National Academies Press: OpenBook
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

DISPELLING THE MANUFACTURING MYTH

American Factories Can Compete in the Global Marketplace

Committee on Comparative Cost Factors and Structures in Global Manufacturing

Manufacturing Studies Board

National Research Council

NATIONAL ACADEMY PRESS
Washington, D.C. 1992

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

National Academy Press
2101 Constitution Ave., N.W. Washington, D.C. 20418

NOTICE: The project that is the subject of this report was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine. The members of the committee responsible for the report were chosen for their special competences and with regard for appropriate balance.

This report has been reviewed by a group other than the authors according to procedures approved by a Report Review Committee consisting of members of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine.

This work is related to Department of the Navy Grant N00014-85-J-0094 issued by the Office of Naval Research. The United States government has a royalty-free license throughout the world on all copyrightable material contained therein.

Library of Congress Cataloging-in-Publication Data

Dispelling the manufacturing myth: American factories can compete in the global marketplace / Committee on Comparative Cost Factors and Structures in Global Manufacturing, Manufacturing Studies Board, National Research Council.

p. cm.

"May 23, 1992."

Includes bibliographical references and index.

ISBN 0-309-04676-9

1. United States—Manufactures. 2. Competition, International. I. National Research Council (U.S.). Committee on Comparative Cost Factors and Structures in Global Manufacturing.

HD9725.D57 1992

338.6'048'0973—dc20 92-21775

CIP

Copyright 1992 by the National Academy of Sciences. All rights reserved.

Printed in the United States of America

First Printing, September 1992

Second Printing, October 1995

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

COMMITTEE ON COMPARATIVE COST FACTORS AND STRUCTURES IN GLOBAL MANUFACTURING

LAURENCE C. SEIFERT (Chairman), Vice President,

Global Manufacturing and Engineering, AT&T, Morristown, New Jersey

JAMES D. BERCAW, Manufacturing Vice President,

Consumer Products, AT&T, Parsippany, New Jersey

FRED C. BUHLER, Vice President,

Corporate Development, Kellogg Company, Battle Creek, Michigan

KIM B. CLARK, Harry E. Figgie, Jr., Professor of Business Administration,

Harvard Business School, Harvard University, Boston, Massachusetts

WILLIAM F. FOWBLE, Group Vice President and General Manager,

Photographic Products, Eastman Kodak Company, Rochester, New York

WILLIAM C. HANSON, Vice President of Logistics,

Digital Equipment Corporation, Maynard, Massachusetts

LAURENCE W. HECHT, President,

Iacocca Institute, Lehigh University, Bethlehem, Pennsylvania

ROGER N. NAGEL, Harvey Wagner Professor of Manufacturing Systems Engineering,

Computer Science, and Electrical Engineering, Lehigh University, Bethlehem, Pennsylvania

THOMAS M. WOODARD, Director,

McKinsey and Company, Inc., New York, New York

Staff

VERNA J. BOWEN, Staff Assistant

THOMAS C. MAHONEY, Director

MICHAEL L. WITMORE, Research Assistant (until June 1991)

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

MANUFACTURING STUDIES BOARD

JAMES F. LARDNER (Chairman), Vice President,

Component Group, Deere & Company (Retired), Davenport, Iowa

STEVEN J. BOMBA, Vice President of Technology,

Johnson Controls, Inc., Milwaukee, Wisconsin

BRIAN E. BOYER, Vice President of Operations,

Northrop Aircraft Division, Hawthorne, California

GARY L. COWGER, Executive Director,

Advanced Manufacturing Engineering, General Motors Corporation, Warren, Michigan

CHARLES P. FLETCHER, Vice President of Engineering,

Aluminum Company of America (Retired), Allison Park, Pennsylvania

THOMAS G. GUNN, President,

Gunn Associates, Inc., Bryn Mawr, Pennsylvania

GEORGE J. HESS, Vice President of Systems and Planning,

The Ingersoll Milling Machine Company, Rockford, Illinois

CHARLES W. HOOVER, JR., Professor,

Department of Industrial and Mechanical Engineering, Polytechnic University, Brooklyn, New York

