References

ACI Committee 544. 1986. State-of-the-Art Report on Fiber Reinforced Concrete. 544.1R-82. Detroit, Mich.: American Concrete Institute.

ACI. 1995. Manual of Concrete Practice, vol. 1. Detroit, Mich.: American Concrete Institute.

Ashby, M.F. 1992. Materials Selection in Mechanical Design. New York: Pergamon.

Banfill, P.F.G. 1993. Structure and rheology of cement-based systems. In Flow and Microstructure of Dense Suspensions, L.J. Struble, C.F. Zukoski, and G.C. Martland (eds.). Proceedings of the MRS Symposium, vol. 289. Pittsburgh, Pa.: Materials Research Society.

Banthia, N., and S. Mindess (eds). 1995. Fiber Reinforced Concrete: Modern Developments. Vancouver, Canada: University of British Columbia Press.

Bentur, A., and S. Mindess. 1990. Fiber Reinforced Cementitious Composites. London: Elsevier.

Bentz, D.P., P.V. Coveney, E.J. Garboczi, M.F. Kleyn, and P.E. Stutzman. 1994. Cellular automaton simulations of cement hydration and microstructure development. Modeling Simulated Materials Science and Engineering 2:783-808.

Chappuis, J. 1991. Rheology of Fresh Cement and Concrete. Cambridge: Cambridge University Press.

Chu, T.-J., J.-H. Kim, C. Park, and R.E. Robertson. 1994. Effects of poly[vinyl alcohol] on fiber cement interfaces, part II: micro-structure. Advances in Cement-Based Materials 1:122.

Crumbie, A.K., K.L. Scrivener, and P.L. Pratt. 1989. Pore structure and permeability of cementitious materials. Pp. 279–284 in MRS Symposium Proceedings, vol. 137. Pittsburgh, Pa.: Materials Research Society.



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement



Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 86
Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure References ACI Committee 544. 1986. State-of-the-Art Report on Fiber Reinforced Concrete. 544.1R-82. Detroit, Mich.: American Concrete Institute. ACI. 1995. Manual of Concrete Practice, vol. 1. Detroit, Mich.: American Concrete Institute. Ashby, M.F. 1992. Materials Selection in Mechanical Design. New York: Pergamon. Banfill, P.F.G. 1993. Structure and rheology of cement-based systems. In Flow and Microstructure of Dense Suspensions, L.J. Struble, C.F. Zukoski, and G.C. Martland (eds.). Proceedings of the MRS Symposium, vol. 289. Pittsburgh, Pa.: Materials Research Society. Banthia, N., and S. Mindess (eds). 1995. Fiber Reinforced Concrete: Modern Developments. Vancouver, Canada: University of British Columbia Press. Bentur, A., and S. Mindess. 1990. Fiber Reinforced Cementitious Composites. London: Elsevier. Bentz, D.P., P.V. Coveney, E.J. Garboczi, M.F. Kleyn, and P.E. Stutzman. 1994. Cellular automaton simulations of cement hydration and microstructure development. Modeling Simulated Materials Science and Engineering 2:783-808. Chappuis, J. 1991. Rheology of Fresh Cement and Concrete. Cambridge: Cambridge University Press. Chu, T.-J., J.-H. Kim, C. Park, and R.E. Robertson. 1994. Effects of poly[vinyl alcohol] on fiber cement interfaces, part II: micro-structure. Advances in Cement-Based Materials 1:122. Crumbie, A.K., K.L. Scrivener, and P.L. Pratt. 1989. Pore structure and permeability of cementitious materials. Pp. 279–284 in MRS Symposium Proceedings, vol. 137. Pittsburgh, Pa.: Materials Research Society.

OCR for page 86
Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure Davis, M.A., D.G. Bellemore, A.D. Kersy, M.A. Putnam, E.J. Friebele, R.L. Idriss, and M. Kodinduma. 1996. High sensor-count bragg grating instrumentation system for large-scale structural monitoring applications. Pp. 1–7 in Proceedings of the SPIE. San Diego, California: SPIE. DOT (U.S. Department of Transportation). 1995. 1995 Status of the Nation's Surface Transportation System: Condition and Performance. Federal Highway Administration, Department of Transportation. Washington, D.C.: DOT. Fibermesh Company Product Literature. 1995. Chattanooga, Tenn.: Fibermesh Co. Gorur, K., M.K. Smit, and F.H. Wittmann. 1982. Microwave study of hydrating cement paste at early age. Cement and Concrete Research 12:447–454. Hannaut, D.J. 1978. Fibre Cements and Fibre Concretes. New York: John Wiley and Sons. Hansson, C.M. 1995. Concrete: the advanced industrial material of the 21st century. Metallurgical and Materials Transactions A 26A(June):1321–1341. Henrichsen, D. 1996. National Materials Advisory Board, National Research Council Workshop on Nonconventional Concrete Technologies for Renewal of the Infrastructure . Washington, D.C. Hutchison, R.G., J.T. Chang, H.M. Jennings, and M.E. Brodwin. 1991. Thermal acceleration of Portland cement mortars with microwave energy . Cement and Concrete Research 21:795–799. Jensen, A.D., E. Eriksen, S. Chatterji, N. Thaulow, and I. Brandt. 1985. Beton-teknik: Strukturanalyse af beton. Aalborg, Denmark: Cementfabrikkernes tekniske oplysningskontor, Aalborg Portland Cement Fabrik. Johnson, D.L. 1996. National Materials Advisory Board, National Research Council Workshop on Nonconventional Concrete Technologies for Renewal of the Infrastructure . Washington, D.C. Keer, J.G. 1984. Fiber reinforced concrete. Pp. 2–105 in New Reinforced Concretes: Concrete Technology and Design, vol. 2, R.N. Swamy (ed.). Surrey, Great Britain: Surrey University Press. Lea, F.M., and T.W. Parker. 1964. In Phase Diagrams for Ceramists, E.M. Levin, C.R. Robbins, and H.F. McMurdie (eds). Columbus, Ohio: American Ceramic Society. Lin, X., M.R. Silsbee, D.M. Roy, K. Kessler, and P.R. Blankenhorn. 1994. Approaches to improve the properties of wood fiber reinforced cementitious composites. Cement and Concrete Research 24(8):1558–1566.

OCR for page 86
Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure Livingston, R.A., D.A. Neumann, A. Allen, and J.J. Rush. 1995. Application of neutron scattering methods to cementitious materials . Pp. 459–469 in Materials Research Society Symposium Proceedings, vol. 376. Pittsbugh, Pa.: Materials Research Society. Majumdar, A.J., and V. Laws. 1991. Glass Fibre Reinforced Cement. Oxford: Blackwell. McCarter, W.J., and P.N. Curan. 1984. The electrical response characteristic of setting cement paste. Magazine of Concrete Research 36:42–49. Mehta, P.K. 1986. Concrete: structure, properties and materials. In International Series in Civil Engineering and Engineering Mechanics , W.J. Hall (ed). Englewood Cliffs, N.J.: Prentice-Hall, Inc. Moff, G. 1996. Presentation at ACI/CANMET Conference on Concrete in Marine Environments, St. Andrews by the Sea, Canada. Naik, T.R., and B.W. Ramme. 1987. Determination of the water content of concrete by the microwave method . Cement and Concrete Research 17:927–938. NRC (National Research Council). 1987. Concrete Durability: A Multibillion-Dollar Opportunity. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press. NRC. 1988. The Impact of Supercomputing Capabilities on U.S. Materials Science and Technology. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press. NRC. 1989. Materials Science and Engineering for the 1990s: Maintaining Competitiveness in the Age of Materials. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press. NRC. 1991. Enabling Technologies for Unified Life-Cycle Engineering of Structural Components. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press. NRC. 1993. Materials Research Agenda for the Automotive and Aircraft Industries . National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press. NRC. 1995a. Expanding the Vision of Sensor Materials. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press. NRC. 1995b. Materials for High-Temperature Semiconductor Devices. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

