Bridges for Service Life Beyond 100 Years: Innovative Systems, Subsystems, and Components (2014)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

129 AASHTO. 1996. AASHTO Standard Specifications for Highway Bridges, 16th ed. American Association of State Highway and Transportation Officials, Washington, D.C. AASHTO. 2004. AASHTO LRFD Bridge Design Specifications, 3rd ed. American Association of State Highway and Transportation Officials, Washington, D.C. AASHTO. 2010a. AASHTO LRFD Bridge Construction Specifications, 3rd ed. American Association of State Highway and Transportation Officials, Washington, D.C. AASHTO. 2010b. AASHTO LRFD Bridge Design Specifications, 5th ed. American Association of State Highway and Transportation Officials, Washington, D.C. Abendroth, R. E., L. F. Greimann, and P. E. Ebner. 1989. Abutment Pile Design for Jointless Bridges. Journal of Structural Engineering, Vol. 115, No. 11, pp. 2914–2929. ACI. 1997. Cracking of Concrete Members in Direct Tension. ACI 224.2R-92. Committee 224, American Concrete Institute, Farmington Hills, Mich. ACI 224R. 2001. Control of Cracking in Concrete Structures. ACI 224R-01. American Concrete Institute, Farmington Hills, Mich. ACI 365. 2000. Service-Life Prediction. ACI 365R-00. American Concrete Institute Committee 365, ACI, Farmington Hills, Mich. ACI 546. 2006. Guide for the Selection of Materials for the Repair of Con- crete. ACI 546.3R-06. American Concrete Institute Committee 546, ACI, Farmington Hills, Mich. Ala, N. 2011. Seamless Bridge System for the U.S. Practice. PhD dissertation. University of Nebraska–Lincoln. Ala, N., and A. Azizinamini. 2013a. Analytical Study and Design Provi- sions for Seamless Bridge System for the U.S. Practice. Submitted for publication to Journal of Bridge Engineering. Ala, N., and A. Azizinamini. 2013b. Experimental Study of New Seam- less Bridge System. Submitted for publication to Journal of Bridge Engineering. Ala, N., E. Power, and A. Azizinamini. 2013a. Experimental Evaluation of High Performance Sliding Surfaces. Submitted for publication to Journal of Bridge Engineering. Ala, N., E. Power, and A. Azizinamini. 2013b. Predicting Service Life of Sliding Surfaces in Bridge Bearing Devices. Submitted for publication to Journal of Bridge Engineering. Alampalli, S., G. Schongar, and H. Greenberg. 2004. In-Service Perfor- mance of an FRP Superstructure. FHWA/NY/SR-94/141. New York State Department of Transportation. Ardani, A., J. Mallela, and G. Hoffman, G. 2010. Oregon Demonstration Project: Alternate Project Delivery and Accelerated Bridge Construc- tion on OR 38, Drain to Elkton. Washington, D.C.: Federal Highway Administration. Arminox. 1999. Pier in Progreso, Mexico: Inspection Report. Evaluation of the Stainless Steel Reinforcement. http://www.arminox.com/Files/ Filer/Arminox%20doks/Arminox_Progreso_Inspec_Report_web .pdf. Accessed Nov. 19, 2013. Arockiasamy, M., N. Butrieng, and M. Sivakumar. 2004. State-of-the- Art of Integral Abutment Bridges: Design and Practice. Journal of Bridge Engineering, Vol. 9, No. 5, pp. 497–506. Arockiasamy, M., and M. Sivakumar. 2005. Effects of Restraint Moments in Integral Abutment Bridges. Integral Abutment and Jointless Bridges: The 2005 FHWA Conference, Baltimore, Md., pp. 185–198. Astaneh-Asl, A., B. Bolt, K. M. McMullin, R. R. Donikian, D. Modjtahedi, and S. Cho. 1994. Seismic Performance of Steel Bridges During the 1994 Northridge Earthquake. Report UCB/CE-STEEL-94-01. Depart- ment of Civil and Environmental Engineering, University of California, Berkeley. ASTM B348. 2011a. Standard Specification for Titanium and Titanium Alloy Bars and Billets. ASTM International, West Conshohocken, Pa. ASTM A955. 2011b. Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement. ASTM International, West Conshohocken, Pa. ASTM A1010-01. 2001. Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip. ASTM International, West Conshohocken, Pa. ASTM C192. 2007a. Standard Practice for Making and Curing Con- crete Test Specimens in the Laboratory. ASTM International, West Conshohocken, Pa. ASTM C192. 2007b. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, Pa. ASTM C876. 2009. Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete. ASTM International, West Conshohocken, Pa. ASTM C881. 2010. Specification for Epoxy-Resin-Base Bonding Sys- tems for Concrete. ASTM International, West Conshohocken, Pa. ASTM G109. 2007a. Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforce- ment in Concrete Exposed to Chloride Environments. ASTM Inter- national, West Conshohocken, Pa. ASTM G109. 2007b. Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments. ASTM Inter na- tional, West Conshohocken, Pa. References

130 Azizinamini, A. 2008. Proc., 2008 Accelerated Bridge Construction: Highway for Life Conference. Federal Highway Administration, Baltimore, Md. Azizinamini, A. 2013. Overview of the Simple for Dead–Continuous for Live Bridge System. Submitted for publication to Engineering Journal. Azizinamini, A., and S. K. Ghosh. 1997. Steel-Reinforced Concrete Structures in 1995 Hyogoken-Nanbu Earthquake. Journal of Struc- tural Engineering, Vol. 123, No. 8, pp. 986–992. Azizinamini, A., and A. J. Yakel. 2005. Innovative Steel Bridge System for Short Span Bridges to Accelerate Construction. Proc., 2005 FHWA Accelerated Bridge Construction Conference: Path to Future, San Diego, Calif. Azizinamini, A., and A. Yakel. 2006. Delayed Development of Composite Action in Steel Girder Bridges. Journal of Bridge Structures, Vol. 2, No. 3, pp. 119–132. Azizinamini, A., and J. Gull. 2012a. Improved Inspection Techniques for Steel Prestressing/Post-Tensioning Strand. Final report. BDK80 977-13, Vol. I. Florida Department of Transportation, Tallahassee. Azizinamini, A., and J. Gull. 2012b. Florida Department of Transportation Protocol for Condition Assessment of Steel Strands in Post-Tensioned Segmental Concrete Bridges. Final report. BDK80 977-13, Vol. II. Florida Department of Transportation, Tallahassee. Azizinamini, A., N. J. Lampe, and A. J. Yakel. 2003. Toward Development of a Steel Bridge System: Simple for Dead Load and Continuous for Live Load. Final report. Nebraska Department of Roads and National Bridge Research Organization, Lincoln. Azizinamini, A., A. J. Yakel, and S. Javidi Niroumand. 2008. Use of Steel Bridge System with Continuity for Live Load Only in Conjunction with Conventional and Accelerated Bridge Construction Method- ologies. Proc., 2008 Accelerated Bridge Construction: Highway for Life Construction, Federal Highway Administration, Baltimore, Md., pp. 107–114. Azizinamini, A., A. J. Yakel, and J. P. Swendroski. 2003. Development of a Design Guide for Phase Construction of Steel Girder Bridges. NDOR Project No. SPR-PL-1 (038) P530. National Bridge Research Orga- nization, Department of Civil Engineering, University of Nebraska– Lincoln. Badie, S. S., M. K. Tadros, and K. E. Pedersen. 2001. Re-Examination of I-Girder/Pier Connection in Jointless Bridges. PCI Journal, March–April, pp. 62–74. Bakht, B., L. G. Jaeger, and M. S. Cheung. 1983. Transverse Shear in Multi- Beam Bridges. Journal of Structural Engineering, Vol. 109, No. 4, 1983, pp. 936–949. Bard, A. and L. Faulkner. 2001. Electrochemical Methods: Fundamentals and Applications, 2nd ed. John Wiley and Sons, Inc., New York. Barnhart, R. A. 1982. FHWA Position on Cathodic Protection. Memo- randum. Federal Highway Administration. Bennett, J., T. J. Schue, K. C. Clear, D. L. Lankard, W. H. Hartt, and W. J. Swiat. 1993. Electrochemical Chloride Removal and Protection of Concrete Bridge Components: Laboratory Studies. SHRP-S-65. Strategic Highway Research Program, National Research Council, Washington, D.C. Bentz, D. P., M. A. Peltz, K. A. Snyder, and J. M. Davis. 2009. VERDICT: Viscosity Enhancers Reducing Diffusion in Concrete Technology. Concrete International, Vol. 31, No. 1, pp. 31–36. Bentz, D. P., and W. J. Weiss. 2011. NISTIR 7765: Internal Curing: A 2010 State-of-the-Art Review. National Institute of Standards and Tech- nology, Gaithersburg, Md. Birgisson, B. 2006. Nanomodification of Cement Paste to Improve Bulk Properties of Concrete. National Science Foundation Workshop on Nanomodification of Cementitious Materials, University of Florida, Gainesville, Aug. 8–11. Brena, S. F., C. Bonczar, S. Civjan, J. T. DeJong, and D. S. Crovo. 2007. Evaluation of Seasonal and Yearly Behavior of an Integral Abutment Bridge. Journal of Bridge Engineering, Vol. 12, No. 3, pp. 296–305. Bridge, R., S. Griffiths, and G. Bowmaker. 2005. The Concept of a Seam- less Concrete Pavement and Bridge Deck. In Australian Structural Engineering Conference 2005 (M. G. Stewart and B. Dockrill, eds.), Sydney, N.S.W., Australia, pp. 289–298. Bruneau, M., J. W. Wilson, and R. Tremblay. 1996. Performance of Steel Bridge During the 1995 Hyogoken-Nanbu (Kobe, Japan) Earthquake. Canadian Journal of Civil Engineering, Vol. 23, No. 23, pp. 678–713. BSI. 2012. Cathodic Protection of Steel in Concrete. BS EN ISO 12696:2012. British Standards Institution. February. Burke, M. P., Jr. 1990. Integral Bridges. In Transportation Research Record 1275, TRB, National Research Council, Washington, D.C., pp. 53–61. Burke, M. P., Jr. 1996. An Introduction to the Design and Construction of Integral Bridges. Workshop on Integral Bridges, Federal Highway Administration, West Virginia Department of Transportation and West Virginia University, Nov. 13–15. Burke, M. P., Jr. 2009. Integral and Semi-Integral Bridges. Wiley-Blackwell. Caltrans. 2008. Seismic Design Criteria, Version 1.4. August. Campbell, T. I., and W. L. Kong. 1987. TFE Sliding Surfaces in Bridge Bearings. Report No. ME-87-06. Ministry of Transportation and Communications, Research and Development, Report No. ME-87-06, Downsview, Ontario, Canada. Caner, A. 1996. Analysis and Design of Jointless Bridge Decks Supported by Simple-Span Girders. PhD dissertation. North Carolina State University, Raleigh. Caner, A., and P. Zia. 1998. Behavior and Design of Link Slabs for Joint- less Bridge Decks. PCI Journal, Vol. 43, pp. 68–80. CEB-FIP. 1993. CEB-FIP Model Code 1990. Redwood Books, Trowbridge, Wiltshire, United Kingdom. Chang, L. M., and Y. J. Lee. 2001. Evaluation and Policy for Bridge Deck Expansion Joints. FHWA/IN/JTRP-2000/1. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette. Chang, L. M., and Y. J. Lee. 2002. Evaluation of Performance of Bridge Deck Expansion Joints. Journal of Performance of Constructed Facility, Vol. 16, No. 1, pp. 3–9. Chen, R., and J. A. Yura. 1995. Wax Build-Up on the Surfaces of Natural Rubber Bridge Bearings. Research Report 1304-4. Center for Trans- portation Research, University of Texas, Austin. Chong, K. P., and E. J. Garboczi. 2002. Smart and Designer Structural Material Systems. International Journal of Progress in Structural Engineering and Materials, Vol. 4, No. 4, pp. 417–430. Chung, R. (ed.). 1996. The January 17, 1995 Hyogoken-Nanbu (Kobe, Japan) Earthquake Performance of Structures, Lifelines, and Fire Protection Systems. NIST Special Publication 901. Building and Fire Research Laboratory, National Institute of Standards and Technology, Gaithersburg, Md. Civjan, S. A., C. Bonczar, S. F. Brena, J. DeJong, and D. Crovo. 2007. Inte- gral Abutment Bridge Behavior: Parametric Analysis of a Massachu- setts Bridge. Journal of Bridge Engineering, Vol. 12, No. 1, pp. 64–71. Clemeña, G. G. 2003. Investigation of the Resistance of Several New Metallic Reinforcing Bars to Chloride-Induced Corrosion in Con- crete. VTRC 04-R7. Virginia Transportation Research Council, Charlottesville, December. Clemeña, G., and D. R. Jackson. 1997. Pilot Applications of Electro- chemical Chloride Extraction on Concrete Bridge Decks in Virginia.

131 In Transportation Research Record 1597, TRB, National Research Council, Washington, D.C., pp. 70–76. Clifton, J. R. 1991. Predicting Remaining Service Life of Concrete. NISTIR 4712. National Institute of Standards and Technology, Gaithersburg, Md. Clifton, J. R., and L. I. Knab. 1989. Service Life of Concrete. NISTIR 89-4086. U.S. Department of Commerce. Connal, J. 2003. Integral Abutment Bridges: Australian and US Practice. Seminar on Design and Construction of Integral Bridges, PWD Malaysia, 12th International Conference of the Road Engineering Association of Malaysia (REAM), Kuala Lumpur, Malaysia. July. da Silva, M. Ferreira. 2011. Development of Self-Stressing System for Bridge Application with Emphasis on Precast Panel Deck System. PhD dissertation. University of Nebraska–Lincoln. Davidson, E., D. W. White, and L. Kahn. 2012. Evaluation of Performance and Maximum Length of Continuous Decks in Bridges, Part 2. Final report. Office of Materials and Research, Georgia Department of Transportation, Atlanta, August. de Ibarra, Y. S., J. J. Gaitero, E. Erkizia, and I. Campillo. 2006. Atomic Force Microscopy and Nanoindentation of Cement Pastes with Nanotube Dispersions. Physica Status Solidi A, Vol. 203, No. 6, pp. 1076–81. Dexter, R. J., W. J. Wright, and J. W. Fisher. 2004. Fatigue and Fracture of Steel Girders. Journal of Bridge Engineering, Vol. 9, No. 3, pp. 278–286. Donachie, M. J. 2000. Titanium: A Technical Guide. ASM International, Materials Park, Ohio. Doust, S. E. 2011. Extending Integral Concepts to Curved Bridge Systems. PhD dissertation. University of Nebraska–Lincoln. Doust, S. E., and A. Azizinamini. 2011a. End Displacements in Curved Steel I-Girder Integral Abutment Bridges. Submitted for publication to Journal of Bridge Engineering. Doust, S. E., and A. Azizinamini. 2011b. Optimum Pile Orientation in Straight and Curved Steel I-Girder Integral Abutment Bridges. Sub- mitted for publication to Journal of Bridge Engineering. DuPont de Nemours Co. Design of Neoprene Bridge Bearing Pads. Wilmington, D.C., 1959. Durham, R. A., and M. O. Durham. 2005. Cathodic Protection: Conse- quences and Standards from Using CP Systems to Prevent Corrosion. Industry Applications Magazine, IEEE, Vol. 11, No. 1, pp. 41–47. Eggert, H., J. Grote, and W. Kauschke. Lager im Bauwesen. 1981. Bear- ings in Civil Engineering. Wilhelm Ernst and Sohn, Berlin (English translation). Elremaily, A., and A. Azizinamini. 2001a. Design Provisions for Connec- tions Between Steel Beams and Concrete Filled Tube Columns. Journal of Constructional Steel Research, Vol. 57, No. 9, pp. 971–995. Elremaily, A., and A. Azizinamini. 2001b. Experimental Behavior of Steel Beam to CFT Column Connections. Journal of Constructional Steel Research, Vol. 57, No. 10, pp. 1099–1119. El-Safty, A. K. 1994. Behavior of Jointless Bridge Decks. PhD dissertation. North Carolina State University, Raleigh. El-Safty, A., and A. M. Okeil. 2008. Extending the Service Life of Bridges Using Continuous Decks. PCI Journal, Vol. 53, No. 6, pp. 96–111. ELTECH Research Corporation. 1993. Cathodic Protection of Reinforced Concrete Bridge Elements: A State-of-the-Art Report. SHRP-S-337. Strategic Highway Research Program, Washington, D.C. Fallaha, S., C. Sun, M. Lafferty, and M. Tadros. 2004. High-Performance Precast Concrete NUDECK Panel System for Nebraska’s Skyline Bridge. PCI Journal, September–October, pp. 40–50. Farimani, M. R., S. N. Javidi, D. T. Kowalski, and A. Azizinamini. 2013. Numerical Analysis and Design Provision Development of Simple for Dead–Continuous for Live Bridge System. Submitted for publication to Engineering Journal. Fennema, J. L., J. A. Laman, and D. G. Linzel. 2004. Predicted and Mea- sured Response of an Integral Abutment Bridge. Journal of Bridge Engineering, Vol. 10, No. 6, pp. 666–677. FHWA. 1989. Technical Advisory T5140.22: Uncoated Weathering Steel in Structures. Federal Highway Administration. http://www.fhwa .dot.gov/bridge/t514022.cfm. Accessed Nov. 23, 2013. Fincher, H. E. 1983. Evaluation of Rubber Expansion Joints for Bridges. Report No. FHWA/IN/RTC-83/1. Federal Highway Administration, pp. 15–16. Fisher, J., D. Hall, R. McCabe, K. Price, C. Seim, and S. Woods. 2006. Steel Bridges in the United States: Past, Present, and Future. In Transporta- tion Research Circular Number E-C104: 50 Years of Interstate Struc- tures: Past, Present, and Future. Transportation Research Board of the National Academies, Washington, D.C. Fisher, J. W. 1984. Fatigue and Fracture of Steel Bridges: Case Studies. Wiley Interscience, New York. Fisher, J. W. 1997. The Evolution of Fatigue-Resistant Steel Bridges. 1997 Distinguished Lectureship. Presented at 76th Annual Meeting of the Transportation Research Board, Washington, D.C. Fisher, J. W., E. Statnikov, and L. Tehini, L. 2002. Fatigue Strength Improvement of Bridge Girders by Ultrasonic Impact Treatment (UIT). Welding in the World, Vol. 46, No. 9/10, pp 16–22. Fisher, J. W., P. A. Albrecht, B. T. Yen, D. J. Klingerman, and B. M. McNamee. 1974. NCHRP Report 147: Fatigue Strength of Steel Beams with Transverse Stiffeners and Attachments. HRB, National Research Council, Washington, D.C. Fisher, J. W., B. M. Barthelemy, D. R. Mertz, and J. A. Edinger. 1980. NCHRP Report 227: Fatigue Behavior of Full-Scale Welded Bridge Attachments. TRB, National Research Council, Washington, D.C. Fisher, J. W., K. H. Frank, M. A. Hirt, and B. M. McNamee. 1970. NCHRP Report 102: Effect of the Fatigue Strength of Steel Beams. HRB, National Research Council, Washington D.C. Fisher, J. W., A. Nussbaumer, P. B. Keating, and B. T. Yen. 1993. NCHRP Report 354: Resistance of Welded Details Under Variable Amplitude Long-Life Fatigue Loading. TRB, National Research Council, Washington, D.C. Fisher, J. W., B. Yen, D. Wang, and J. Mann. 1987. NCHRP Report 302: Fatigue and Fracture Evaluation for Rating of Riveted Bridges. TRB, National Research Council, Washington, D.C. Fort Miller Company, Inc. 1998. Inverset Bridge System—Design Installation and Technical Manual. Schuylerville, NY: Product literature, 2nd Ed. Freyermuth, C. L. 1969. Design of Continuous Highway Bridges with Precast, Prestressed Concrete Girders. PCI Journal, April, pp. 14–39. Froes, F. H., M. N. Gungor, and M. A. Iman. 2007. Cost-Affordable Tita- nium: The Component Fabrication Perspective. Journal of Materials, Vol. 59, No. 6, pp. 28–31. Fuller, S. K., and S. R. Petersen. 1995. NIST Handbook 135: Life-Cycle Costing Manual. U.S. Department of Commerce. Fyfe, E., P. Milligan, and S. Watson. 2006. A Discussion of Failure Modes on High Load Bridge Bearings Which Have Resulted in the Current Design Methods, Philosophy, and Guidelines for Disc Bearings. 6th World Congress on Joints, Bearings and Seismic Systems for Concrete Structures, Halifax, Nova Scotia, Canada. Gastal, F. P. S. L. 1986. Instantaneous and Time-Dependent Response and Strength of Jointless Bridge Beams. PhD dissertation. North Carolina State University, Raleigh. Glass, G. K., and B. Reddy. 2002. The Influence of the Steel Concrete Interface on the Risk of Chloride-Induced Corrosion. In COST 521: Corrosion of Steel in Reinforced Concrete Structures: Final Reports of Single Projects (R. Weydert, ed.), Luxembourg University of Applied Sciences, Luxembourg, pp. 227–232.

132 Gong, L., D. Darwin, J. Browning, and C. E. Locke. 2006. Evaluation of Multiple Corrosion Protection Systems and Stainless Steel Clad Reinforcement for Reinforced Concrete. SM Report Number 82. University of Kansas Center for Research, Inc., Lawrence, January. Gong, L., D. Darwin, J. P. Browning, and C. E. Locke. 2002. Evaluation of Mechanical and Corrosion Properties of MMFX Reinforcing Steel for Concrete. SM Report No. 70. University of Kansas, Lawrence, December. Greimann, L. F., R. E. Abendroth, D. E. Johnson, and P. B. Ebner. 1987. Pile design and tests for integral abutment bridges. Final Report, HR-273, and Addendum. Iowa Department of Transportation and College of Engineering, Iowa State University, Ames. Griffiths, S., G. Bowmaker, C. Bryce, and R. Q. Bridge. 2005. Design and Construction of Seamless Pavement on Westlink M7, Sydney, Australia. Proc., 8th International Conference on Concrete Pavements, International Society for Concrete Pavements, Colorado Springs, Colo., pp. 21–38. Gull, J. H., A. J. Yakel, and A. Azizinamini. 