Acronyms


ADL

A.D. Little

ANL

Argonne National Laboratory

AIPM

automotive integrated power module


BIW

body-in-white


CAFE

corporate average fuel economy

CARAT

Cooperative Automotive Research for Advanced Technologies

CARB

California Air Resources Board

CFRP

carbon fiber-reinforced polymer

CIDI

compression-ignition direct-injection

CO

carbon monoxide

CRADA

cooperative research and development agreement


DIATA

direct-injection, aluminum-block, through-bolt

DOE

U.S. Department of Energy


EE

electrical and electronic power systems team

EPA

Environmental Protection Agency


FTP

federal test procedure


GDI

gasoline direct injection

GM

General Motors Corporation



The National Academies | 500 Fifth St. N.W. | Washington, D.C. 20001
Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement



Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.

OCR for page 110
--> Acronyms ADL A.D. Little ANL Argonne National Laboratory AIPM automotive integrated power module BIW body-in-white CAFE corporate average fuel economy CARAT Cooperative Automotive Research for Advanced Technologies CARB California Air Resources Board CFRP carbon fiber-reinforced polymer CIDI compression-ignition direct-injection CO carbon monoxide CRADA cooperative research and development agreement DIATA direct-injection, aluminum-block, through-bolt DOE U.S. Department of Energy EE electrical and electronic power systems team EPA Environmental Protection Agency FTP federal test procedure GDI gasoline direct injection GM General Motors Corporation

OCR for page 110
--> GFRP glass fiber-reinforced polymer HEV hybrid electric vehicle IFC International Fuel Cell Company IGT Institute of Gas Technology LANL Los Alamos National Laboratory LEV low-emission vehicle LLNL Lawrence Livermore National Laboratory MEA membrane-electrode assembly NOx nitrogen oxides NVH noise, vibration and harshness OAAT Office of Advanced Automotive Technology (U.S. Department of Energy) ORNL Oak Ridge National Laboratory PEM proton exchange membrane PNGV Partnership for a New Generation of Vehicles PNNL Pacific Northwest National Laboratory POX partial oxidation ppm parts per million PrOx preferential oxidation R&D research and development RFP request for proposal SBIR Small Business Innovative Research SCAQMD South Coast Air Quality Management District SIDI spark-ignited direct-injection SNL Sandia National Laboratory SOC state of charge SULEV super ultra LEV SWRI Southwest Research Institute ULEV ultralow emission vehicle USAMP United States Automotive Materials Partnership USCAR United States Council for Automotive Research UTC United Technologies Corporation 4SDI four-stroke direct-injection