Acknowledgments

The author is grateful to the University of Victoria for support of this work and to the many individuals in companies whose readiness to provide information made the reported analyses possible. They are acknowledged wherever feasible in the published full accounts of this work.

References

Berry, R. S., and H. Makino. 1974. Energy thrift in packaging and marketing. Technology Review 76(4):32-43.

Berry, R. S., T. V. Long II, and H. Makino. 1975. Energy budgets: 5. An international comparison of polymers and their alternatives. Energy Policy 3(2): 144-155.

Boustead, I., and G. F. Hancock. 1979. Handbook of Industrial Energy Analysis. New York: John Wiley & Sons.


Chapman, P. F., G. Leach, and M. Slesser. 1974. The energy cost of fuels. Energy Policy 2(3):231-243.


Fenton, R. 1992. The Winnipeg Packaging Project: Report No. 2. Comparison of Coffee Cups. Winnipeg, Manitoba: The University of Winnipeg.


Gaines, L. L. 1981. Energy and Materials Use in the Production and Recycling of Consumer Goods Packaging. Report ANL/CNSV-TM-58. Argonne, Ill.: Argonne National Laboratories.


Hocking, M. B. 1985. Modern Chemical Technology and Emission Control. New York: Springer-Verlag.

Hocking, M. B. 1991a. Paper versus polystyrene: A complex choice. Science 251:504-505.

Hocking, M. B. 1991b. Relative merits of polystyrene foam and paper in hot drink cups: Implications for packaging. Environmental Management 15:731-747.

Hocking, M. B. 1994a. Disposable cups have eco merit. Nature 369:107.

Hocking, M. B. 1994b. Reusable and disposable cups: An energy-based evaluation. Environmental Management 18:889-899.


International Energy Agency, Organization for Economic Co-operation and Development (OECD). 1993. Energy Statistics of OECD Countries, 1990-1991. Paris: OECD.


Kindler, H., and A. Nikles. 1979. Energiebedarf bei der Herstellung und Verarbeitung von Kunststoffen. Chemie-Ingenieur-Technik 51(11): 1125-1127.

Kindler, H., and A. Nikles. 1980. Energieufwand zur Herstellung von Werkstoffen: Berechnungsgrundsätze und Energieäquivalenzwerte von Kunststoffen. Kunstoffe 70 (12):802-807.


Miller, R. K., ed. 1983. Energy Conservation and Utilization in the Glass Industry. Atlanta, Ga.: Fairmont Press Inc.


Ringwald, R. M. 1982. Energy and the chemical industry. Chemical & Industry 9:281-286.


United Nations. 1990. World Resources, 1990-1991, A Report by the World Resources Institute and the United Nations Environment Programme. Oxford, England: Oxford University Press.


van Eijk, J., J. W. Nieuwenhuis, C. W. Post, and J. H. de Zeeuw. 1992. Reusable versus Disposable. A Comparison of the Environmental Impact of Polystyrene, Paper/Cardboard, and Porcelain Crockery. Zoetermeer, Netherlands: Ministry of Housing, Physical Planning and Environment.

Vigon, B. W., D. A. Tolle, W. Cornaby, H. C. Latham, C. L. Harrison, T. L. Boguski, R. G. Hunt, and J. D. Sellers. 1992. Product Life-Cycle Assessment: Inventory Guidelines and Principles. Cincinnati, Ohio: U.S. Environmental Protection Agency.



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement