National Academies Press: OpenBook
« Previous: Manufacturing Skills Improvement
Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×

Bibliography

Ad Hoc Steering Committee for the Study of Research Applied to National Needs, Committee on Public Engineering Policy 1973 Priorities for Research Applicable to National Needs Washington, D.C. : National Academy of Engineering

American Society for Engineering Education—Committee on Evaluation of Engineering Education 1955 Report on Evaluation of Engineering Education Urbana, Ill. : ASEE June 15

Atherton, D. P. and Y. Sunahara eds. 1990 Control: Theory and Advanced Technology Tokyo, Japan : Mita Press

AT&T 1987 Product Realization AT&T Technical Journal 66 : (5)

Bailey, T. 1990 Changes in the Nature and Structure of Work: Implications for Skill Requirements and Skill Formation, National Center for Research in Vocational Education Berkeley, Calif. : University of California, Berkeley

Bohn, R. and R. Jaikumar 1989 The Dynamic Approach: An Alternative Paradigm for Operations Management Harvard Business School Working Paper No. 88011 Boston, Mass. : Revised August 1989

Boston University Manufacturing Roundtable 1988 Implementing manufacturing strategies: Breaking the performance measurement barriers Paper presented at an international conference commemorating the 75th anniversary of the School of Management October 20-21

Brand, S. 1987 The Media Lab: Inventing the Future at MIT New York, N.Y. : Viking Press

Carnevale, A. P. and J. W. Johnson 1989 Training America: Strategies for the Nation Washington, D.C. : American Society for Training and Development

Chaturvedi, A. R. 1986 Artificial Intelligence in Manufacturing: The State-of-the-Art Paper submitted to Digital Equipment Corporation,

Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×

Hudson, Massachusetts Milwaukee : University of Wisconsin-Milwaukee

Clark, K. R. Henderson and R. Jaikumar 1989 A Perspective on Computer Integrated Manufacturing Tools Harvard Business School Working Paper No. 88-048 Boston, Mass Revised January 1989

Commission on the Skills of the American Workforce 1990 America's Choice: High Skills or Low Wages Rochester, N.Y. : National Commission on Education and the Economy

Costello, R.B. 1988 Bolstering Defense Industrial Competitiveness: Preserving Our Heritage; The Industrial Base; Securing Our Future Report to the Secretary of Defense by the Under Secretary of Defense (Acquisition) July 1988

Cross-Disciplinary Engineering Research Committee and Manufacturing Studies Board—Task Force on Management of Technology 1987 Management of Technology: The Hidden Competitive Advantage Washington, D.C. : National Academy Press

Department of Defense Report on Science and Engineering Education Activities of the Department of Defense for the Committees on Armed Services, United States Congress March 1990

Dickson, D. Setting research goals not enough, says OECD Science 241 : 898

Federal Coordinating Council on Science, Engineering and Technology Annual Report March 1988

Feibus Michael 1988 Sematech Beckons Brightest: Engineers Going to Promised Land San Jose Mercury News March 14

Feigenbaum, E. P. McCorduck and H. P. Nii 1988 The Rise of the Expert Company New York, N.Y. : Times Books

Flynn, P. 1988 Facilitating Technological Change: The Human Resource Challenge Cambridge, Mass. : Ballinger Publishing

Glover, R.W. 1986 Apprenticeship Lessons from Abroad Columbus, Ohio : The Ohio State University National Center for Research in Vocational Education

Gone fishing. 1990 The Economist 314 : (January 6)

Grygo, G. 1990 Process control on verge of “New Age,” report says Digital Review January 8, 1990 (Based on recent Yankee Group report.)

Hirschhorn, L. 1984 Beyond Mechanization Cambridge, Mass. : MIT Press

Hulthage I. A. E. M. L. Farinacci M. S. Fox and M. D. Rychener 1990 The Architecture of ALADIN: A Knowledge Based Approach to Alloy Design IEEE Expert (August)

Imai, M. 1986 Kaizen—The Key to Japanese Competitive Success New York, N.Y. : Random House

Jahr Dale 1987 Corporate Wealth: More for the Little Guys The Wall Street Journal Wednesday, January 21

Jaikumar, R. 1986 Postindustrial Manufacturing Harvard Business Review (November-December) 69-76 Reprint No. 86606

Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×

Jaikumar, R. 1990 An architecture for a process control costing system Chapter 7 in Measures for Manufacturing Excellence, R. Kaplan Boston, Mass. : Harvard Business School Press

Jaikumar, R. and R. Bohn 1986 The Development of Intelligent Systems for Industrial Use: A Conceptual Framework Research on Technological Innovation, Management, and Policy 3 : 169-211 Boston, Mass. : JAI Press, Inc.

Japan Institute of Plant Maintenance Establishment of Reliability by TPM Adeka Argos Chemical Corporation, Mie Factory (1989 TPM Thesis Award Winning Paper)

Japan Institute of Plant Maintenance Foreseeing 21st Century Factory Operations Through TPM Tokai Dainippon Printing Corporation (1989 TPM Thesis Award Winning Paper)

Japan Institute of Plant Maintenance Market Adaptability and Competitive Environment Created by TPM Kubota Steel Corporation, Odawara Factory (1989 TPM Thesis Award Winning Paper)

Japanese Technology Evaluation Panel on Computer Integrated Manufacturing (CIM) and Computer Assisted Design (CAD) for the Semiconductor Industry in Japan 1988 Panel report

Johnston, W. B. and A. H. Packer 1987 Workforce 2000: Work and workers for the 21st century Hudson Institute

Kaplan, R. S. 1989 Management accounting for advanced technological environments Science 245 (August 25) : 819-823

Kaplan, R.S. 1986 Must CIM be justified by faith alone? Harvard Business Review 64(2) : 87-95

Kaplan, R. S. 1988 One cost system isn't enough Harvard Business Review 66(1) : 61-66

Koska, D. and Joseph R. 1988 Countdown to the Future: The Manufacturing Engineer in the 21st Century Profile 21: Executive Summary Dearborn, Mich. : Society of Manufacturing Engineers

Levine, M. 1980 High-Definition Television: Time to Take a Stand Testimony before the Subcommittee on Science, Research and Technology, Hearing on “New Directions in Home Video Technology, June 23

Lund, R. T. S. R. Rosenthal and T. Wachtell 1986 The Manufacturing Executives for the 1990s: Advanced Technology and New Management Skills Boston, Mass. : Boston University, Center for Technology and Policy

McKee, K. E. ed. 1987 Automated Inspection and Production Control: Proceedings of 8th International Conference, Springer-Verlag Bedford, U.K. : IFS Publications, Ltd.

Manufacturing Facilities Reliability Forum, Cleveland Engine Plants January 1990 Reliability and Maintainability Guidelines: The R&M Approach to Competitiveness Cleveland, Ohio : The Ford Motor Co.

Manufacturing Technology Information Analysis Center 1988 Computer Integrated Manufacturing: Concepts and Applications U.S.

Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×

Department of Defense Washington, D.C April 1988 Rock Island, Ill

Miller, J. G. and T. E. Vollmann 1985 The hidden factory Harvard Business Review 63(5) : 142-150

Murray, A. 1987 The Outlook: The Service Sector's Productivity Problem The Wall Street Journal February 9

Nakajima, S. 1988 Introduction to TPM: Total Productive Maintenance Cambridge, Mass. : Productivity Press Inc.

Nakajima, S. 1988 TPM Development Program: Implementing Total Productive Maintenance Cambridge, Mass. : Productivity Press Inc.

Nikkan K. Shimbun, Ltd. and Factory Magazine eds. 1988 Poka-yoke: Improving Product Quality by Preventing Defects Cambridge, Mass. : Productivity Press Inc.

National Academy of Engineering 1987 Infrastructure for the 21st Century: Framework for a Research Agenda Washington, D.C. : National Academy Press

National Academy of Engineering 1988 Design and Analysis of Integrated Manufacturing Systems Washington, D.C. : National Academy Press

National Academy of Engineering 1988 Technology in Services: Policies for Growth, Trade, and Employment Series on Technology and Social Priorities Washington, D.C. : National Academy Press

National Academy of Engineering—Committee on Career-Long Education for Engineers 1988 Focus on the Future: A National Action Plan for Career-Long Education for Engineers Washington, D.C. : National Academy Press

National Research Council—Committee on Design Theory and Methodology 1991 Improving Engineering Design: Designing for Competitive Advantage Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Continuing Education of Engineers Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Engineering Education and Practice in the United States: Foundations of Our Techno-Economic Future Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Engineering Employment Characteristics Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Engineering Graduate Education and Research Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Engineering Infrastructure Diagramming and Modeling Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utiliza-

Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×

tion of the Engineer 1985 Engineering in Society Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Engineering Technology Education Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Support Organizations for the Engineering Community Washington, D.C. : National Academy Press

National Research Council—Committee on the Education and Utilization of the Engineer 1985 Undergraduate Engineering Education Washington, D.C. : National Academy Press

National Research Council—Committee on Science, Engineering, and Public Policy 1988 Research Briefings 1987 Washington, D.C. : National Academy Press

National Research Council—Engineering Research Board 1987 Directions in Engineering Research: An Assessment of Opportunities and Needs Washington, D.C. : National Academy Press

National Research Council—Manufacturing Studies Board 1986 Toward a New Era in U.S. Manufacturing: The Need for a National Vision Washington, D.C. : National Academy Press

National Research Council—Manufacturing Studies Board 1988 The Future of Electronics Assembly: Report of the Panel on Strategic Electronics Manufacturing Technologies Washington, D.C. : National Academy Press

National Research Council—Manufacturing Studies Board and Cross-Disciplinary Engineering Research Committee 1986 Paper from a workshop on “A Framework for Understanding the Ingredients of an Intelligent Knowledge-Based Manufacturing System.”

National Research Council—Manufacturing Studies Board and Cross-Disciplinary Engineering Research Committee 1988 A Research Agenda for CIM: Information Technology Washington, D.C. : National Academy Press

National Science Foundation—Division of Science Based Development in Design, Manufacturing and Computer-Integrated Engineering 1988 Summary of Awards Fiscal Year 1987

Office of Technology Assessment 1983 Automation and the Workplace: A Technical Memorandum March 1983 Washington, D.C. : U.S. Government Printing Office

Office of Technology Assessment 1987 Computerized Manufacturing Automation: Employment, Education, and the Workplace Washington, D.C. : U.S. Government Printing Office

Pao, Y.-H. 1989 Adaptive Pattern Recognition and Neural Networks Reading Mass : Addison-Wesley

Pao, Y.-H. 1988 Engineering Artificial Intelligence Center for Automation and Intelligent Systems Research Technical Report TR88-107 Cleveland, Ohio : Case Western Reserve University February 1988

Pao, Y.-H. 1987 A Perspective on the Evolving Role of Artificial Intelli-

Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×

gence Technology in Manufacturing Center for Automation and Intelligent Systems Research Technical Report TR87-123 Cleveland, Ohio : Case Western Reserve University August 1987

Pao, Y.-H. and D. Sobajic 1989 Neural Net Technology for Interpretation and Management of Sensor Data Paper presented at Sensors Expo International, September 13, 1989, Cleveland, Ohio

Prasad, H. R. Total Productive Maintenance Forthcoming during 1991

Research Briefing Panel on Chemical Processing of Materials and Devices for Information Storage and Handling 1987 Panel report Washington, D.C. : National Academy Press

Richards, B. 1990 Wanting Workers Wall Street Journal Reports: Education (supplement) ( February 9)

Rosenfeld, S. E. Malizia and M. Dugan 1988 Reviving the Rural Factory: Automation and Work in the Rural South Research Triangle Park, N.C. : Southern Growth Policies Board

Schmandt, J. and R. Wilson 1990 Growth Policy in the Age of High Technology London, England : Unwin Hyman Press

Schonberger, R. J. 1982 Japanese Manufacturing Techniques New York, N.Y. : The Free Press

Senju, S. Concept and Technique of TPM Japan : Keio University, Engineering Department

Shingo, S. 1988 Non-Stock Production Cambridge, Mass. : Productivity Press Inc.

Society for Industrial and Applied Mathematics—Panel on Future Directions in Control Theory 1988 Future Directions in Control Theory: A Mathematical Perspective Philadelphia, Pa. : SIAM.

Society of Manufacturing Engineers 1980 CAD/CAM International Delphi Forecast Dearborn, Mich

Society of Manufacturing Engineers 1982 Directory of Manufacturing Research Needed by Industry Dearborn, Mich

Society of Manufacturing Engineers 1987 Fifth Generation Management for Fifth Generation Technology: A Round Table Discussion Dearborn, Mich

Society of Manufacturing Engineers 1985 Industrial Robots Forecast and Trends: A Second Edition Delphi Study Society of Manufacturing Engineers, Dearborn, and The University of Michigan, Ann Arbor, Mich

Taguchi, G. 1988 Introduction to Taguchi methods Engineering 228 : 1-2

Ultratech Stepper 1988 Research Issues in Deep Ultraviolet Lithography September 14

U.S. Air Force Deputy Chief of Staff/Technology and Requirements Planning 1988 The Air Force Science & Technology and Development Planning Program June 22

U.S. Air Force—Machine Tool Task Force 1980 Technology of Machine Tools Vols. 1-5

U.S. Air Force—Office of the Special Assistant for Reliability and Main-

Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×

tainability 1988 Acquisition Management: USAF R&M 200 Process Washington, D.C.

U.S. Air Force 1986 Project Forecast II, The Air Force Tomorrow Team: Executive Summary

U.S. Air Force Wright Aeronautical Laboratories 1985 Integrated Information Support System (IISS): An Evolutionary Approach to Integration

U.S. Congress, House of Representatives 1989 Creating the New Wealth: National Research and Development Funding in the 1990s Hearing before the Committee on Science, Space, and Technology, One Hundred First Congress, 1st Session, April 11-12, 1989 Washington, D.C. : U.S. Government Printing Office

U.S. Congress, Office of Technology Assessment 1987 International Competition in Services: Banking, Building, Software, Know-how Washington, D.C. : U.S. Government Printing Office

U.S. Congress, Office of Technology Assessment 1987 U.S. Service Industries Threatened by World Competition Washington, D.C. : U.S. Government Printing Office

Useem, E. 1986 Low Tech Education in a High Tech World New York, N.Y. : Free Press

VerDuin, W. 1990 Neural nets for custom formulation Proceedings of 19th Annual Programmable Controls/4th Annual Expert System/Industrial Process Control Conference, April 3, 1990, Engineering Society of Detroit Detroit, Mich

VerDuin, W. 1990 Neural nets: Software that learns by example Computer-Aided Engineering (January)

VerDuin, W. 1990 Neural network for diagnosis and control Journal of Neural Network Computing (Winter)

Wadley, H. N. G. and W. E. Eckart 1990 Intelligent Processing of Materials, Proceedings of the IMP Symposium held at the 1989 TMS Fall Meeting, Indianapolis, Indiana Warrendale, Pa. : The Metallurgical Society

Wadley, H. N. G. P. A. Parris B. B. Rath and S. M. Wolf 1987 Intelligent Processing of Materials and Advanced Sensors Warrendale, Pa. : The Metallurgical Society

Warner, M. 1984 Microprocessors, Manpower and Society New York, N.Y. : St. Martin's Press

Wireman, T. 1990 World Class Maintenance Management New York, N.Y. : Industrial Press Inc.

Wood, S. ed. 1988 The Transformation of Work? London, England : Unwin Hyman Press

Zuboff, S. 1988 In the Age of the Smart Machine: The Future of Work and Power New York, N.Y. : Basic Books

Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×
Page 140
Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×
Page 141
Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×
Page 142
Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×
Page 143
Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×
Page 144
Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×
Page 145
Suggested Citation:"Bibliography." National Research Council. 1991. The Competitive Edge: Research Priorities for U.S. Manufacturing. Washington, DC: The National Academies Press. doi: 10.17226/1618.
×
Page 146
Next: Appendix A: Selected Employment Data »
The Competitive Edge: Research Priorities for U.S. Manufacturing Get This Book
×
Buy Paperback | $45.00
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

To maintain competitiveness in the emerging global economy, U.S. manufacturing must rise to new standards of product quality, responsiveness to customers, and process flexibility. This volume presents a concise and well-organized analysis of new research directions to achieve these goals.

Five critical areas receive in-depth analysis of present practices, needed improvement, and research priorities:

  • Advanced engineered materials that offer the prospect of better life-cycle performance and other gains.
  • Equipment reliability and maintenance practices for better returns on capital investment.
  • Rapid product realization techniques to speed delivery to the marketplace.
  • Intelligent manufacturing control for improved reliability and greater precision.
  • Building a workforce with the multidisciplinary skills needed for competitiveness.

This sound and accessible analysis will be useful to manufacturing engineers and researchers, business executives, and economic and policy analysts.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!