The committee has identified three key research directions for the development of improved fire-resistant materials:

  • Modification of specialty polymers including thermoplastics such as polyetheretherketone, polyetherimide, polyphenylene sulfide, and polysulfone and thermosets such as cyanate esters, bismaleimides, polyimides, and polybenzimidizole. This approach may provide the best performance in the near term (<10 years).

  • Development of new, high-performance, thermally stable materials including organic/inorganic systems, copolymers, polymer blends and alloys, and glasses and ceramics. These materials have the potential for the best performance in the long term (> 10 years).

  • Modification of existing engineering polymers including thermoplastics such as polycarbonates, nylons, and polyethyleneterephthalate and thermosets such as phenolics and polyesters. While it is not clear that this approach would lead to the significant improvement in performance sought, this approach may result in significant cost reductions.

A basic scientific understanding of char and intumescence on flammability is crucial to the development of improved materials. Research in char formation should include structural characterization and mechanical behavior (durability) and its relationships to exposure atmosphere, heating rate, chemical derivatization, additives, and coatings. Also the effect of char formation on toxicity needs to be characterized.

The two general technical directions for polymer materials development to improve fire and smoke resistance identified by the committee are incorporation of additives in polymers and synthesis of thermally stable, tim-resistant polymers. Particularly promising approaches are discussed in detail in Chapter 4. These include thin laminated or co-extruded films and blends, coatings and additives (including intumescents), phase-change or temperature sensitive materials, organic/inorganic polymer blends, polymer blends utilizing a high char-forming polymer as an additive, and polymer modifications. Additive approaches include volatile-phase active flame retardants that inhibit the combustion process, condensed-phase active flame retardants that lead to char or intumescence, flame retardants that endothermically lose non-toxic volatile components, heat-sink additives, toxicant suppressants, and combinations of additives that take advantage of synergistic effects (i.e., multiple additives with differing but cooperative modes of activity in optimized combinations).


  • Perform research to improve the fundamental understanding of polymer combustion, including thermal degradation, char formation, intumescence, toxic gas production, and heat effects. Place special emphasis on the characterization of char and intumescence processes.

  • Investigate new additive approaches that allow for significant improvements in fire resistance and reduced toxic gas production in current materials.

  • Facilitate the development of new or modified polymers with significantly improved resistance to ignition and flame spread. Emphasize the modification of existing specialty polymers to obtain desired properties and the development of new thermally stable polymers or blends.

  • Evaluate and prioritize research and technological development efforts to ensure that the new materials will meet end-use requirements. Issues to be considered include costs; the contemporaneous processing and production capabilities of the materials and aircraft industries; ability to meet the design, performance, comfort, and aesthetic demands of aircraft interior applications; and compliance with environmental and health and safety regulations and practices.


New fire-resistant materials are of little practical value for aircraft interior use if the industrial processing technologies required to manufacture parts are not fully developed and broad-based. Short-and long-term strategies should be developed to characterize new material opportunities for compatibility with existing processes, as well as determining needs for future designs and manufacturing technologies. Short-to mid-range strategies should focus on researching materials that can be produced with existing tooling and manufacturing processes. Long-term strategies should evaluate both materials that can be processed with today's technologies as well as with future technologies. Where improved fire performance can only be achieved with materials requiring new manufacturing processes, materials research and manufacturing process development should be conducted concurrently to ensure smooth implementation.

Research should also be aimed toward developing material constructions with equivalent or lower-weight and simplified processing requirements compared with currently used materials. Acceptance and utilization of new materials would be greatly enhanced where manufacturing and in-use performance advantages are readily achieved and demonstrated. For example, new materials and manufacturing approaches may

The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement