National Academies Press: OpenBook
« Previous: Contents
Page 6
Suggested Citation:"List of Tables." National Academies of Sciences, Engineering, and Medicine. 2005. Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320. Washington, DC: The National Academies Press. doi: 10.17226/21969.
×
Page 6

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

LIST OF FIGURES Figure 1 Visual Representation of Analysis Technique ..........................................................6 Figure 2 Graphical Representation of Using Inner 75% of Data to Determine Invalid Data .................................................................................................................7 Figure 3 Graphical Representation of Using Inner 75% of Data to Determine Outliers....8 Figure 4 Repeatability Graph for T240................................................................................. 12 Figure 5 Reproducibility Graph for T240............................................................................. 12 Figure 6 Determination of Invalid Data ............................................................................. B-2 Figure 7 Determination of Outliers .................................................................................... B-4 LIST OF TABLES Table 1 Proficiency Samples Used in Analysis of T308.........................................................3 Table 2 Proficiency Samples Used in Analysis of T240, T313, T314, T315, and T316.......3 Table 3 Proficiency Samples Used in Analysis of T48 and T228..........................................3 Table 4 Summary Table for T308, Percent Asphalt (%) ................................................... 10 Table 5 Summary Table for T48, Flash Point (°C) ............................................................ 11 Table 6 Summary Table for T228, Specific Gravity .......................................................... 11 Table 7 Summary Table for T240, Change in Mass (%) ................................................... 12 Table 8 Summary Table for T313, Slope (m-value) ........................................................... 13 Table 9 Summary Table for T313, Creep Stiffness (MPa) ................................................ 13 Table 10 Summary Table for T314, Stress (MPa) ................................................................ 14 Table 11 Summary Table for T314, Percent Strain (%)...................................................... 14 Table 12 Summary Table for T315, Original G*/sinδ, (kPa) .............................................. 15 Table 13 Summary Table for T315, RTFO G*/sinδ, (kPa) ................................................. 15 Table 14 Summary Table for T315, PAV G*·sinδ, (kPa) .................................................... 16 Table 15 Summary Table for T316, Viscosity (Pa·s) ............................................................ 16 Table 16 Table of Statistics and Limits..................................................................................B-1 Table 17 Example Data ...........................................................................................................B-1 Table 18 Table of Statistics and Limits..................................................................................B-3 Table 19 Example Data ...........................................................................................................B-3 Table 20 Summary Table for T315, Phase Angle for Original Binder...............................C-1 Table 21 T308 Ignition Oven ..................................................................................................E-1 Table 22 T48 Cleveland Flash ................................................................................................E-1 Table 23 T228 Specific Gravity ..............................................................................................E-1 Table 24 T240 RTFO Loss ......................................................................................................E-1 Table 25 T313 BBR Slope .......................................................................................................E-1 Table 26 T313 BBR Stiffness ..................................................................................................E-1 Table 27 T314 DT Stress .........................................................................................................E-1 Table 28 T314 DT Strain.........................................................................................................E-1 Table 29 T315 DSR Original ..................................................................................................E-1 Table 30 T315 DSR RTFO......................................................................................................E-1 Table 31 T315 DSR PAV.........................................................................................................E-1 Table 32 T316 Rotational Viscosity .......................................................................................E-1 vi

Next: Acknowledgments »
Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320 Get This Book
×
 Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

TRB’s National Cooperative Highway Research Program (NCHRP) Web Document 71: Precision Estimates for AASHTO Test Method T308 and the Test Methods for Performance-Graded Asphalt Binder in AASHTO Specification M320 includes the results of Phase 3 of NCHRP 9-26, in which data from the AMRL Proficiency Sample Program (PSP) are used to create or update precision estimates for a variety of test methods. These include those methods specified in AASHTO Standard Specification M320, “Performance-Graded Asphalt Binder,” and AASHTO Standard Test Method T308, “Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method.” The report from Phase 1 of Project 9-26, which was published as NCHRP Web Document 54, includes precision estimates of selected volumetric properties of HMA using non-absorptive aggregates. The report from Phase 2, which was published as NCHRP Web Document 66, discusses the results of an investigation into the cause of variations in HMA bulk specific gravity test results using non-absorptive aggregates.

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!