National Academies Press: OpenBook
« Previous: 8 LONG-TERM OPPORTUNITIES AND INNOVATIVE SYSTEMS
Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×

References

American Ceramic Society Bulletin. 1996. Technology Briefs—Nanoparticles strengthen monolithic ceramics. American Ceramic Society Bulletin 75(1):21.


Backman, D.A., and J.C. Williams. 1992. Advanced materials for aircraft engine applications. Science 255:10821087.

Bernstein, H.L. 1990. Life management system for General Electric Frame 7E gas turbine. Pp. 111-118 in Life Assessment and Repair Technology for Combustion Turbine Hot Section Components, R. Viswanathan and J.M. Allen, eds. Materials Park, Ohio: ASM International.

Biehler, D.I. 1987. Thick thermal barrier coatings for diesel engine components. Paper presented at the 1987 Proceedings of the Workshop on Coatings for Advanced Heat Engines, Castine, Maine, July 27-30. Washington D.C.: U.S. Department of Energy.

Bose, S., and J. DeMasi-Marcin. 1995. Thermal barrier coating experience in gas turbine engines at Pratt & Whitney. Pp. 63-77 in Thermal Barrier Coating Workshop. NASACP-3312. Cleveland, Ohio. National Aeronautics and Space Administration Lewis Research Center.

Boyle, R.J., and K.C. Civinskas. 1991. Two-Dimensional Navier-Stokes Heat Transfer for Rough Turbine Blades. NASA-TM-106008. Washington, D.C. : National Aeronautics and Space Administration.

Boynton, J.L., R. Tabibzadeh, and S.T. Hudson. 1992. Investigation of Rotor Blade Roughness Effects on Turbine Performance. ASME Paper 92-GT-297. New York: American Society of Mechanical Engineers.

Brewer, L. 1990. Nature of bonding in transition-metal aluminides. Journal of Physical Chemistry 94:1196-1203.

Brewer, L., and P.R. Wengert. 1973. Transition metal alloys of extraordinary stability: an example of generalized Lewis-acid-base interactions in metallic systems. Metallurgical Transactions 4:83-104.

Brindley, W.J. 1995. Properties of plasma sprayed bond coats. Pp. 189-202 in the Proceedings of the Workshop on Thermal Barrier Coating. NASA-CP-3312. Cleveland, Ohio: National Aeronautics and Space Administration Lewis Research Center.

Brindley, W.J., and J.A. Nesbitt. 1988. Advanced Earth to Orbit Propulsion Technology, Vol. 1. NASA-CP-3012. Washington, D.C.: National Aeronautics and Space Administration.

Brindley, W.J., and J.D. Whittenberger. 1993. Stress relaxation of low pressure plasma-sprayed NiCrAlY alloys. Materials Science and Engineering A 163(1):33-41.

Brindley, W.J., J.L. Smialek, and M.A. Gedwill. 1992. Oxidation resistant coatings for Ti3Al+Nb and SiC/Ti3Al+Nb. Pp. 41-1 to 41-15 in SITEMAP Review 1992, Vol. 2. NASA-CP-10104. Washington, D.C.: National Aeronautics and Space Administration.

Bunch, REF., ed. 1982. Deposition Technologies for Films and Coatings. Park Ridge, New Jersey: Noes.


Caccavale, C., and W. Sikkenga. 1994. Investment Casting using Core with Integral Wall Thickness Control Means. U.S. Patent, Number 5,296,308.

Cockeram, BV, G. Wang, and RA Rapp. 1995. Growth kinetics and pesting resistance of MoSi2 and Ge-doped MoSi2 diffusion coatings. Werkstoffe und Korrosion 46(4):207-217.

Cotton, F.A., and G. Wilkinson. 1988. Advanced Inorganic Chemistry, 5th ed. New York: John Wiley & Sons.

CRC. 1985. CRC Handbook of Chemistry and Physics, 66th ed, R.C. Weast, M.J. Astle, and W.H. Beyer, eds. Boca Raton, Florida: CRC Press.

Cruse, T.A., B.P. Johnsen, R.A. Miller, and W.J. Brindley. 1992. A presentation on thermal barrier coatings. Pp. 41-47 in the Proceedings of the 1992 Workshop on Coatings for Advanced Heat Engines, Vol. 2. Monterey, California, August 3-6. Washington, D.C.: U.S. Department of Energy.


DeMasi, J.T., K.D. Sheffler, and M. Ortiz. 1989. Thermal Barrier Coating Life Prediction Model Development Phase I, Final Report. NASA-CR-182230. Washington, D.C.: National Aeronautics and Space Administration.

DeMasi-Marcin, J.T., K.D. Sheffler, and S. Bose. 1989. Mechanisms of Degradation and Failure in a Plasma Deposited Thermal Barrier Coating. ASME Paper 89-GT-132. New York: American Society of Mechanical Engineers.

Dias, A.G., J.H. van Breda, P. Moretto, and J. Ordelman. 1995. Development of TiN-Si3N4 nano composite coatings for wear resistance applications. Journal De Physique IV 5:831.

Dimiduk, D.M., D.B. Miracle, and C.H. Ward. 1992. Overview development of intermetallic materials for aerospace systems. Materials Science and Technology 8(4):367.

Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×

DOE (U.S. Department of Energy). 1992a. Clean Coal Technology Research, Development, and Demonstration: Program Plan. DOE/FE-0284. Washington, D.C.: DOE.

DOE. 1992b. Comprehensive Program Plan for Advanced Turbine Systems. DOE/FE-0279. Washington, D.C.: DOE.

Dowding, R.J., and S. Malghan. 1995. Key issues discussed at the Nanophase Materials Processing Workshop. Materials Technology 10(9/10):95.

Doychak, J. 1994. Oxidation behavior of high-temperature intermetallics. Pp. 977-1016 in Intermetallic Compounds, Chapter 43, Vol. 1, J.H. Westbrook and R.L. Fleischer, eds. New York: John Wiley & Sons.

Duvall, D.S., and D.L. Ruckle. 1982. Ceramic thermal barrier coatings for turbine engine components. In paper presented at the 27th International Gas Turbine Conference and Exhibit, London, April 18-22. ASME 82-GT-322. New York: American Society of Mechanical Engineers.

Dyson, O.B. 1989. Modeling creep properties of coated superalloys in aggressive environments. Materials Science and Engineering 645(11-12):A120-121.

Eaton, H.E., and R.C. Novak. 1987. Sintering studies of plasma-sprayed zirconia . Surface and Coatings Technology 32:227-236.

EPRI (Electric Power Research Institute). 1991. Guidebook and Software for Specifying High-Temperature Coatings for Combustion Turbines. EPRI GS-7334-L. Palo Alto, California: EPRI.

Evans, A.G., G.B. Crumley, and R.E. Demaray. 1983. On the mechanical-behavior of brittle coatings and layers. Oxidation of Metals 20(5/6): 193-216.


Ferguson, B.L., G.J. Petrus, and M. Ordillas. 1994. A Software Tool to Design Thermal Barrier Coatings. Final Report. NASA Contract NAS3-2728. Washington, D.C.: National Aeronautics and Space Administration.

Fox, D.S. 1992. Environmental durability of ceramics and ceramic composites. Pp. 165-175 in Flight-Vehicle Materials, Structures and Dynamics-Assessment and Future Directions, Vol. 3, S.R. Levine, ed. New York: American Society of Mechanical Engineers.


Gabb, T.P., and R.L. Dreshfield. 1986. Superalloys data. Appendix B in Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds. New York: John Wiley & Sons.

Gell, M., D.N. Duhl, D.K. Gupta, and K.D. Sheffler. 1987. Advanced superalloy airfoils. Journal of Metals 39(7): 11-15.

Gibson, J.K., and P.R. Wengert. 1984. Gibbs free energies of formation for intermetallic compounds involving transition elements, lanthanides, and actinides. High Temperature Science 17:371-378.

Glassman, A.J. 1975. Turbine Design and Application, Vol. 3. NASA-SP-290-VOL-3. Cleveland, Ohio.: National Aeronautics and Space Administration Lewis Research Center.

