National Academies Press: OpenBook

Materials for High-Temperature Semiconductor Devices (1995)

Chapter: Appendix D: Biographical Sketches of Committee Members

« Previous: Appendix C: High-Temperature Microwave Devices
Suggested Citation:"Appendix D: Biographical Sketches of Committee Members." National Research Council. 1995. Materials for High-Temperature Semiconductor Devices. Washington, DC: The National Academies Press. doi: 10.17226/5023.
×
Page 119
Suggested Citation:"Appendix D: Biographical Sketches of Committee Members." National Research Council. 1995. Materials for High-Temperature Semiconductor Devices. Washington, DC: The National Academies Press. doi: 10.17226/5023.
×
Page 120

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Appendix D: Biographical Sketches of Committee Members WOLFGANG J. CHOYKE has been a professor in the Department of Physics at the University of Pittsburgh since 1988. He spent the previous 36 years at the Westinghouse Research Laboratories. He received a B.Sc. and a Ph.D. from Ohio State University. MICHAEL G. ADLERSTEIN is a principal scientist at the Raytheon Research Division. He received a B.S. and an M.S. from the Polytechnic Institute of Brooklyn and a Ph.D. in applied physics from Harvard University. JEROME J. CUOMO has been a professor in the Department of Materials Science and Engineering at North Carolina State University since 1993. He was previously senior manager at IBM's Materials Laboratory Center for Science and Services. He received a B.S. from Manhattan College, an M.S. in physical chemistry from St. Johns University, and a Ph.D. in physics from Odense University in Denmark. He is a member of the National Academy of Engineering. ARTHUR G. FOYT, Jet., is manager of Electronics Research at the United Technologies Research Center. He received a B.S., an M.S., and a Sc.D. in electrical engineering from the Massachusetts Institute of Technology. EVELYN L. HU is professor and chair of the Deparment of Electrical and Computer Engineering at the University of California, Santa Barbara. She received a 119 B.A. from Barnard College and an M.A. and a Ph.D. in physics from Columbia University. LIONEL C. KIMERLING has been a professor in the Department of Materials Science and Engineering at the Massachusetts Institute of Technology since 1991. He spent the previous 10 years as head of the Materials Physics Research Department at Bell Laboratories. He received an S.B. and a Ph.D. from the Massachusetts Institute of Technology. He is also a member of the National Materials Advisory Board. MARK R. PINTO is department head of ULSI at AT&T Bell Laboratories. He received a B.S. in electrical engineering and computer science from Rensselaer Polytechnic Institute and an M.S. and a Ph.D. in electrical engineering from Stanford University. MICHAEL A. TAMOR is staff scientist in the physics department and group leader of the Diamond Film Project at Ford Motor Company. He received a B.S. from the University of California, Los Angeles, and an M.S. and a Ph.D. in physics from the University of Illinois, Urbana. IWONA TURLIK is vice-president and director of Motorola's Corporate Manufacturing Research Center. She received an M.S. in electrical engineering and a Ph.D. in technical sciences from the Technical University of Wroclaw, Poland.

Materials for High-Temperature Semiconductor Devices Get This Book
×
 Materials for High-Temperature Semiconductor Devices
Buy Paperback | $46.00 Buy Ebook | $36.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Major benefits to system architecture would result if cooling systems for components could be eliminated without compromising performance. This book surveys the state-of-the-art for the three major wide bandgap materials (silicon carbide, nitrides, and diamond), assesses the national and international efforts to develop these materials, identifies the technical barriers to their development and manufacture, determines the criteria for successfully packaging and integrating these devices into existing systems, and recommends future research priorities.

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!