Schetky, L., C. Lei, B.M. Steinetz, and J.T. Sublett. 1998. Shape Memory Alloy Adaptive Control of Gas Turbine Engine Compressor Blade Clearance. P. 9, Proceedings of the AIAA/ASME/SAE/ ASEE Joint Propulsion Conference and Exhibit. AIAA Paper 98-3286. Washington, D.C.: American Institute of Aeronautics and Astronautics.

Seifert, A., S. Eliahu, D. Greenblatt, and I. Wygnanski. 1998. Use of piezoelectric actuator for airfoil separation control. AIAA Journal 36(8): 1535–1537.

Selig, M.S., and J.J. Guglielmo. 1994. High-lift low Reynolds number airfoil design. Presentation at the AIAA 12th Applied Aerodynamics Conference, Colorado Springs, Colorado, June 20–22, 1994.

Smith, B.B., and A. Glezer. 1998. The formation and evolution of synthetic jets. Physics of Fluids 10(1): 2281–2297.

Srolovitz, D.J. 1998. Computational Materials Science and Engineering. Presentation at the Workshop on Structural Materials Advances, National Research Council, Washington, D.C., March 16–17, 1998.

Stedman, J. 1997. Fuel Cell Power for Uninhabited Vehicles. Presentation at the DARPA/ Defense Science Office-Defense Sciences Research Council Meeting, July 16, 1997, La Jolla, California.

Stein, G., S. Banda, J. Doyle, R. Murray, J. Paduano, and J. Speyer. 1997. Research Needs in Dynamics and Control for UAVs. Unpublished conclusions of an Air Force of Scientific Research (AFOSR) sponsored workshop, Los Angeles, California, August 21–22, 1997. Available on line at:

Theibert, L.S., and L. Semiatin. 1998. Future Challenges in Airframe Materials. Presentation at the Workshop on Structural Materials Advances, National Research Council, Washington, D.C., March 16–17, 1998.

Tracy, R., I. Kroo, I. Kuhn, J. Chase, G. Baum, I. Gilchrist, and J. Viken 1999. Affordable Supersonic Platform. Phase I. Final Review. Arlington, Va.: Directed Technologies, Inc.

USAFSAB (U.S. Air Force Scientific Advisory Board). 1995. New World Vistas: Air and Space Power for the 21st Century. Washington, D.C.: U.S. Air Force.

USAFSAB. 1996. UAV Technologies and Combat Operations. SAB TR-96-01. Washington, D.C.: U.S. Air Force.

USAFSAB. 1998. Going to Space: A Roadmap for Air Force Investment. Washington, D.C.: U.S. Air Force. Wakayama, S., M. Page, and R. Liebeck. 1996. Multidisciplinary Optimization on an Advanced Composite Wing. Pp. 184–190 in Proceedings of the 6th AIAA/USAF/NASA/ ISSMO Symposium on Multidisciplinary Analysis and Optimization. Reston, Va.: American Institue of Aeronautics and Astronautics.

Weisshaar, T., C. Nam, and A. Batista-Rodriguez. 1998. Aeroelastic Tailoring for Improved UAV Performance. AIAA Paper 98-1757. Presented at the 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Long Beach, California, April. 20–23, 1998.

Williamson, M. 1998. Naval UCAV. Presentation by CDR Michael Williamson, Navy Advanced Development Project Office, to the Committee on Materials, Structures, and Aeronautics for Advanced UAVs, National Research Council, Washington, D.C., February 19, 1998.

Zillmer, S. 1997. Integrated Multidisciplinary Optimization for Active Aeroelastic Wing (AAW) Design. Report WL-TR-97-3087. Dayton, Ohio: Air Force Research Laboratory.

The National Academies of Sciences, Engineering, and Medicine
500 Fifth St. N.W. | Washington, D.C. 20001

Copyright © National Academy of Sciences. All rights reserved.
Terms of Use and Privacy Statement