Goward, G.W. 1987. Seventeen years of thermal barrier coatings. Paper presented at the 1987 Proceedings of the Workshop on Coatings for Advanced Heat Engines, Castine, Maine, July 27-30. Washington D.C.: U.S. Department of Energy.

Goward, G.W., and L.W. Cannon. 1988. Pack Cementation Coatings for SuperalloysHistory, Theory and Practice. ASME Paper 87-GT-50. New York: American Society of Mechanical Engineers.

Gupta, D.K, and D.S. Duvall. 1984. A Silicon and Hafnium Modified Plasma Sprayed MCrAlY Coating for Single Crystal Superalloys. Warrendale, Pennsylvania: The Materials Society.


Haafkens, M.H. 1982. Experiences in repair of hot section gas turbine components. SAE 821490. In paper presented at the Society of Automotive Engineers, Aerospace Congress and Exposition, Anaheim, California, October 25-28 . Warrendale, Pennsylvania: Society of Automotive Engineers.

Hillery, R.V., B.H. Pilsner, R.L. McKnight, T.S. Cook, and M.S. Hartle. 1988. Thermal Barrier Coating Life Prediction Model Development. Final Report. NASA-CR180807. Washington, D.C.: National Aeronautics and Space Administration.

Hsu, L.L. 1987. Total corrosion control for industrial gas turbines: high temperature coatings and air, fuel and water management. Pp. 1-17 in the Proceedings of the 14th International Conference on Metallurgical Coatings, San Diego, California, March 23-27. Washington, D.C.: National Aeronautics and Space Administration.

Hsu, L.L. 1988. Total corrosion control for industrial gas turbines: air borne contaminants their impact on air/fuel/water management. Proceedings of the Gas Turbine and Aeroengine Congress, Amsterdam, The Netherlands, June 6-9. ASME 88-GT-65. New York: American Society of Mechanical Engineers.

Hsu, L.L., W.G. Stevens, and A.R. Stetson. 1979. Development and Evaluation of Processes for Deposition of Ni/Co-Cr-Al-Al-Y (MCrAlY) Coatings for Gas Turbine Components. Final Report. Contract F33615-76-C-5379. Wright-Patterson Air Force Base, Ohio: Air Force Materials Laboratory.


Ingham, H.S. and A.P. Shepard. 1965. Metco Flame Spray Handbook, Vol. III. Westbury, New York: Metco. Inc.

International Nickel Company. 1977. High Strength, High Temperature Nickel Base Superalloys, 3rd ed. Saddlebrook, New Jersey: International Nickel Company, Inc.


Jacobson, N.S. 1992. High-Temperature Durability Considerations for HSCT Combustor. NASA Technical Paper 3162. Washington, D.C.: National Aeronautics and Space Administration.

Jacobson, N.S., J.L. Smialek, and D.S. Fox. 1990. Molten salt corrosion of SiC and Si3N4. Pp. 99-135 in Handbook of Ceramics and Composites, Vol. 1: Synthesis and Properties, N.P. Cheremisinoff, ed. New York: Dekker.

Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×

Kingery, W.D., H.K. Bowen, and D.R. Uhlmann. 1976. Introduction to Ceramics. New York: Wiley & Sons.


Lammermann, H., and G. Kienal. 1991. PVD coatings for aircraft turbine blades. Advanced Materials and Processes 140(6): 18-23.

Larsen, D.C., J.W. Adams, L.R. Johnsen, A.P.S. Teotia, and L.G. Hill. 1985. Ceramic Materials for Advanced Heat Engines. Park Ridge, New Jersey: Noyes Publications.

Lee, E.Y., and R.D. Sisson. 1994. The effect of bond coat oxidation on the failure of thermal barrier coatings: thermal spray industrial applications. Pp. 55-59 in Proceedings of the 7th National Thermal Spray Conference, Boston, Mass., June 20-24, C.C. Berndt and S. Sampath, eds. Materials Park, Ohio.: ASM International.

Lee, K.N., N.S. Jacobson, and R.A. Miller. 1994. Refractory oxide coatings on SiC ceramics. MRS Bulletin 10:35-38.

Lefebvre, A.H. 1983. Gas Turbine Combustion. Washington, D.C.: Hemisphere Publishing Corporation.


Manning-Meier, S.M., and D. Gupta. 1992. The evolution of thermal barrier coatings in gas turbine engine applications. Paper presented at the International Gas Turbine and Aeroengine Congress and Exposition, Cologne, Germany, June. ASME Paper 92-GT-203. New York: American Society of Mechanical Engineers.

Manning-Meier, S.M., D.M. Nissley, K.D. Sheffler, and T.A. Cruse. 1991. Thermal Barrier Coating Life Prediction Model Development. ASME Paper 91-GT-40. New York: American Society of Mechanical Engineers.

Maracocchi, T.F., and D.V. Rigney. 1992. PVD thermal barrier coaters: advances in physical vapor deposition coaters. GE-AE The Leading Edge (Spring).

McKee, D.W. 1993. Oxidation and protection of Ti3Al-based intermetallic alloys. Pp. 953-958 in 1992 Materials Research Society Symposium Proceedings, Vol. 288, I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo, eds. Pittsburgh, Pennsylvania: Materials Research Society.

McKee, D.W., and S.C. Huang. 1990. Oxidation behavior of gamma-titanium aluminides. Proceedings of the Materials Research Society 213:939-943.

Meetham, G.W. 1988. A rational return to the stone age. Pp. 38.1-38.6 in Proceedings of the International Conference on PM Aerospace Materials, Lucerne, Switzerland, November 2-4, 1987. Shrewsbury, England: MPR Publishing Services, Ltd.

Meier, G.H., D. Appalonia, R.A. Perkins, and K.T. Chiang. 1989. Oxidation of Ti-base alloys. Pp. 185-193 in Oxidation of Intermetallics, T. Grobstein and J. Doychak, eds. Warrendale, Pennsylvania: The Materials Society.

Miller, R.A. 1984. Oxidation based model for thermal barrier coating life. Journal of the American Ceramic Society 67(8):517.

Miller, R.A. 1986. Ceramic thermal barrier coatings for electric utility gas turbine engines. Paper presented at the 3rd Berkeley Conference on Corrosion, Erosion, and Wear of Materials, Berkeley, California, January 29-31. NASATM-87288. Cleveland, Ohio: National Aeronautics and Space Administration Lewis Research Center.

Miller, R.A. 1990. Assessment of Fundamental Materials Needs for Thick Thermal Barrier Coatings for Truck Diesel Engines. NASA-TM-103130. Washington, D.C.: National Aeronautics and Space Administration.

Miller, R.A., and W.J. Brindley. 1992. Plasma sprayed thermal barrier coatings on smooth surfaces. Pp. 493-498 in Thermal Spray: International Advances in Coatings Technology. Materials Park, Ohio: ASM International.

Miller, R.A., and C.E. Lowell. 1982. Failure mechanisms of thermal barrier coatings exposed to elevated temperatures. Thin Solid Films 95(3):265-273.

Mueller, A., G. Wang, E.L. Courtright, and R.A. Rapp. 1991. Development and cyclic oxidation behaviour of a protective (Mo,W)(Si,Ge)2 coating on Nb-base alloys. Journal of the Electrochemical Society 139:1266-1277

Murphy, J.C., J.W. Maclachlan, and L.C. Aamodt. 1988. Thermal imaging of barrier coatings on refractory substrates. Review of Progress in Quantitative Nondestructive Evaluation 7:245-252

Murphy, J.C., J.W.M. Spicer, and R. Osiander. 1993. Thermal Imaging of High-Temperature Coating. Presentation to the Committee on Coatings for High-Temperature Structural Materials, National Materials Advisory Board, National Research Council, Washington, D.C., October 12.


Nealy, D., and S. Reider. 1979. Evaluation of Laminated Porous Wall Materials for Combustor Liner Cooling. ASME Paper 79-GT-100. New York: American Society of Mechanical Engineers.

Nesbitt, J.A., and R.W. Heckel. 1984. Modeling of degradation and failure of Ni-Cr-Al overlay coatings. Thin Solid Films 119:281-290.

Novak, R.C. 1994. Coating Development and Use: Case Studies. Presentation to the Committee on Coatings for High-Temperature Structural Materials, National Materials Advisory Board, National Research Council, Irvine, California, April 18-19.

NRC (National Research Council). 1986. Materials For Large Land-Based Gas Turbines. National Materials Advisory Board, Commission on Engineering and Technical Systems. NMAB-430. Washington, D.C.: National Academy Press.

NRC. 1989. On-Line Control of Metal Processing. National Materials Advisory Board, Commission on Engineering and Technical Systems. Washington D.C.: National Academy Press.

NRC. 1995a. Coal: Energy for the Future. Board on Energy and Environmental Systems, Commission on Engineering and Technical Systems. Washington D.C.: National Academy Press.

NRC. 1995b. Expanding the Vision of Sensor Materials. National Materials Advisory Board, Commission on

Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×

Engineering and Technical Systems. Washington D.C.: National Academy Press.

NRC. 1995c. Computer-Aided Materials Selection for Structural Design. National Materials Advisory Board, Commission on Engineering and Technical Systems. Washington D.C.: National Academy Press.


Palko, J.E., K.L. Luthra, and D.W. McKee. 1978. Evaluation of Performance of Thermal Barrier Coatings under Simulated Industrial/Utility Gas Turbine Conditions. Final Report. DOE Contract No. EC-77-c-o5-5402. Washington, D.C.: DOE.

Pettit, F.S. 1967. Oxidation mechanisms for nickel-aluminum alloys at temperatures between 900°C and 1300°C. Metallurgical Transactions 239(September): 1296.


Ramesh, K., and A. Markworth. 1993. Functionally Graded Materials: The State of the Art. Presentation to the Committee on Coatings for High-Temperature Structural Materials, National Materials Advisory Board, National Research Council, Washington, D.C.

Rapp, R.A., and Y.S. Zhang. 1994. Hot Corrosion of Materials: Fundamental Studies. JOM 46(December):47-55.

Rigney, D.V., R. Viguie, D.J. Wortman, and W.W. Skelly. 1995. PVD thermal barrier coating applications and process development for aircraft engines. Pp. 135-150 in Proceedings of the Workshop on Thermal Barrier Coatings. NASA-CP-3312. Cleveland, Ohio: National Aeronautics and Space Administration Lewis Research Center.


Sims, C.T. 1986. Superalloys: genesis and character. Pp. 3-26 in Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds. New York: John Wiley & Sons.

Sims, C.T. 1991. ATS program. Advanced Materials and Processes 139(6):32-39.

Sims, C.T., N.S. Stoloff, and W.C. Hagel, eds. 1986. Superalloys II. New York: John Wiley & Sons.

Smialek, J.L. 1991. Effect of sulfur removal on A1203 scale adhesion. Metallurgical Transactions A 22(3):739-752.

Smialek, J.L. 1993. Oxidation behaviour of TiAl3 coatings and alloys. Corrosion Science 35(5-8)1199-1208.

Smialek, J.L., and B.K. Tubbs. 1995. Effect of sulfur removal on scale adhesion to PWA 1480. Metallurgical and Materials Transactions A 26(2):427.

Smialek, J.L., M.A. Gedwill, and P.K. Brindley. 1990. Cyclic oxidation of aluminide coatings on Ti3Al + Nb. Scripta Metallurgica et Materialia 24(7):1291.

Smith, J.S., and D.H. Boone. 1990. Platinum-Modified Aluminides-Present Status. Paper presented at the International Gas Turbine and Aeroengine Congress and Exposition, Brussels, Belgium, June.

Soechting, F. 1994. Gas Turbine Design Issues. Presentation to the Committee on Coatings for High-Temperature Structural Materials, National Materials Advisory Board, National Research Council, Washington D.C., February 17-18.

Soechting, F. 1995. A design perspective on thermal barrier coatings. Paper presented at the Proceedings of the Workshop on Thermal Barrier Coating. NASA-CP-3312. Cleveland, Ohio: National Aeronautics and Space Administration Lewis Research Center.

Sprague, R., and S. Freisen. 1986. Superalloy component durability enhancements. Journal of Metals 38(7):24-30.

Stephens, J.R. 1993. Materials/Coatings Requirements for the HSCT Propulsion System. Presentation to the Committee on Coatings for High-Temperature Structural Materials, National Materials Advisory Board, National Research Council, San Antonio, Texas, December 13-14.

Stoloff, N.S., and C.T. Sims. 1986. Alternative materials. Pp. 519-547 in Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds. New York: John Wiley & Sons.

Strangman, T.E. 1985. Thermal barrier coatings for turbine airfoils. Thin Solid Films 127:93-105.

Strangman, T.E. 1987. Development and performance of physical vapor deposition thermal barrier coating systems. Paper presented at the 1987 Proceedings of the Workshop on Coatings for Advanced Heat Engines, Castine, Maine, July 27-30. Washington, D.C.: U.S. Department of Energy.

Strangman, T.E. 1990. Turbine coating life prediction model. In the 1990 Proceedings of the Workshop on Coatings for Advanced Engines, August. Washington, D.C.: U.S. Department of Energy.

Stringer, J., and R. Viswanathan. 1990. Keynote address: Life assessment techniques and coating evaluations for combustion turbine blades. Pp. 1-18 in Life Assessment and Repair Technology for Combustion Turbine Hot Section Components: Proceedings of an International Conference. Materials Park, Ohio: ASM International.

Stringer, J., and R. Viswanathan. 1993. Gas turbine hot-section materials and coatings in electric utility applications. Pp. 1-21 in Proceedings of ASM 1993 Materials Congress Materials Week '93, Pittsburgh, Pennsylvania, October 17-21. Materials Park, Ohio: ASM International.


Taguchi, G. 1993. Robust Development. New York: American Society of Mechanical Engineers Press .

Tiegs, T.N., M.K. Ferber, and P.F. Becher. 1992. Toughened ceramic composites: second-phase particulates, transformation toughening and whisker reinforcement. Pp. 43-57 in Flight-Vehicle Materials, Structures and Dynamics Assessment and Future Directions, Vol. 3, S.R. Levine, ed. New York: American Society of Mechanical Engineers.

Turner, E., J. Rhodes, and L. Junod. 1992. Cooled Wall Structure Especially for Gas Turbine Engines. U.S. Patent, Number 5,152,667.


Ulion, N., and N. Anderson. 1993. Advanced Thermal Barrier Coated Superalloy Components. U.S. Patent, Number 5,262,245.


Van Roode, M., J.R. Price, and C. Stala. 1992. Ceramic oxide coatings for the corrosion protection of silicon carbide. Journal of Engineering Gas Turbines Power Transactions ASME 115(1):139-149.

Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×

Vasudevan, A.K., and J.J. Petrovic. 1992. A comprehensive overview of molybdenum disilicide composites. Materials Science and Engineering A155(1-2): 1-17.


Walston, W.S., E.W. Ross, K.S. O'Hara, and T.M. Pollock. 1993. U.S. Patent, Number 5,270,123.

Wood, J.H., and E.H. Goldman. 1986. Protective coatings. Pp. 359-384 in Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds. New York: John Wiley & Sons.


Yonushonis, T.M., D.P. Roehling, K.L. Hoag, R.C. Novak, A.P. Matarese and R.P. Huston. 1987. Thick thermal barrier coatings for diesel engines. Paper presented at the 1987 Proceedings of the Workshop on Coatings for Advanced Heat Engines, Castine, Maine, July 27-30. Washington D.C.: U.S. Department of Energy.

Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×
This page in the original is blank.
Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×
Page 51
Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×
Page 52
Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×
Page 53
Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×
Page 54
Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×
Page 55
Suggested Citation:"REFERENCES." National Research Council. 1996. Coatings for High-Temperature Structural Materials: Trends and Opportunities. Washington, DC: The National Academies Press. doi: 10.17226/5038.
×
Page 56
Next: A TESTING AND STANDARDS »
Coatings for High-Temperature Structural Materials: Trends and Opportunities Get This Book
×
Buy Paperback | $53.00 Buy Ebook | $42.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!