RAMCHANDRAN JAIKUMAR, Professor,

Harvard Business School, Harvard University, Boston, Massachusetts

J. B. JONES, Randolph Professor Emeritus,

Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg

DONALD KENNEDY, Educational Representative,

International Association of Machinists and Aerospace Workers, Hollywood, Maryland

JOE H. MIZE, Regents Professor,

School of Industrial Engineering and Management, Oklahoma State University, Stillwater

LAURENCE C. SEIFERT, Vice President,

Global Manufacturing and Engineering, AT&T, Morristown, New Jersey

JOHN M. STEWART, Director,

McKinsey and Company, Inc., New York, New York

HERBERT B. VOELCKER, Charles Lake Professor of Engineering,

Sibley School of Mechanical Engineering, Cornell University, Ithaca, New York

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

PAUL K. WRIGHT, Professor,

Department of Mechanical Engineering, University of California, Berkeley

Staff

VERNA J. BOWEN, Staff Assistant

DANA G. CAINES, Staff Associate

LUCY V. FUSCO, Staff Assistant

THEODORE W. JONES, Research Associate

THOMAS C. MAHONEY, Director

W. L. (LARRY) OTTO, JR., Study Director,

Unit Manufacturing Process Research Committee

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

The National Academy of Sciences is a private, nonprofit, self-perpetuating society of distinguished scholars engaged in scientific and engineering research, dedicated to the furtherance of science and technology and to their use for the general welfare. Upon the authority of the charter granted to it by the Congress in 1863, the Academy has a mandate that requires it to advise the federal government on scientific and technical matters. Dr. Frank Press is president of the National Academy of Sciences.

The National Academy of Engineering was established in 1964, under the charter of the National Academy of Sciences, as a parallel organization of outstanding engineers. It is autonomous in its administration and in the selection of its members, sharing with the National Academy of Sciences the responsibility for advising the federal government. The National Academy of Engineering also sponsors engineering programs aimed at meeting national needs, encourages education and research, and recognizes the superior achievements of engineers. Dr. Robert M. White is president of the National Academy of Engineering.

The Institute of Medicine was established in 1970 by the National Academy of Sciences to secure the services of eminent members of appropriate professions in the examination of policy matters pertaining to the health of the public. The Institute acts under the responsibility given to the National Academy of Sciences by its congressional charter to be an adviser to the federal government and, upon its own initiative, to identify issues of medical care, research, and education. Dr. Kenneth I. Shine is president of the Institute of Medicine.

The National Research Council was organized by the National Academy of Sciences in 1916 to associate the broad community of science and technology with the Academy's purposes of furthering knowledge and advising the federal government. Functioning in accordance with general policies determined by the Academy, the Council has become the principal operating agency of both the National Academy of Sciences and the National Academy of Engineering in providing services to the government, the public, and the scientific and engineering communities. The Council is administered jointly by both Academies and the Institute of Medicine. Dr. Frank Press and Dr. Robert M. White are chairman and vice chairman, respectively, of the National Research Council.

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

Acknowledgments

Over the course of the study, the committee received input from a wide variety of sources. We would like to express our gratitude to all the individuals who briefed us on conditions in their industries. From the consumer electronics industry, we heard from Gordon Bricker of RCA, Wayne Garret of Thomson Consumer Electronics, and Kinichi Kadono of Toshiba. On the complexities of semiconductor manufacturing, Richard Dehmel of Sematech, Dean Toombs of Intel, and William Howard were very helpful. Finally, from the automobile industry, we thank George Eads of General Motors.

Two individuals deserve special recognition. Vernon Dyke, Vice President and General Manager, Kodak Park, Eastman Kodak, and Walter Bonin, Manufacturing Planning Manager for Digital Services, Digital Equipment Corporation, provided valuable insight into the decision-making process in their industries and companies. Their experience, knowledge, and hard work were critical assets in the committee's deliberations.

Finally, the committee acknowledges the work of the staff of the Manufacturing Studies Board. This report would not have been possible without the hard work and patience of Tom Mahoney, Mike Witmore, Ted Jones, and Verna Bowen.

Page viii Cite
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
This page in the original is blank.
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

Preface

The Committee on Comparative Cost Factors and Structures in Global Manufacturing began its deliberations in the fall of 1989. With the generous support of the U.S. Department of Defense, the committee undertook an examination of manufacturing costs in domestic and offshore factories to provide insight into the factory location decision-making process. There was at the time, and continues to be, considerable discussion of the concept of a "level playing field" in international trade—that is, the idea that foreign manufacturers and offshore factories have inherent cost advantages relative to U.S. manufacturers for a number of reasons: not only are labor costs lower, but factors such as health benefits, pensions, environmental compliance, and liability insurance pose far less of a burden to foreign manufacturers than they do to their U.S. counterparts. The committee's objective was to review these various costs in a number of industries that face strong foreign competition to determine the extent to which different cost factors and structures in different locations affect manufacturing costs.

Such an objective proved to be too ambitious. Information on production costs simply is not available on a sufficiently disaggregated basis to perform the broad-based analysis intended by the committee. Consequently, the committee relied heavily on the data that were available and focused on the factors that determine factory site location decisions. Its analy-

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

sis of international cost differentials in consumer electronics is based on internal corporate data provided by AT&T and Toshiba. The committee's examinations of the semiconductor and automobile industries are based more on the committee's experiences in and knowledge of those industries than on actual cost data, which were not available. Because little actual cost data were available from these industries, these analyses describe the factors that determine manufacturing efficiency and factors other than cost, such as trade barriers and local content requirements, which often determine where production is done.

In all the industries examined, the committee found that, with effective management of the total manufacturing system, manufacturing in the United States can be cost competitive with offshore production and, further, can provide significant advantages in staying abreast of and responding rapidly to changing customer demands. The committee recognizes, however, that other factors besides cost drive site selection decisions and that globally dispersed production facilities offer U.S. manufacturers advantages in learning new practices, gaining access to new technologies, and responding to foreign customers effectively.

In Chapter 4 the committee describes a decision model that captures its findings in a general context. Many factors determine the attractiveness of different countries for manufacturing. They range from external factors such as exchange rates, trade barriers, and government subsidies to internal variables such as the labor intensity of the manufacturing process, location of suppliers, and relations with the firm's other plants. Site selection becomes a complex decision, typically unique in each case. Both managers and government policymakers need to recognize this complexity and strive to make the United States an effective base for manufacturing.

Laurence C. Seifert, Chairman

Committee on Comparative Cost Factors and Structures in Global Manufacturing

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page xiii Cite
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×

DISPELLING THE MANUFACTURING MYTH

Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
This page in the original is blank.
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R1
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R2
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R3
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R4
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R5
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R6
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R7
Page viii Cite
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R8
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R9
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R10
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R11
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R12
Page xiii Cite
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R13
Suggested Citation:"FRONT MATTER." National Research Council. 1992. Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace. Washington, DC: The National Academies Press. doi: 10.17226/1890.
×
Page R14
Next: EXECUTIVE SUMMARY »
Dispelling the Manufacturing Myth: American Factories Can Compete in the Global Marketplace Get This Book
×
Buy Paperback | $45.00
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Conventional wisdom holds that high wages, high capital costs, and worker inflexibility have cost America its ability to compete in the world manufacturing marketplace. This book demonstrates that U.S.-based manufacturing can compete in terms of quality, product features, and timely delivery—the real measures of competitiveness in the 1990s.

The committee identifies attributes that attract manufacturers to given locations and assesses the attractiveness of the United States as a location for different kinds of manufacturing. The volume dispels myths that have guided management decision making in the past and offers recommendations to promote the United States as a manufacturing site.

The volume discusses new approaches to understanding and controlling costs. With case studies from three important industries—consumer electronics, semiconductors, and automobiles—the book explores factors in site location decisions, highlighting advantages the United States can offer as a manufacturing site over low-cost rivals.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!