National Academies Press: OpenBook
« Previous: 5 Assembly, Packaging, and Testing
Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×

References

Ahn, C.H., M.G. Allen, W. Trimmer, Y.N. Jun, S. Erramilli. 1996. A fully integrated micromachined magnetic particle separator. IEEE Journal of Microelectromechanical Systems 5(3): 151-158.

Antonsson, E.K. (ed). 1996. Structural Design Methods for MEMS: Final Report of National Science Foundation Workshop. Washington, D.C.: National Science Foundation.

Ataka, M., A. Omodaka, and H. Fujita. 1993. A biomimetric micro motion system: A ciliary motion system. Pp. 38-41 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '93) held June 7-10, 1993, in Yokohama, Japan. Yokohama, Japan: Institute of Electrical Engineers.

Auciello, O., A.R. Krauss, and K.D. Gifford. 1996. Sputter deposition of ferroelectric films and hetero structures: Analysis of orientation-microstructure-property relationships and in situ, real-time characterization of growth processes. Pp. 393-426 in Ferroelectric Thin-Films: Synthesis and Basic Properties, C. Paz de Araujo, J.F. Scott, and G.W. Taylor (eds). Reading, U.K.: Gordon and Breach Publishers.


Barth, P. 1995. Presentation to the Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems at the National Research Council, Washington, D.C., on December 11, 1995.

Barth, P.W., S.L. Bernard, and J.B. Angell. 1985. Flexible circuit and sensor arrays fabricated by monolithic silicon technology. IEEE Transactions on Electron Devices 32(7): 1202-1205.

Baughmann, R.H., L.W. Schacklette, R.L. Elsenbaumer, E.J. Plichta, and C. Becht. 1991. Microelectromechanical actuators based on conducting polymers. Pp. 267-289 in Molecular Electronics: Materials and Methods, P.I. Lazarev (ed). Dordrecht, Netherlands: Kluwer Academic Publishers.

Beadle, W.E., J.C.C. Tsai, and R.D. Plummer (eds). 1985. Quick Reference Manual for Silicon Integrated Circuit Technology. New York: John Wiley and Sons. Beatty, C.C. 1996. A chronology of thermal ink-jet structures. Pp. 200-204 in Technical Digest from the Solid-State Sensor and Actuator Workshop held June 2-6, 1996, on Hilton Head Island, South Carolina. Cleveland, Ohio: Transducer Research Foundation.

Becker, E.W., W. Ehrfeld, P. Hagmann, A. Maner, and D. Munchmeyer. 1986. Fabrication of microstructures with high aspect ratios and great structural heights by synchrotron radiation lithography, galvanoforming, and plastic moulding (LIGA process). Microelectronic Engineering 4(1): 35-56.

Beebe, D.J., and D.D. Denton. 1994. Flexible polyimidebased package for silicon sensors. Sensors and Actuators A 44(1): 57-64.

Beerschwinger, U., N.G. Milne, S.J. Yang, R.L. Reuben, A.J. Sangster, and H. Ziad. 1994. Coupled electrostatic and mechanical FEA of a micromotor. Institute of Electrical and Electronics Journal of Microelectromechanical Systems 3(4): 162-171.

Broenink, J., J. Bekkink, and P.C. Breedveld. 1992. Multibond-graph version of the CAMAS modeling and simulation environment. Pp. 253-262 in Bond Graphs for Engineers, P.C. Breedveld and G. Dauphin-Tanguy (eds). Amsterdam: North-Holland.

Busch, J.D., A.D. Johnson, and C.H. Lee. 1990. Shape-memory properties in Ni-Ti sputter-deposited film. Journal of Applied Physics 68: 6224-6228.


Claeyssen, F., N. Lhermet, R. LeLetty, and L. Chouteau. 1996. A new resonant magnetorestrictive rotating motor. Pp. 272-274 in Actuators 96, H. Borgmann (ed). Bremen, Germany: AXON Technologie Consult GmbH.

Cohn, M.B., Y. Liang, R.T. Howe, and A.P. Pisano. 1996. Wafer-to-wafer transfer of microstructures for vacuum packaging. Pp. 32-35 in Technical Digest from the Solid- State Sensor and Actuator Workshop held June 2-6, 1996, on Hilton Head Island, South Carolina . Cleveland, Ohio: Transducer Research Foundation.

Crary, S., O. Juma, and Y. Zhang. 1991. Software tools for designers of sensor and actuator CAE systems. Pp. 498-501 in Digest of Technical Papers from the Institute of Electrical and Electronics Engineers International Conference on Solid-State Sensors and Actuators (Transducers '91) held June 23-27, 1991, in San Francisco, California. New York: Institute of Electrical and Electronics Engineers.


Daneman, M.J., N.C. Tien, O. Solgaard, A.P. Pisano, K.Y. Lau, and R.S. Muller. 1995. Linear microvibromotor for positioning optical components. Pp. 55-60 in Proceedings of Institute of Electrical and Electronics Engineers International

Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×

Workshop on Micro Electro Mechanical Systems (MEMS '95) held January 29-February 2, 1995, in Amsterdam, Netherlands. New York: Institute of Electrical and Electronics Engineers.

Della Santa, A., A. Mazzoldi, D. De Rossi, T. Gerlach, M. Kloepzig, and T. Hofman. 1996. Conducting polymer flexural elements for micropump driving. Pp. 96-99 in Proceedings of the 5th International Conference on New Actuators (Actuators '96) held June 26-28, 1996, in Bremen, Germany. Bremen: AXON Technologie Consult GmbH.

Egert, C., and D. Felde. 1995. A Design and Review for Two LIGA Fabricated Micro-Devices: Quarterly Report of the Regional Technology Alliance for High Aspect Ratio MEMS Manufacturing. Presentation to the Technology Reinvestment Program Board at the Defense Advanced Research Projects Agency, Arlington, Virginia, on December 14, 1995.

Ehrfeld, W., and H. Lehr. 1995. Deep x-ray lithography for the production of three-dimensional microstructures from metals, polymers and ceramics. Radiation Physics and Chemistry 45(3): 349-365.

Esashi, M., and Y. Matsumoto. 1991. Common two lead wires sensing system. P. 1089 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '91) held June 24-27, 1991, in San Francisco, California. New York: Institute of Electrical and Electronics Engineers.


Fleischman, A.J., S. Roy, C.A. Zorman, M. Mehregany, and L.G. Matus. 1996. Polycrystalline silicon carbide for surface micromachining. P. 234 in Proceedings of the Institute of Electrical and Electronics Engineers International Workshop on Micro Electro Mechanical Systems (MEMS '96) held February 11-15, 1996, in San Diego, California. New York: Institute of Electrical and Electronics Engineers.


Gilbert, J.R., P.M. Osterberg, R.M. Harris, D.O. Ouma, X. Cai, A. Pfajfer, J. White, and S.D. Senturia. 1993. Implementation of a MEMCAD system for electrostatic and mechanical analysis of complex structures from mask descriptions. Pp. 207-212 in Proceedings of the Institute of Electrical and Electronics Engineers International Workshop on Micro Electro Mechanical Systems (MEMS '93) held February 7-10, 1993, in Fort Lauderdale, Florida. New York: Institute of Electrical and Electronics Engineers.

Guckel, H. 1996. U.S. Patent No. 5,378,583.

Guckel, H., J. Uglow, M. Lin, D. Denton, J. Tobin, K. Euch, and M. Juda. 1988. Plasma polymerization of methyl methacrylate: A photoresist for 3D applications. Pp. 9-12 in Technical Digest of the Institute of Electrical and Electronics Engineers Solid-State Sensor and Actuator Workshop held June 6-9, 1988, on Hilton Head Island, South Carolina. New York: Institute of Electrical and Electronics Engineers.

Guckel, H., J.J. Sniegowski, T.R. Christenson, S. Mohney, and T.F. Kelly. 1989. Fabrication of micromechanical devices from polysilicon films with smooth surfaces. Sensors and Actuators 20(1-2): 117-122.

Guckel, H., T.R. Christenson, K.J. Skrobis, J. Klein, and M. Karnowsky. 1993. Design and testing of planar magnetic micromotors fabricated by deep x-ray lithography and electroplating. Pp. 76-79 in Proceedings of the International Conference on Solid-State Actuators held June 7- 10, 1993, in Yokahama, Japan. Yokohama, Japan: Institute of Electrical Engineers.

Guckel, H., T.R. Christenson, T. Earles, and J. Klein. 1994. Laterally driven electromagnetic actuators. Pp. 49-52 in Technical Digest from the Solid-State Sensor and Actuator Workshop held June 13-16, 1994, on Hilton Head Island, South Carolina. Cleveland Heights, Ohio: Transducer Research Foundation .

Guckel, H., T.R. Christenson, J. Klein, T. Earles, and S. Massoud-Ansari. 1996a. Micro electromagnetic actuators based on deep x-ray lithography. Pp. 21-24 in Proceedings of the 7th International Symposium on Microsystems, Intelligent Materials and Robots held September 27-29, 1995, in Sendai, Japan. Sendai, Japan: Tohoku University.

Guckel, H., P.S. Mangat, H. Emmerich, S. Massoud-Ansari, J. Klein, T. Earles, J.D. Zook, T. Ohnstein, E.D. Johnson, D.P. Siddons, and T.R. Christenson. 1996b. Advances in photoresist based processing tools for three-dimensional precision and micromechanics. Pp. 60-63 in Technical Digest from the Solid-State Sensor and Actuator Workshop held June 2-6, 1996, on Hilton Head Island, South Carolina. Cleveland, Ohio: Transducer Research Foundation.


Hathaway, K.B., and A.E. Clark. 1993. Magnetostrictive materials. MRS Bulletin 18(4): 34-41.

Hayashi, S., N. Ishikawa, and C. Jiordana. 1993. High moisture permeability polyurethane for textile applications. Journal of Coated Fabrics 23: 74-83.

Herbert, J.M. 1985. Ceramic Dielectrics and Capacitors. New York: Gordon and Breach Science Publishers.

Hornbeck, L.J. 1995. Digital Light ProcessingTM and MEMS: Timely Convergence for a Bright Future. Paper presented at the SPIE Micromachining and Microfabrication '95 Conference on October 23, 1995, in Austin, Texas.

Hornbeck, L.J. 1996. DMD Manufacturing Technology. Presentation to the Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems at the Beckman Center of the National Research Council in Irvine, California, on February 10, 1996.

Hornbeck, L.J. 1997. Digital Light ProcessingTM for High- Brightness, High-Resolution Applications. Paper presented at the SPIE Electronic Imaging (EI '97) Conference on February 11, 1997, in San Jose, California.

Houston, M.R., R. Maboudian, and R.T. Howe. 1995. Ammonium fluoride anti-stiction surface treatments for

Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×

polysilicon microstructures. P. 45 in Digest of Technical Papers from the 8th International Conference on Solid-State Sensors and Actuators (Transducers '95/Eurosensors IX) held June 25-29, 1995, in Stockholm, Sweden. Stockholm: Foundation for Sensor and Actuator Technology.

Judy, J.W., and R.S. Muller. 1996. Batch-fabricated, addressable, magnetically actuated microstructures. Pp. 187-190 in Technical Digest from the Solid-State Sensor and Actuator Workshop held June 2-6, 1996, on Hilton Head Island, South Carolina. Cleveland, Ohio: Transducer Research Foundation.


Keller, C.G., and M. Ferrari. 1994. Milli-scale polysilicon structures. Pp. 132-137 in Technical Digest from the Solid State Sensor and Actuator Workshop held June 13-16, 1994, on Hilton Head Island, South Carolina. Cleveland, Ohio: Transducer Research Foundation.

Keller, C.G., and R.T. Howe. 1995. HEXSIL bimorphs for vertical actuation. Pp. 99-102 in Digest of Technical Papers from the 8th International Conference on Solid-State Sensors and Actuators (Transducers '95) held June 25-29, 1995, in Stockholm, Sweden. Stockholm: Foundation for Sensor and Actuator Technology.

Keller, C.G., and R.T. Howe. 1997. HEXSIL tweezers for teleoperated micro-assembly. Pp. 72-77 in Proceedings of the 10th International Workshop on Micro Electro Mechanical Systems (MEMS '97) held on January 26-30, 1997, in Nagoya, Japan. New York: Institute of Electrical and Electronics Engineers.

Klaassen, E.H., K. Petersen, J.M. Noworolski, J. Logan, N.I. Maluf, J. Brown, C. Storment, W. McCulley, and G.T.A. Kovacs. 1995. Silicon fusion bonding and deep reactive ion etching: A new technology for microstructures. Pp. 556-559 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '95) held June 25-29, 1995, in Stockholm, Sweden. Stockholm: Foundation for Sensor and Actuator Technology.

Klumpp, L.U., U. Schaber, H.L. Offereins, K. Kuhl, and H. Sandmeier. 1994. Amorphous silicon carbide and its application in silicon micromachining. Sensors and Actuators A 41(1-3): 310-316.

Ko, W.H., J.T. Suminto, and G.J. Yeh. 1985. Bonding techniques for microsensors . Pp. 41-62 in Micromachining and Micropackaging of Transducers, C.D. Fung, P.W. Cheung, W.H. Ko, and D.G. Fleming (eds). New York: Elsevier Science Publishers.

Kumar, A., N.L. Abbott, E. Kim, H.A. Biebuyck, E. Kim, and G.M. Whitesides. 1995. Patterned self-assembled monolayers and meso-scale phenomena. Accounts of Chemical Research 28(5): 219-226.

Kuribayashi, K. 1986. A new actuator of a joint mechanism using TiNi alloy wire. International Journal of Robotics Research 4(4): 47-58.


Lal, A., and R. White. 1997. Optimization of silicon longitudinal-mode ultrasonic actuators, with application to surgery. Pp. 57-60 in Digest of Technical Papers from the 9th Institute of Electrical and Electronics Engineers International Conference on Solid-State Sensors and Actuators (Transducers '97) held June 16-19, 1997, in Chicago, Illinois. New York: Institute for Electrical and Electronics Engineers.

Lanzillotto, A.-M., T.-S. Leu, M. Amabile, R. Wildes, and J. Dunsmuir. 1996. An investigation of microstructure and microdynamics of fluid flow in MEMS. Pp. 789-796 in Proceedings of the American Society of Mechanical Engineers Aerospace Division held November 17-22, 1996, in Atlanta, Georgia. New York: American Society of Mechanical Engineers.

Lee, A.P., A.P. Pisano, and D.J. Nikkel Jr. 1993. Polysilicon linear microvibromotors. Pp. 46-49 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '93) held June 7-10, 1993 in Yokohama, Japan. Yokohama, Japan: Institute of Electrical Engineers.

Liang, C., C.A. Rogers, and E. Malafeew. 1991. Preliminary investigation of shape memory polymers and their hybrid composites. Pp. 97-105 in Smart Structures and Materials: Proceedings of the Winter Annual Meeting of the American Society of Mechanical Engineers held December 1, 1991, in Atlanta, Georgia. New York: American Society of Mechanical Engineers.

Limb, S.J., C.B. Labelle, K.K. Gleason, D.J. Edell, and E.F. Gleason. 1996. Growth of fluorocarbon polymer thin-films with high CF2 fractions and low dangling bond concentrations by thermal chemical-vapor-deposition. Applied Physics Letters 68(20): 2810-2812.


Mallon, J., J. Bryzek, J. Ramsey, G. Tomblin, and F. Pourahmadi. 1988. Low-cost, high-volume packaging techniques for silicon sensors and actuators. Pp. 123-126 in Technical Digest from the Institute of Electrical and Electronics Engineers Solid-State Sensor and Actuator Workshop held June 6-9, 1988, on Hilton Head Island, South Carolina. New York: Institute of Electrical and Electronics Engineers.

Mansingh, A. 1990. Fabrication and applications of piezoelectric and ferroelectric films. Ferroelectrics 102: 69-84.

Markus, K.W., D. Koester, and V. Dhuler. 1994. MEMS infrastructure: Multi-user access and smart MEMS. P. 207 in Proceedings of the 1994 Government Microcircuit Applications Conference (GOMAC) held November 7-10, 1994, in San Diego, California. New York: Palisades Institute.

Markus, K.W., V.R. Dhuler, R. Mahadevan, A. Cowen, and A. Shishkoff. 1996. Integration of MUMPs and electronics for system prototyping. Pp. 112-122 in Proceedings of SPIE Smart Structures and Materials 1996. Smart Electronics and MEMS, vol. 2722, V.K. Varadan and P.J.

Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×

McWhorter (eds). Bellingham, Washington: The International Society of Optical Engineering.

Martin, D.C., T. Jiang, and C.J. Buchko. 1997. Processing and characterization of protein polymers. Pp. 339-370 in Protein-Based Materials, K. McGrath and D. Kaplan (eds). Boston: Birkhauser.

Mastrangelo, C.H., R.S. Muller, and S. Kumar. 1991. Microfabricated incandescent lamps. Applied Optics 30(7): 868-873.

Miyazaki, S. 1990. Thermal and stress cycling effects and fatigue properties of Ti-Ni alloys. P. 394-413 in Engineering Aspects of Shape Memory Alloys, T.W. Duerig, K.N. Melton, D. Stockel, and C.M. Wayman (eds). London: Butterworth-Heinemann.

Mohr, J., W. Ehrfeld, and D. Munchmeyer. 1988. Requirements on resist layers in deep-etch synchrotron radiation lithography. Journal of Vacuum Science Technology B 6(6): 2264-2267.

Mueller, G. 1993. SiC as a new sensor material. Pp. 948-953 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '93) held June 7-10, 1993, in Yokohama, Japan. Yokohama, Japan: Institute of Electrical Engineers.

Najafi, K., and K.D. Wise. 1986. An implantable multielectrode array with on-chip signal processing. Institute of Electrical and Electronics Engineers Journal of Solid-State Circuits SC-21(6): 1035-1044.

Nakamura, Y., S. Nakamura, L. Buchaillot, and H. Fujita. 1997. A three-dimensional shape memory alloy loop actuator. Pp. 262-266 in Proceedings of the Institute of Electrical and Electronics Engineers International Workshop on Micro Electro Mechanical Systems (MEMS '97) held January 26-30, 1997, in Nagoya, Japan. New York: Institute of Electrical and Electronics Engineers.

National Research Council. 1990. Materials for High-Density Electronic Packaging and Inter-Connection. Washington, D.C.: National Academy Press.


Petersen, K. 1995. MEMS: What lies ahead? P. 227 in Digest of Technical Papers from the 8th International Conference on Solid-State Sensors and Actuators (Transducers '95) held June 25-29, 1995, in Stockholm, Sweden. Stockholm: Foundation for Sensor and Actuator Technology.

Petersen, K. 1996. Don't commercialize MEMS. Paper presented at the SEMI (Semiconductor Equipment and Materials International) and Engineering Foundation Conference on the Commercialization of Microsystems held October 6-11, 1996, in Kona, Hawaii.

Petersen, K., P. Barth, J. Poydock, J. Brown, J. Mallon, Jr., and J. Bryzek. 1988. Silicon fusion bonding for pressure sensors. Pp. 144-147 in Technical Digest from the Institute of Electrical and Electronics Engineers Solid-State Sensor and Actuator Workshop held on June 6-9, 1988, on Hilton Head Island, South Carolina. New York: Institute of Electrical and Electronics Engineers.

Pister, K.S.J., M.W. Judy, S.R. Burgett, and R.S. Fearing. 1992. Microfabricated hinges. Sensors and Actuators A 33(3): 249-256.

Polla, D.L., and L.F. Francis. 1996. Ferroelectric thin-films in microelectromechanical systems applications. MRS Bulletin 21(7): 59-65.


Quandt, E., B. Gerlach, and K. Seemann. 1994. Preparation and applications of magnetostrictive thin-films. Journal of Applied Physics 76(10): 7000-7002.


Ristic, L., R. Guttridge, J. Kung, D. Koury, B. Dunn, and H. Zunino. 1993. A capacitive type accelerometer with self test feature based on a double-pinned polysilicon structure. Pp. 811-813 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '93) held June 7-10, 1993, in Yokohama, Japan. Yokohama, Japan: Institute of Electrical Engineers.

Rogge, B., J. Schulz, J. Mohr, and A. Thommes. 1996. Magnetic microactuators fabricated by the LIGA-technique for large displacements or large forces. Pp. 112-115 in Actuators '96, H. Borgmann (ed). Bremen, Germany: AXON Technologie Consult GmbH.

Roy, R.A., K.F. Etzold, and J.J. Cuomo. 1990. Ferroelectric film synthesis, past and present: A select review. Pp. 141-152 in Proceedings of the Ferroelectric Thin-Films Symposium held April 16-20, 1990, in San Francisco, California. Pittsburgh: Materials Research Society.

Roylance, L., and J. Angell. 1979. A batch-fabricated silicon accelerometer. Institute of Electrical and Electronics Engineers Transactions on Electron Devices 26(12): 1911- 1917.


Senturia, S.D. 1995. CAD for microelectromechanical systems. Pp. 5-8 in Digest of Technical Papers from the 8th International Conference on Solid-State Sensors and Actuators (Transducers '95/Eurosensors IX) held June 25- 29, 1995, in Stockholm, Sweden. Stockholm: Foundation for Sensor and Actuator Technology.

Senturia, S.D., R.M. Harris, B.P. Johnson, S. Kim, K. Nabors, M.A. Shulman, and J.K. White. 1992. A computer-aided design system for microelectromechanical systems. Institute of Electrical and Electronics Engineers Journal on Microelectromechanical Systems 1(1): 3-13.

Skrobis, K.J., J.W. Taylor, and R.L. Engelstad. 1995. Bond mechanisms and bond strengths of solvent-welded PMMA sheets for use as deep x-ray resist in LIGA-type processing. Pp. 337-346 in Proceedings of the 188th Meeting of the Electrochemical Society held October 8-13, 1995, in Chicago, Illinois. Chicago: The Electrochemical Society.

Sniegowski, J., S. Miller, G. LaVigne, M. Rodgers, and P. McWorter. 1996. Monolithic geared mechanisms driven by a polysilicon surface micromachined on-chip electrostatic microengine. Pp. 178-182 in Technical Digest from the Institute of Electrical and Electronics Engineers Solid State Sensor and Actuator Workshop held on June 3-5,

Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×

1996, on Hilton Head Island, South Carolina. New York: Institute of Electrical and Electronics Engineers.

Solgaard, O., M. Daneman, N. Tien, A. Friedberger, R. Muller, and K. Lau. 1995. Optoelectronic packaging using silicon surface micromachined alignment mirrors. Institute of Electrical and Electronics Engineers Photonics Technology Letters 7(1): 41-43.

Spangler L.C., and C.J. Kemp. 1995. ISAAC: Integrated silicon automotive accelerometer. Pp. 585-588 in Digest of Technical Papers from the 8th International Conference on Solid-State Sensors and Actuators (Transducers '95/Eurosensors IX) held June 25-29, 1995, in Stockholm, Sweden. Stockholm: Foundation for Sensor and Actuator Technology.

Tai,Y.-C. 1996. MEMS at Caltech. Presentation to the Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems at the Beckman Center in Irvine, California, on February 10, 1996.

Tang, W.C., T.C.H. Nguyen, M.W. Judy, and R.T. Howe. 1990. Electrostatic-comb drive of lateral polysilicon resonators. Sensors and Actuators A 21(1-3): 328-331.

Tobushi, H., H. Hara, E. Yamada, and S. Hayashi. 1996. Thermomechanical properties of shape memory polymer of polyurethane series and their applications. Pp. 362-365 in Actuators '96, H. Borgmann (ed). Bremen, Germany: AXON Technologie Consult GmbH.


Verhofstadt, P.W.J. 1976. Evaluation of technology options for LSI processing elements. Proceedings of the Institute of Electrical and Electronics Engineers 64(6): 842-851.


Wachutka,G. 1995. Tailored modeling: A way to the "virtual microtransducer fab"? Sensors and Actuators A 47(1-3): 603-612.

Walker, J.A., K.J. Gabriel, and M. Mehregany. 1990. Thin-film processing of TiNi shape memory alloy. Sensors and Actuators A 21(1-3): 243-246.

Walsh, S., and E. Schumann. 1994. MEMS and micromachining: Emerging markets for SEMI members. Paper presented at the SEMI (Semiconductor Equipment and Materials International) Industry Strategy Symposium, Monterey Bay, California, January 5-8, 1994.

Wayman, C.M. 1993. Shape memory alloys. MRS Bulletin 18(4): 49-56.

Wise, K.D. 1995. A Microinstrumentation Cluster for Environmental Monitoring: Semi-Annual Report. ARPA Contract J-FBI-92-149. Ann Arbor, Mich.: Center for Integrated Sensors and Circuits, University of Michigan.

Wur, D.R., J.L. Davidson, W.P. Kang, and D. Kinser. 1993. Fabrication and characterization of a doped polycrystalline diamond film (PDF) for strain sensing applications. Pp. 722-725 in Digest of Technical Papers from the International Conference on Solid-State Sensors and Actuators (Transducers '93) held June 7-10, 1993, in Yokohama, Japan. Yokohama, Japan: Institute of Electrical Engineers.


Xia, Y. N., E. Kim, M. Mrksich, and G.M. Whitesides. 1996. Microcontact printing of alkanethiols on copper and its application in microfabrication. Chemistry of Materials 8(3): 601-603.


Yamashita, S., J. Yamasaki, M. Ikeda, and N. Iwabuchi. 1991. Anisotropic Nd-Fe-B thin-film magnets for milli-size motor. Journal of Applied Physics 70(10): 6627-6629.

Yasuda, H. 1985. Plasma Polymerization. Orlando, Fla.: Academic Press.

Yeh, H.-J., and J.S. Smith. 1994. Fluidic self assembly of microstructures and its application to the integration of GaAs on Si. Pp. 279-284 in Proceedings of the Institute of Electrical and Electronics Engineers International Workshop on Micro Electro Mechanical Systems (MEMS '94) held January 25-28, 1994, in Oiso, Japan. New York: Institute of Electrical and Electronics Engineers.


Zdeblick, M. 1996. Presentation to the Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems at the National Research Council, Washington, D.C., on April 18, 1996.

Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×
This page in the original is blank.
Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×
Page 51
Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×
Page 52
Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×
Page 53
Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×
Page 54
Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×
Page 55
Suggested Citation:"References." National Research Council. 1997. Microelectromechanical Systems: Advanced Materials and Fabrication Methods. Washington, DC: The National Academies Press. doi: 10.17226/5977.
×
Page 56
Next: Appendix A: World Wide Web Sites on MEMS »
Microelectromechanical Systems: Advanced Materials and Fabrication Methods Get This Book
×
Buy Paperback | $47.00 Buy Ebook | $37.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Microelectromenchanical systems (MEMS) is a revolutionary field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. The silicon-based integrated circuits process is so highly refined it can produce millions of electrical elements on a single chip and define their critical dimensions to tolerances of 100-billionths of a meter. The MEMS revolution harnesses the integrated circuitry know-how to build working microsystems from micromechanical and microelectronic elements. MEMS is a multidisciplinary field involving challenges and opportunites for electrical, mechanical, chemical, and biomedical engineering as well as physics, biology, and chemistry. As MEMS begin to permeate more and more industrial procedures, society as a whole will be strongly affected because MEMS provide a new design technology that could rival—perhaps surpass—the societal impact of integrated circuits.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!