Cover Image


View/Hide Left Panel

in the breaking region were presented. A flow field obtained by averaging 10 instantaneous flow fields clearly shows the evolution of a shear layer between the nearly stagnant fluid in the breaking region and the fast-moving underlying flow. From this preliminary data, it appears that the flow at the free surface near the crest is directed downstream.


This work was supported by the Office of Naval Research under contract N00014–90-J-1977 and the David Taylor Model Basin (DTMB). The authors acknowledge a number of helpful discussions with D.Rockwell and J.Katz on PIV techniques. Haibing Qiao assisted in the data acquisition of the breaker region PIV experiments, construction of the PIV equipment, and in writing some of the PIV analysis software. John Hamilton of DTMB engineered and built a timing device that was used in the PIV measurements. Alexandra Wenz developed most of the high-speed films used during these experiments. Arno Miessner and Sebastian Muncher helped to analyze some of the early high-speed movie films. Sven Eisen helped to construct some of the tank apparatus. Bruce Webster of DTMB is gratefully acknowledged for his patience in allowing a flexible work schedule for Mr. Coakley.


[1] Battjes, J.A. and Sakai, T. 1981 Velocity field in a steady breaker. J. Fluid Mech. 111, 421–437.

[2] Duncan, J.H. 1981 An experimental investigation of breaking waves generated by a towed hydrofoil. Proc. R. Soc. Lond. A 377, 331–348.

[3] Duncan, J.H. 1983a The breaking and nonbreaking wave resistance of a two-dimensional hydrofoil. J. Fluid Mech. 126, 507–520.

[4] Duncan, J.H. 1983b A note on the evaluation of the wave resistance of two-dimensional bodies from measurements of the downstream profile. J. Ship Res. 27, No. 2, 90–92.

[5] Cointe, R. and Tulin, M.P. 1994 A Theory of Steady Breakers. J. Fluid Mech. 276, 1–20.

[6] Lin, J.-C. and Rockwell, D. 1994 Instantaneous Structure of a Breaking Wave. Physics of Fluids 6, 2877–2879.

[7] Lin, J.-C. and Rockwell, D. 1996 Evolution of a Quasi-Steady Breaking Wave. J. Fluid Mech. (in press).

[8] Banner, M.L. and Fooks, E.H. 1985. On the microwave reflectivity of small-scale breaking water waves . Proc. R. Soc. London Ser. A 399, 93–109.

[9] Walker, D.T., Lyzenga, D.R., Ericson, E.A. and Lund, D.E. 1996 Radar Backscatter and Surface Roughness Measurements for Stationary Breaking Waves. Proc. R. Soc. Lond. A (in press).

[10] Rosenfeld, A. and Kak, A. 1982 Digital Picture Processing, Academic Press.

[11] Press, W., Flannery, B., Teukolsky, S. and Vetterling, W. 1986 Numerical Recipes, Cambridge University Press, Cambridge, U.K.

[12] Coleman, H.W. and Steele, W.G. 1989 Experimentation and Uncertainty Analysis for Engineers, John Wiley and Sons, New York.

[13] Duncan, J.H. and Dimas, A.A. 1996 Ripples Generated by Steady Breaking Waves, submitted to the J. Fluid Mech.

The National Academies of Sciences, Engineering, and Medicine
500 Fifth St. N.W. | Washington, D.C. 20001

Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement