National Academies Press: OpenBook
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

THE GLOBAL MOVEMENT AND TRACKING OF

CHEMICAL MANUFACTURING
EQUIPMENT

A WORKSHOP SUMMARY

Kathryn Hughes and Joe Alper, Rapporteurs

Board on Chemical Sciences and Technology

Division on Earth and Life Studies

NATIONAL RESEARCH COUNCIL
OF THE NATIONAL ACADEMIES

THE NATIONAL ACADEMIES PRESS

Washington, D.C.

www.nap.edu

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

THE NATIONAL ACADEMIES PRESS    500 Fifth Street, NW    Washington, DC 20001

NOTICE: The project that is the subject of this report was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine. The members of the committee responsible for the report were chosen for their special competences and with regard for appropriate balance.

This publication results from research supported by the Naval Postgraduate School’s Project on Advanced Systems and Concepts for Countering Weapons of Mass Destruction (PASCC) via Assistance Grant/Agreement No. N00244-13-1-0028 awarded by the NAVSUP Fleet Logistics Center San Diego (NAVSUP FLC San Diego). The views expressed in written materials or publications, and/or made by speakers, moderators, and presenters, do not necessarily reflect the official policies of the Naval Postgraduate School nor does mention of trade names, commercial practices, or organizations imply endorsement by the U.S. Government.

International Standard Book Number-13: 978-0-309-30651-5
International Standard Book Number-10: 0-309-30651-5

Additional copies of this report are available from the National Academies Press, 500 Fifth Street, NW, Keck 360, Washington, DC 20001; (800) 624-6242 or (202) 334-3313; http://www.nap.edu.

Copyright 2014 by the National Academy of Sciences. All rights reserved.

Printed in the United States of America

Cover image (bottom): Courtesy of the Morimatsu Group

Suggested citation: NRC (National Research Council). 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment (A Workshop Summary). Washington, DC: The National Academies Press.

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

THE NATIONAL ACADEMIES

Advisers to the Nation on Science, Engineering, and Medicine

The National Academy of Sciences is a private, nonprofit, self-perpetuating society of distinguished scholars engaged in scientific and engineering research, dedicated to the furtherance of science and technology and to their use for the general welfare. Upon the authority of the charter granted to it by the Congress in 1863, the Academy has a mandate that requires it to advise the federal government on scientific and technical matters. Dr. Ralph J. Cicerone is president of the National Academy of Sciences.

The National Academy of Engineering was established in 1964, under the charter of the National Academy of Sciences, as a parallel organization of outstanding engineers. It is autonomous in its administration and in the selection of its members, sharing with the National Academy of Sciences the responsibility for advising the federal government. The National Academy of Engineering also sponsors engineering programs aimed at meeting national needs, encourages education and research, and recognizes the superior achievements of engineers. Dr. C. D. Mote, Jr., is president of the National Academy of Engineering.

The Institute of Medicine was established in 1970 by the National Academy of Sciences to secure the services of eminent members of appropriate professions in the examination of policy matters pertaining to the health of the public. The Institute acts under the responsibility given to the National Academy of Sciences by its congressional charter to be an adviser to the federal government and, upon its own initiative, to identify issues of medical care, research, and education. Dr. Victor J. Dzau is president of the Institute of Medicine.

The National Research Council was organized by the National Academy of Sciences in 1916 to associate the broad community of science and technology with the Academy’s purposes of furthering knowledge and advising the federal government. Functioning in accordance with general policies determined by the Academy, the Council has become the principal operating agency of both the National Academy of Sciences and the National Academy of Engineering in providing services to the government, the public, and the scientific and engineering communities. The Council is administered jointly by both Academies and the Institute of Medicine. Dr. Ralph J. Cicerone and Dr. C. D. Mote, Jr., are chair and vice chair, respectively, of the National Research Council.

www.national-academies.org

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

This page intentionally left blank.

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

BOARD ON CHEMICAL SCIENCES AND TECHNOLOGY

TIMOTHY SWAGER, (Co-Chair), NAS, Massachusetts Institute of Technology, Cambridge

DAVID WALT, (Co-Chair), NAE, Tufts University, Medford, Massachusetts

HÉCTOR D. ABRUÑA, Cornell University, Ithaca, New York

JOEL C. BARRISH, Bristol-Myers Squibb, Princeton, New Jersey

MARK A. BARTEAU, NAE, University of Michigan, Ann Arbor

DAVID BEM, The Dow Chemical Company, Philadelphia, PA

ROBERT G. BERGMAN, NAS, University of California, Berkeley

JOAN BRENNECKE, NAE, University of Notre Dame, Indiana

HENRY E. BRYNDZA, E. I. du Pont de Nemours & Company, Wilmington, Delaware

MICHELLE V. BUCHANAN, Oak Ridge National Laboratory, Oak Ridge, Tennessee

DAVID W. CHRISTIANSON, University of Pennsylvania, Philadelphia

RICHARD EISENBERG, NAS, University of Rochester, New York

JILL HRUBY, Sandia National Laboratories, Albuquerque, New Mexico

FRANCES S. LIGLER, NAE, University of North Carolina at Chapel Hill and North Carolina State University, Raleigh