2013. Experimental Investiga- tion of Longitudinal Closure Pour Detail for Prefabricated Slabs Used in Modular Construction. Submitted for publication to Journal of Bridge Engineering. Hakenjos, V., K. Richter, A. Gerber, and J. Wiedemyer. 1985. Studies of Movements of Bridge Structures As a Result of Temperature and Traffic Load, Taking a Steel Bridge As an Example. Stahlbau, Vol. 54, No. 2, pp. 55–59 (in German). Hanna, K., G. Morcous, and M. Tadros. 2009. Transverse Post-Tensioning Design and Detailing of Precast, Prestressed Concrete Adjacent-Box- Girder Bridges. PCI Journal, Fall 2009, pp. 64–78. Hanna, K. E., G. Morcous, and M. K. Tadros. 2007. Transverse Design and Detailing of Adjacent Box Beam Bridges. PCI National Bridge Conference, Phoenix, Ariz., October. Hanna, K., G. Morcous, and M. Tadros. Forthcoming. Design, Detailing, and Testing of Non-Post-Tensioned Transverse Connections in Adjacent Box Girder Bridges. PCI Journal. Hansen, J., K. Hanna, and M. K. Tadros. 2012. Simplified Transverse Post-Tensioning Construction and Maintenance of Adjacent Box Girders. PCI Journal, Spring 2012, pp. 64–79. Hanson, N. W., D. M. Schultz, J. J. Roller, A. Azizinamini, and H. T. Tang. 1987. Testing of Large-Scale Concrete Containment Struc- tural Elements. Nuclear Engineering and Design, Vol. 100, No. 2, pp. 129–149. Harris, D. K., J. Sarkar, and T. M. Ahlborn. 2011. Characterization of Interface Bond of Ultra-High-Performance Concrete Bridge Deck Overlays. In Transportation Research Record: Journal of the Transpor- tation Research Board, No. 2240, Transportation Research Board of the National Academies, Washington, D.C., pp. 40–49. Hartt, W. H., R. G. Powers, D. K. Lysogorski, M. Paredes, F. P. Marino, and R. Simmons. 2009. Corrosion Resistant Alloys for Reinforced Concrete. FHWA-HRT-09-020. Federal Highway Administration. Hartt, W. H., R. G. Powers, D. K. Lysogorski, M. Paredes, and Y. P. Virmani. 2006. Job Site Evaluation of Corrosion-Resistant Alloys for Use As Reinforcement in Concrete. FHWA-HRT-060-078. Federal Highway Administration, McLean, Va. Haugeto, W., and A. Ranasinghe. 2008. Link Slab Continuity Detail on Long-Span Bridges. Proc., International Bridge Conference, Pittsburgh, Pa. He, X., and X. Shi. 2008. Chloride Permeability and Microstructure of Portland Cement Mortars Incorporating Nanomaterials. TRR 2070 Transportation Research Board, pp. 13–21. Headed Reinforcement Corporation (HRC). 2011. HRC200 Series. http:// www2.hrc-usa.com/downloads/products/HRC200/HRC200-SPEC .pdf. Accessed 2012. Heffron, R. 2007. Innovative Techniques for Extending the Service Life of Deteriorating Concrete Piers and Wharves. PORTS 2007: 30 Years of Sharing Ideas: 1977–2007, Proc., 11th Triennial International Conference on Ports, San Diego, Calif., March 25–28. Heymsfield, E., J. McDonald, and R. R. Avent. 2001. Neoprene Bearing Pad Slippage at Louisiana Bridges. Journal of Bridge Engineering, 30–36. Hookham, C. J. 1990. Rehabilitation of Great Lakes Steel’s Number One Dock. In Paul Klieger Symposium on Performance of Concrete, SP-122 (D. Whiting, ed.), American Concrete Institute, Farmington Hills, Mich., pp. 385–399. Huckelbridge, A. A., H. El-Esnawi, and F. Moses. 1995. Shear Key Perfor- mance in Multi-Beam Box Girder Bridges. Journal of Performance of Constructed Facilities, Vol. 9, No. 4, pp. 271–285. Iowa DOT CTRE Project 02-103. Report. Jacobsen, F. K., and R. K. Taylor. 1971. TFE Expansion Bearings for Highway Bridges. Report No. RDR-31. Illinois State Division of Highways, Springfield. Jung, Y. S., D. G. Zollinger, and S. D. Tayabji. 2007. Best Practices of Con- crete Pavement Transition Design and Construction. Report No. FHWA/ TX-07/0-5320-1. Texas Department of Transportation, Austin. Kahl, S. 2005. Box-Beam Concerns Found Under the Bridge. C&T Research Record No. 102. Construction and Technology Division, Michigan Department of Transportation, Lansing. Keating, P., and J. W. Fisher. 1986. NCHRP Report 286: Evaluation of Fatigue Tests and Design Criteria on Welded Details. TRB, National Research Council, Washington, D.C. Kepler, J. L., D. Darwin, and C. E. Locke. 2000. Evaluation of Corrosion Protection Methods for Reinforced Concrete Highway Structures. SM Report No. 58. University of Kansas Center for Research, Lawrence. Kim, Y. Y., G. Fischer, and V. C. Li. 2004. Performance of Bridge Deck Link Slabs Designed with Ductile Engineered Cementitious Com- posite. ACI Structural Journal, Vol. 101, No. 6, pp. 792–801. Lebek, D. E. 1985. Bridge Bearings, Draft 1. Technical Committee on Road Bridges, Permanent International Association of Road Congresses, Paris. Lee, D. J. 1994. Bridge Bearing and Expansion Joints, 2nd ed. E. & F. N. Spon, London, pp. 52–53. Lehman, D. E., C. W. Roeder, R. Larson, and K. Curtin. 2003. Cotton Duck Bearing Pads: Engineering Evaluation and Design Recommen- dations. Report No. WA-RD 569.1. Washington State Department of Transportation, Olympia. Lepech, M., and V. C. Li. 2005. Design and Field Demonstration of ECC Link Slabs for Jointless Bridge Decks. Proc., 3rd International Conference on Construction Materials: Performance, Innovations and Structural Implications, Vancouver, British Columbia, Canada, Aug. 22–24. Lepech, M. D., and V. Li. 2009a. Application of ECC for Bridge Deck Link Slabs. Materials and Structures, Vol. 42, No. 9, pp. 1185–1195. Lepech, M. D., and V. Li. 2009b. Design and Field Demonstration of ECC Link Slabs for Jointless Bridge Decks. George G. Brown Laboratory, University of Michigan, Ann Arbor. Li, H., H. Xiao, J. Yuan, and J. Ou. 2004. Microstructure of Cement Mortar with Nanoparticles. Composites Part B: Engineering, Vol. 35, No. 2, pp. 185–189. Li, V. C. 2003. On Engineered Cementitious Composites (ECC): A Review of the Material and Its Applications. Journal of Advanced Concrete Technology, Vol. 1, No. 3, pp. 215–230. Manning, D. G., and A. K. C. Ip. 1994. Rehabilitating Corrosion- Damaged Bridges Through the Electrochemical Migration of Chloride Ions. Concrete Bridges in Aggressive Environments, SP 151, American Concrete Institute, Detroit, Mich., pp. 221–244.

133 Manning, D. M. 1995. NCHRP 220: Synthesis of Highway Practice: Water- proofing Membranes for Concrete Bridge Decks. TRB, National Research Council, Washington, D.C. Maurer Söhne. 2003. Maurer MSM® Sliding Bearings. August. http:// www.maurer-soehne.com/files/bauwerkschutzsysteme/pdf/ en/productinfo/MAURER_MSM_sliding_bearings.pdf. Accessed Nov. 20, 2013. McCullough, C. 1930. Cost Economies in Concrete Bridges. Highway Research Board Proceedings, National Research Council, Washing- ton, D.C. McDonald, D. B., D. W. Pfeifer, and M. R. Sherman. 1998. Corrosion Evaluation of Epoxy-Coated, Metallic-Clad, and Solid Metallic Reinforcing Bars in Concrete. No. FHWA-RD-98-153. Federal Highway Administration. McDonald, J., E. Heymsfield, E., and R. R. Avent. 2000. Slippage of Neoprene Bridge Bearings. Journal of Bridge Engineering, 216–223. McDonald, D. B., M. R. Sherman, D. W. Pfeifer, and Y. P. Virmani. 1995. Stainless Steel Reinforcing As Corrosion Protection. Concrete Inter- national, Vol. 17, No. 5, pp. 65–70. Metals Handbook. 1998. ASM International, Materials Park, Ohio. Michigan DOT. 2005. Bridge Decks Going Jointless: Cementitious Composites Improve Durability of Link Slabs. In Research Record No. 100: Construction and Technology, Michigan Department of Transportation, Lansing. Michigan DOT. 2006. Engineered Cementitious Composite May Replace Bridge Deck Joints. Research Spotlight, Office of Research and Best Practices, Michigan Department of Transportation, Lansing. Miller, R. A., R. Castrodale, A. Mirmiran, and M. Hastak. 2004. NCHRP Report 519: Connection of Simple-Span Precast Concrete Girders for Continuity. Transportation Research Board of the National Academies, Washington, D.C. Modjeski and Masters, Inc. 2008. Birmingham Bridge Forensic Inspection. Final report summary. Pennsylvania Department of Transportation, Engineering District 11, Bridgeville. Mogawer, W. S., and A. J. Austerman. 2004. Evaluation of Asphaltic Expansion Joints. New England Transportation Consortium, Storrs, Conn. Mokha, A. S., M. C. Constantinou, and A. M. Reinhorn. 1990. Teflon Bearings in Base Isolation, I: Testing. Journal of Structural Engineering, Vol. 116, No. 2, pp. 438–454. Mothe, R. N. 2006. Partial Continuity in Prestressed Concrete Girder Bridges with Jointless Decks. MS thesis. Louisiana State Univer- sity, Baton Rouge. Muller-Rochholz, J. F. W., M. Fienrich, and M. Breitbach. 