30. S.M. Spearing and A.G. Evans , “The Role of Fiber Bridging in the Delamination Resistance of Fiber-Reinforced Composites,” Acta Metall. Mater., 40 , 2191-2199 ( 1992 ).

31. F.A. Heredia , M.Y. He , and A.G. Evans , “Mechanical Performances of Ceramic Matrix Composite I-Beams,” Composites, 27A , 1157-1167 ( 1996 ).

32. S. Jansson and F.A. Leckie , “Transverse Tensile and Inplane Shear Strength of Weakly Bonded Fiber Reinforced MMC's Subjected to Cyclic Thermal Loading,” Mech. Mater., 18 , 205-212 ( 1994 ).

33. A. Burr , J. Yang , C.G. Levi , and F.A. Leckie , “The Strength of Metal-Matrix Composite Joints,” Acta Metall. Mater., 43 , 3361-3373 ( 1995 ).

34. F.W. Zok , M.Y. He , A.G. Evans , F.A. Leckie , and H.E. Deve , “Strength-Limited Design of Composite/Monolith Transitions in Metallic Structures,” Composites, 28A , 399-407 ( 1997 ).

35. John Busch , IBIS Associates , Wellesley, Mass. , private communication, May 1996 .

36. R. Anderson , Pratt and Whitney , West Palm Beach, Fla. , private communication, January 1996 .

37. W. Tu , F.F. Lange , and A.G. Evans , “Concept for a Damage-Tolerant Ceramic Composite with ‘Strong' Interfaces,” J. Am. Ceram. Soc., 79 , 417-24 ( 1996 ).

38. W.A. Curtin , “Theory of Mechanical Properties of Ceramic-Matrix Composites,” J. Am. Ceram. Soc., 74 , 2837-2845 ( 1991 ).

39. Z.Z. Du and R.M. McMeeking , “Control of Strength Anisotropy of Metal Matrix Fiber Composites,” J. Computer-Aided Mater. Design, 1 , 243-264 ( 1994 ).

40. J.W. Hutchinson and H. Jensen , “Models of Fiber Debonding and Pullout in Brittle Composites with Friction,” Mech. Mater., 9 , 139 ( 1990 ).

41. W.A. Curtin , “Fiber Pull-Out and Strain Localization in Ceramic Matrix Composites, ” J. Mech. Phys. Solids, 41 , 217-245 ( 1993 ).

42. M.Y. He , A.G. Evans , and W.A. Curtin , “The Ultimate Tensile Strength of Metal and Ceramic-Matrix Composites, ” Acta Metall. Mater., 41 , 871-878 ( 1993 ).

43. S.L. Phoenix , “Statistical Issues in the Fracture of Brittle-Matrix Fibrous Composites, ” Compos. Sci. Technol., 48 , 65-80 ( 1993 ).

44. R.B. Henstenburg and S.L. Phoenix , “Interfacial Shear Strength Studies Using the Single-Filament-Composite Test. II. A Probability Model and Monte Carlo Simulation,” Polym. Compos., 10 , 389-408 ( 1989 ).

45. S.L. Phoenix and R. Raj , “Scalings in Fracture Probabilities for a Brittle Matrix Fiber Composite, ” Acta Metall. Mater., 40 , 2813-2828 ( 1992 ).

46. T.J. Kotil , J.W. Holmes , and M. Comninou , “Origin of Hysteresis Observed During Fatigue of Ceramic-Matrix Composites, ” J. Am. Ceram. Soc., 73 , 1879 ( 1990 ).

47. J.M. Domergue , E. Vagaggini , and A.G. Evans , “Relationships Between Hysteresis Measurements and the Constituent Properties of Ceramic Matrix Composites: II. Experimental Studies on Unidirectional Materials,” J. Am. Ceram. Soc., 78 , 2721-2731 ( 1995 ).