SANDER G. MILLS, Merck Research Laboratories (Ret.), Scotch Plains, New Jersey

JOSEPH B. POWELL, Shell, Houston, Texas

ROBERT E. ROBERTS, Institute for Defense Analyses, Alexandria, Virginia

PETER J. ROSSKY, NAS, Rice University, Houston, Texas

DARLENE SOLOMON, Agilent Technologies, Santa Clara, California

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

ORGANIZING COMMITTEE ON THE GLOBAL MOVEMENT AND TRACKING OF CHEMICAL MANUFACTURING EQUIPMENT

NANCY B. JACKSON, Franklin Fellow, U.S. Department of State

ROBERT E. ROBERTS, Senior Scientist, Institute of Defense Analyses

USHA WRIGHT, Senior Vice President and Co-General Counsel, O’Brien & Gere

CLARA J. ZAHRADNIK, Export Control Leader, E. I. du Pont de Nemours & Company

NATIONAL RESEARCH COUNCIL STAFF

TERESA FRYBERGER, Director

KATHRYN HUGHES, Senior Program Officer

DOUGLAS FRIEDMAN, Senior Program Officer

CARL GUSTAV-ANDERSON, Research Associate

ELIZABETH FINKELMAN, Program Coordinator

NAWINA MATSHONA, Senior Program Assistant

COTILYA BROWN, Senior Program Assistant

CAMLY TRAN, Postdoctoral Fellow

JOE ALPER, Consulting Writer

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

Acknowledgment of Reviewers

This workshop summary has been reviewed in draft form by persons chosen for their diverse perspectives and technical expertise in accordance with procedures approved by the National Research Council’s Report Review Committee. The purpose of this independent review is to provide candid and critical comments that will assist the institution in making the published workshop summary as sound as possible and to ensure that it meets institutional standards of objectivity, evidence, and responsiveness to the study charge. The review comments and draft manuscript remain confidential to protect the integrity of the deliberative process. We wish to thank the following individuals for their review of this summary:

Paul Amyotte, Dalhousie University

Richard T. Cupitt, U.S. Department of State

Charles T. Mooney, Xylem, Inc.

Donald Prosnitz, Independent Consultant

Although the reviewers listed above provided many constructive comments and suggestions, they did not see the final draft of the workshop summary before its release. The review of this summary was overseen by the National Research Council, which is responsible for making certain that an independent examination of this workshop summary was carried out in accordance with institutional procedures and that all review comments were carefully considered.

Page viii Cite
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

This page intentionally left blank.

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

Acronyms and Abbreviations

ASME American Society of Mechanical Engineers
 
BCST Board on Chemical Sciences and Technology
 
CEFIC European Chemical Industry Council (Conseil Européen des Fédérations de l’Industrie Chimique)
CWC Chemical Weapons Convention
 
DOC discrete organic chemical
 
EAR Export Administration Regulations
eLVIS eBay Listing Violation Identification System
 
ISO International Organization for Standardization
ITAR International Traffic in Arms Regulations
 
NCIS Naval Criminal Investigative Service
NRC National Research Council
 
OCPF Other Chemical Production Facilities
OPCW Organisation for the Prohibition of Chemical Weapons
 
PASCC Project on Advanced Systems and Concepts for Countering Weapons of Mass Destruction
 
UNSCR United Nations Security Council Resolution
 
WCO World Customs Organization
WMD Weapons of Mass Destruction
WTO World Trade Organization
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×

This page intentionally left blank.

Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R1
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R2
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R3
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R4
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R5
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R6
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R7
Page viii Cite
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R8
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R9
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R10
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R11
Suggested Citation:"Front Matter." National Research Council. 2014. The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/18820.
×
Page R12
Next: 1 Introduction and Overview »
The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary Get This Book
×
 The Global Movement and Tracking of Chemical Manufacturing Equipment: A Workshop Summary
Buy Paperback | $40.00 Buy Ebook | $32.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Dual-use applications for chemical manufacturing equipment have been recognized as a concern for many years, and export-control regulations worldwide are in place as a result. These regulations, in conjunction with the verification and inspection requirements of Article VI of the Chemical Weapons Convention, are designed to support non-proliferation of manufacturing equipment suitable for production of chemical warfare agents. In recent years, globalization has changed the distribution of chemical manufacturing facilities around the world. This has increased the burden on current inspection regimes, and increased the amount of manufacturing equipment available around the world. Movement of that equipment, both domestically and as part of international trade, has increased to accommodate these market shifts.

To better understand the movement and tracking of chemical manufacturing equipment of dual-use concern, the Project on Advanced Systems and Concepts for Countering Weapons of Mass Destruction at the Naval Postgraduate School contracted with the Board on Chemical Sciences and Technology of the National Research Council to hold a workshop on the global movement and tracking of chemical manufacturing equipment. The workshop, held in May 2014, looked at key concerns regarding the availability and movement of equipment for chemical manufacturing, particularly used and decommissioned equipment that is of potential dual-use concern. The workshop examined today's industrial, security, and political contexts in which these materials are being produced, regulated, and transferred. The workshop also facilitated discussions about current practices, including consideration of their congruence with current technologies and security threats in the global chemical industrial system. The Global Movement and Tracking of Chemical Manufacturing Equipment summarizes the presentations and discussion of the event.

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!