Click for next page ( 248


The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement



Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 247
APPENDIX B CONFERENCE PARTICIPANTS AND SPEAKERS PARTICIPANTS Fred Arnold, Federal Aviation Administration, Atlantic City, New Jersey Joni Arnold, Federal Aviation Administration, Atlantic City, New Jersey Steven Beare, Senior Research Associate, DuPont Advanced Fibers System, Wilmington, Delaware Robert Buch. Senior Research Specialist. Dow Corning Corporation, Auburn, Michigan Gary T. Burns, Associate Research Specialist, Dow Corning Corporation, Midland, Michigan Kathyrn M. Butler, Physicist, National Institute of Standards and Technology, Ga~thersburg, Maryland Daniel Caldwell, U.S. Army Medical Research and Development Command, Tri-Service Toxicology, Wr~ght-Patterson Air Force Base, Ohio Donald R. Cardis, President and CEO, Schneller, Inc., Kent, Ohio George I. Danker, Vice President - Chief Technical Officer, Akro Fireguard Products, Lenexa, Kansas Richard G. Gann, Chief, Fire Science Division, National Institute of Standards and Technology, Gaithersburg, Maryland Jeffrey W. GiNnan, Research Chemist, National Institute of Standards and Technology, Gaithersburg, Maryland Peter S. Guard, Manager, BCAG Color and Matenal, Boeing Commercial Airplane Group, Issaquah, Washington Marcelo H~rschIer, Safety Engineering Laboratories, Rocky River, Ohio Theo Klems, Senior Engineer, Airbus Industries, Blagnac Cedex, France 247

OCR for page 247
248 Conference on Fire arm Smoke Resistant Materials Sheldon Lapan, Research Epidemiologist, Maryland Center for the Study of the Health Effects of Fire, Baltimore, Maryland Menachem Lenin, Professor, Polymer Research Institute, Polytechnic University, Brooklyn, New York Nelson Miner, Director, Aircraft Safety, Federal Aviation Administration, Atlantic City, New Jersey Vahid Motevalli, Visiting Professor, George Washington University, Washington, D.C. Dennis NoNen, DuPont Advanced Materials Systems, Newark, Delaware Michael O'Donnell, Tech SIs. Manager, Imi-Tech Corporation, Mt. Vernon, Washington Thomas J. Ohiemiller, Chemical Engineer, National Institute of Standards and Technology, Gaithersburg, Maryland Dale G. Onderak, Vice President, Research and Development Tech Service, Schneller, Inc., Kent, Ohio Mile Raub, Manager, Systems and Interiors Engineering, Trans World Airways, Kansas City, Missouri John A. Rock, Staff Scientist, Amoco Polymers, Alpharetta, Georgia Henry I. Roux, President, Roux International, Inc., Lancaster, Pennsylvania Kelley Scott, Analyst, U.S. Congress, Office of Technology Assessment, Washington, D.C. Stephanie Skaggs, Deputy Director, Center for Global Environmental Technologies, New Mexico Engineering Research Institute, Albuquerque, New Mexico Joseph R. Soderquist, Chief Scientific/Tech Advisor, Federal Aviation Administration, Washington, D.C. Martin Spencer, Heath Tecna Aerospace Company, Bellingham, Washington Guiliana Tesoro, Research Professor, Polytechnic University, Brooklyn, New York Allan Van Buskirk, Research Chemist, General Plastics Manufacturing Company, Tacoma, Washington William F. Wellner, Development Manager, M.C. Gill Corporation, E1 Monte, California

OCR for page 247
Appendix B 249 Bob Williams, Interior Systems Engineer, Delta Air Lines, Atlanta, Georgia Mike Williams, Group Leader Manager, Interior Design for McDonnell Douglas, Long Beach, California Chuck Williamson, QA Manager, General Plastics Manufacturing Company, Tacoma, Washington SPEAKERS Hans Dieter Berg, Deutche Aerospace Airbus, Bremen, Germany Hanns-Ioerg Betz, Lufthansa German Airlines, Frankfurt, Germany Dougal D. Drysdale, University of Edinburgh, Edinburgh, Scotland Sally A. Hasselbrack, Boeing Commercial Airplane Group, Seattle, Washington Paul Hergenrother, National Aeronautics and Space Administration, Langley Research Center, Hampton, Virginia Thomas E. McSweeny, Aircraft Certification Service, Federal Aviation Administration, Washington, D.C. Thomas M. Murray, Boeing Commercial Airplane Group, Seattle, Washington David Purser, Fire Research Station, Watford, United Kingdom James G. Quintiere, University of Maryland, College Park, Maryland Constantine P. Sarkos, Fire Safety Branch, Federal Aviation Administration, Atlantic City, New Jersey Swen J. Schaich, Deutche Aerospace Airbus, Hamburg, Germany Usman Sorathia, Naval Surface Warfare Center, Annapolis, Maryland Archie Tewarson, Factory Mutual Research Corporation, Norwood, Massachusetts Edward D. Weil, Polytechnic University of New York, Polymer Research Institute, Brooklyn

OCR for page 247
250 Conference on Fire aM Smoke Resistant Materials Charles A. Wilkie, Marquette University, Milwaukee, Wisconsin Marte! Zeldin, City University of New York, Staten Island, New York

OCR for page 247