48. A.G. Evans , J.M. Domergue and E. Vagaggini , “Methodology for Relating the Tensile Constitutive Behavior of Ceramic-Matrix Composites to Constituent Properties,” J. Am. Ceram. Soc., 77 , 1425-1435 ( 1994 ).

49. M. Ibnabdeljalil and W.A. Curtin , “Strength and Reliability of Fiber-reinforced Composites: Localized Load Sharing and Associated Side Effects,” to be published in International Journal of Solids and Structures.

50. Z.C. Xia , J.W. Hutchinson , A.G. Evans , and B. Budiansky , “On Large Scale Sliding in Fiber-Reinforced Composites,” J. Mech. Phys. Solids, 42 , 1139-1158 ( 1994 ).

51. B. Budiansky and Y.L. Cui , “Toughening of Ceramics by Short Aligned Fibers,” Mech. Mater., 21 , 139-146 ( 1995 ).

52. G. Genin and J.W. Hutchinson , “High Temperature Ceramic Matrix Composites II,” J. Am. Ceram. Soc., in press .

53. C. Xia , R.R. Carr , and J.W. Hutchinson , “Transverse Cracking in Fiber-Reinforced Brittle Matrix, Cross-Ply Laminates,” Acta Metall. Mater., 41 , 2365 ( 1993 ).

54. C. Xia and J.W. Hutchinson , “Matrix Cracking of Cross-Ply Ceramic Composites,” Acta Metall. Mater., 42 , 1935-1945 ( 1994 ).

55. J.-M. Domergue , F.E. Heredia , and A.G. Evans , “Hysteresis Loops and the Inelastic Deformation of 0/90 Ceramic Matrix Composites,” J. Am. Ceram. Soc., 79 , 161-170 ( 1996 ).

56. F. Hild , A. Burr , and F.A. Leckie , “Matrix Cracking and Debonding of Ceramic-Matrix Composites,” Int. J. Solids Struct., 33 , 1209-1220 ( 1996 ).

57. M.Y. He , B.-X. Wu , A.G. Evans , and J.W. Hutchinson , “Inelastic Strains Due to Matrix Cracking in Unidirectional Fiber-Reinforced Composites,” Mech. Mater., 18 , 213-229 ( 1994 ).

58. S.K. Chan , M.Y. He , and J.W. Hutchinson , “Cracking and Stress Redistribution in Ceramic Layered Composites, ” Mater. Sci. Eng., A167 , 57-64 ( 1993 ).

59. D.K. Leung , M.Y. He , and A.G. Evans , “The Cracking Resistance of Nanoscale Layers and Films,” J. Mater. Res., 10 , 1693-1699 ( 1995 ).

60. M.C. Shaw , D.B. Marshall , B.J. Dalgleish , M.S. Dadkhah , M.Y. He , and A.G. Evans , “Fatigue Crack Growth and Stress Redistribution at Interfaces,” Acta Metall. Mater., 42 , 4091-4099 ( 1994 ).

61. P.K. Wright , R. Nimmer , G. Smith , M. Sensmeier , and M. Brun , “The Influence of the Interface on Mechanical Behavior of Ti6A14V/ SCS-6 Composites,” in Interfaces in Metal-Ceramics Composites, Anaheim, Calif. , February 18-22 , pp. 559-581 ( 1990 ).

62. S. Jansson , H. Deve , and A.G. Evans. , “Anisotropic Mechanical Properties of a Ti Matrix Composite Reinforced with SiC Fibers,” Metall. Trans., 22A , 2975-2983 ( 1991 ).

63. J. Neumeister , S. Jansson , and F.A. Leckie , “The Effect of Fiber Architecture on the Mechanical Properties of Carbon/Carbon Fiber Composites,” Acta Materialia, 44 , 573-585 ( 1996 ).

64. J.W. Hutchinson , T.J. Lu , and Z.C. Xia , “Delamination of Beams Under Transverse Shear and Bending,” Mater. Sci. Eng., A188 , 103-112 ( 1994 ).