (NAE), Sandia National Laboratories.
Although the reviewers listed above have provided many constructive comments and suggestions, they were not asked to endorse the views presented at the workshop, nor did they see the final draft of the workshop summary before its release. The review of this workshop summary was overseen by David W. Johnson, Jr., Stevens Institute of Technology. Appointed by the NRC, he was responsible for making certain that an independent examination of this workshop summary was carried out in accordance with institutional procedures and that all review comments were carefully considered. Responsibility for the final content of this summary rests entirely with the author and the institution.
This page intentionally left blank.
Contents
Reducing the Cost of Low-Volume Production
Improving the Ease of Low-Volume Manufacturing
The Incorporation of Commercial Off-the-Shelf Technology and Commercial Manufacturing
Process Qualification and Product Certification
Relationship Between Additive Manufacturing and Low-Volume Production
SUMMARY OF WORKSHOP PRESENTATIONS AND DISCUSSIONS
Additive Manufacturing as a Disruptive Technology
Low-Volume Manufacturing Using Additive Processes
Design and Development of Electronics as Controllable, Well-Controlled Processes
Reducing Total Lead Time with Quick Response Manufacturing
Exploiting Advanced Computational Resources for Competitive Low-Volume Manufacturing