OCR for page 86
Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure NRC. 1995c. Computer-Aided Materials Selection During Structural Design. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press. Osborn, E.F., and A. Muan. 1964. In Phase Diagrams for Ceramists, E.M. Levin, C.R. Robbins, and H.F. McMurdie (eds). Columbus, Ohio: American Ceramic Society. Perez, M., and D.M. Roy. 1984. Electrical properties of normal and high strength cementitious materials . American Ceramics Society Bulletin. March. Perez-Pena, M. 1986. Electrical conductivity and dielectric studies of hydraulic cements. Ph.D. thesis. The Pennsylvania State University, University Park, Pa. Perez-Pena, M., D.M. Roy, A.S. Bhalla, and L.E. Cross. 1986. Dielectric properties of densified hardened cementitious materials . Cement and Concrete Research 16:951–966. Perez-Pena, M., D.M. Roy, and F.D. Tamas. 1989. Influence of chemical composition and inorganic admixtures on the electrical conductivity of hydrating cement pastes. Journal of Materials Research 4(1):215–223. Perez-Pena, M., D.M. Roy, P. Kistler, M.T. Lanagan, and L.E. Cross. 1989. Cementitious materials for electronic packaging: I. processing, electrical and mechanical properties of chemically bonded ceramics: SiO2-amorphous/Ca3SiO5 Composites. Pp. 279–285 in Ceramic Substrates and Packages for Electronic Applications, M.Y. Yan, H.M. O'Bryan, Jr., K. Niwa, and W.S. Young (eds). Advances in Ceramics, vol. 26. Columbus, Ohio: American Ceramic Society. Popovics, S. 1992. Concrete Materials. Park Ridge, N.J.: Noyes Data Corporation. Robertson, R.E. 1995. Poly[vinyl alcohol] as an admixture in cement. ACBM Cementing the Future. 7(1):4. Roy, D.M., and K. Asaga. 1979. Rheological properties of cement mixes, III: the effects of mixing procedures on viscometric properties of mixes containing superplasticizers . Cement and Concrete Research 9(6):731–740. Sakai, E., and M. Daimon. 1995. Mechanisms of superplastification. Pp. 91-113 in Materials Science of Concrete, vol. 4, J. Skalny and S. Mindess (eds). Westerville, Ohio: American Ceramic Society. Shah, S.P., and A. Winter. 1968. Inelastic Behavior and Fracture of Concrete. Pp. 5–28 in Proceedings of the Symposium on Causes, Mechanism, and Control of Cracking in Concrete. SP #20. Detroit, Mich.: American Concrete Institute.

OCR for page 86
Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure Scrivener, K. 1984. Ph.D. thesis. Imperial College, London. Soroka, I. 1979. Portland Cement Paste and Concrete. London: MacMillan Press, Ltd. Taylor, H.F.W. 1990. Cement Chemistry. London: Academic Press. Van Humbeeck, J.V., I.D. Reynaerts, and J.P. Katholieke. 1996. New opportunites for shape memory alloys for actuators, biomedical engineering, and smart materials. Mat Tech 11(2):55–61. Wang, Y. 1996. National Materials Advisory Board, National Research Council Workshop on Nonconventional Concrete Technologies for Renewal of the Infrastructure . Washington, D.C. Wang, Y., S. Backer, and V.C. Li. 1987. An experimental study of synthetic fiber-reinforced cementitious composites. Journal of Materials Science 22:4281–4291. Wang, Y., A.H. Zureick, B.S. Cho, and D.E. Scott. 1994. Properties of fiber reinforced concrete using recycled fibers from carpet industrial waste. Journal of Materials Science 29(16):4191–4199. Wu, X., J. Dong, and M. Tang. 1987. Microwave curing technique in concrete manufacture. Cement and Concrete Research 17:205–210. Yang, M., and H.M. Jennings. 1993. On the development of rheological properties of cement paste during the induction period. In Flow and Microstructure of Dense Suspensions, L.J. Struble, C.F. Zukoski, and G.C. Martland (eds.). Proceedings of the MRS Symposium, vol. 289. Pittsburgh, Pa.: Materials Research Society.