References
AAPM (American Association of Physicists in Medicine). 1993. Specification and Acceptance Testing of Computed Tomography Scanners. Report No. 39 . College Park, Md.: American Institute of Physics.
ASTM (American Society for Testing and Materials). 1993. Design and Use of Ionizing Radiation Equipment for the Detection of Items Prohibited in Controlled Access Areas. F792-88. West Conshohocken, Pa.: American Society for Testing and Materials.
Blanchard, B.S. 1986. Logistics Engineering and Management, 3rd ed. Englewood Cliffs, N.J.: Prentice-Hall.
Buckley, F.J. 1993. Implementing Configuration Management: Hardware, Software, and Firmware. Piscataway, N.J.: IEEE Press.
Burrows, C., S. Dart, and G.W. George. 1996. Ovum Evaluates Configuration Management Tools. London, U.K.: Ovum Press.
DOD (U.S. Department of Defense). 1963. Quality Program Requirements. MIL-Q-9858A. Washington D.C.: U.S. Department of Defense.
DOD. 1994. Software Development and Documentation. MIL-STD-498. Washington, D.C.: U.S. Department of Defense.
DOD. 1995. Configuration Management. MIL-STD-973. Washington, D.C.: U.S. Department of Defense.
FAA (Federal Aviation Administration). 1993. Management Plan for Explosives Detection System Certification Testing. Washington, D.C.: Federal Aviation Administration.
FAA. 1995. Technical Center Baggage Inspection System: Airport Operational Demonstration Project Test and Evaluation Master Plan. Washington, D.C.: Federal Aviation Administration.
FAA. 1996. The FAA Type Certification Process. Washington, D.C.: Federal Aviation Administration.
FAA. 1997a. Summary of Trace Testing Methodology in Support of the Security Equipment Integrated Product Team. Washington, D.C.: Federal Aviation Administration.
FAA. 1997b. Metal Detector Calibration/Certification Procedures for Course #00032. Washington, D.C.: Federal Aviation Administration.
Feigenbaum, A.V. 1983. Total Quality Control, 3rd ed. New York: McGraw-Hill.
Gray, J.E., K.G. Lisk, D.H. Haddick, J.H. Harshbarger, A. Oosterhof, and R. Schwenker. 1985. Test pattern for video displays and hard-copy cameras. Radiology 154: 519-527.
ICRU (International Commission on Radiation Units and Measurements). 1995. Medical Imaging: The Assessment of Image Quality. Report 54. Bethesda, Md.: International Commission on Radiation Units and Measurements.
ISO (International Organization for Standardization). 1994. ISO 9001, Quality Systems: Model for Quality Assurance in Design, Development, Production, Installation, and Servicing, 2nd ed. Geneva, Switzerland: International Organization for Standardization.
NATO (North Atlantic Treaty Organization). 1993a. NATO Quality Assurance Requirements for Inspection. Allied Quality Assurance Publication 130. Philadelphia, Pa.: Navy Publishing and Printing Office.
NATO. 1993b. NATO Quality Assurance Requirements for Final Inspection. Allied Quality Assurance Publication 131. Philadelphia, Pa.: Navy Publishing and Printing Office.
NRC (National Research Council). 1993. Detection of Explosives for Commercial Aviation Security. National Materials Advisory Board. Washington, D.C.: National Academy Press.
NRC. 1996. Airline Passenger Security Screening: New Technologies and Implementation Issues. National Materials Advisory Board. Washington, D.C.: National Academy Press.
OTA (Office of Technology Assessment, U.S. Congress). 1991. Technology against Terrorism: The Federal Effort. Washington, D.C.: Office of Technology Assessment.
OTA. 1992. Technology against Terrorism: Structuring Security. Washington, D.C.: Office of Technology Assessment.
President's Commission on Aviation Security and Terrorism. 1990. Report to the President, May 15. Washington, D.C.
Radio Technical Commission for Aeronautics. 1992. Software Considerations in Airborne Systems and Equipment Certification. Washington, D.C.: Radio Technical Commission for Aeronautics.
White House Commission on Aviation Safety and Security. 1996. Initial Report to the President, September 9. Washington, D.C.: Available on the internet: http://www.aviationcommission.dot.gov
White House Commission on Aviation Safety and Security. 1997. Final Report to the President, February 12. Washington, D.C. Available on the internet: http://www.aviationcommission.dot.gov