1986. Mea- surement of Horizontal Bridge Movements Due to Temperature, Wind, and Traffic Loadings. Joint Sealing and Bearing Systems for Concrete Structures, ACI Publication SP94, Vol. 1, 1986, pp. 409–418. NACE Standard RP0290-2000. 2000. Impressed Current Cathodic Protec- tion of Reinforcing Steel in Atmospherically Exposed Concrete Struc- tures. National Association of Corrosion Engineers International, Houston, Tex. Nagai, M., Y. Okui, T. Ohta, H. Nakamura, M. Inomoto, K. Nishio, et al. 2000. Time Dependent Stress Variation of a Composite Two-I-Girder Bridge—Chidorinosawagawa Bridges. In Bridge Management 4. London: Thomas Telford. NBI. 2013. Bridges and Structures: National Bridge Inventory (NBI). Federal Highway Administration. http://www.fhwa.dot.gov/bridge/ nbi.cfm. Accessed Dec. 15, 2013. NCHRP. 1996. NCHRP Report 381: Report on the 1995 Scanning Review of European Bridge Structures. TRB, National Research Council, Washington, D.C. NCHRP. 2004. NCHRP Synthesis 333: Concrete Bridge Desk Performance: A Synthesis of Highway Practice. Transportation Research Board of the National Academies, Washington, D.C. Norwegian Public Roads Administration. 2009. General Specifications 2, Standard Specification Texts for Bridges and Quays, Principal spec- ification 8. In Handbook 026E, Oslo, Norway. March (translation of November 2007 ed.). NSBA. 2005. Steel Bridge Design Handbook. National Steel Bridge Alliance and Federal Highway Administration. http://www.aisc.org/ contentNSBA.aspx?id=20244. Nürnberger, U. 1996. Stainless Steel in Concrete: State of the Art Report. European Federation of Corrosion Publication No. 18. EFC Work- ing Party on Corrosion of Reinforcement in Concrete, European Federation of Corrosion. NYSDOT. 2008. Continuity Retrofit. In Bridge Design Manual, New York State Department of Transportation, Albany, pp. 20–26. Oesterle, R. G., J. D. Glikin, and S. C. Larson. 1989. NCHRP Report 322: Design of Precast Prestressed Bridge Girders Made Continuous. TRB, National Research Council, Washington, D.C. Oesterle, R. G., and H. R. Lotfi. 2005. Transverse Movement in Skewed Integral Abutment Bridges. Proc., FHWA Conference on Integral Abutment and Jointless Bridges, Baltimore, Md. Oesterle, R. G., A. B. Mehrabi, H. Tabatabai, A. Scanlon, and C. A. Ligozio. 2004. Continuity Considerations in Prestressed Concrete Jointless Bridges. Proc., 2004 Structures Congress: Building on the Past: Securing the Future, American Society of Civil Engineers, Nashville, Tenn., pp. 227–234. Oesterle, R. G., and J. S. Volz. 2005. Effective Temperature and Longitudi- nal Movement in Integral Abutment Bridges. Proc., FHWA Conference on Integral Abutment and Jointless Bridges, Baltimore, Md. Ozyildirim, C. 1998. Permeability Specifications for High-Performance Concrete Decks. In Transportation Research Record 1610, TRB, National Research Council, Washington, D.C., pp. 1–5. Ozyildirim, C. 1999. HPC Bridge Decks in Virginia. ACI Concrete Inter- national, Vol. 21, No. 2, pp. 59–60. Patty, J., F. Seible, and C. Uang. 2002. Seismic Response of Integral Bridge Connections. Final report. Caltrans, Sacramento. PCI. 2003. Precast Prestressed Concrete Bridge Design Manual, 2nd ed., Precast/Prestressed Concrete Institute, Chicago, Ill. PCI Bridges Committee. 2011. The State of the Practice of Precast/ Prestressed Adjacent Box Beam Bridges. Chicago, Ill. Pemmaraju Venkata, H. P., G. Tsiatas, and K. W. Lee. 2006. The Buried Joint Approach for Expansion Joint Retrofit: A Case Study. Presented at 85th Annual Meeting of the Transportation Research Board, Wash- ington, D.C. Polder, R. B. 1998. Cathodic Protection of Reinforced Concrete Struc- tures in The Netherlands: Experience and Developments. HERON, Vol. 43, No. 1, pp. 3–14. Pritchard, B. (ed.). 1994. Continuous and Integral Bridges. E. & F. N. Spon, London. Purvis, R. 2003. NCHRP Synthesis 319: Bridge Deck Joint Performance. Transportation Research Board of the National Academies, Wash- ington, D.C. Qian, S., M. D. Lepech, Y. Y. Kim, and V. C. Li. 2009. Introduction of Transition Zone Design for Bridge Deck Link Slabs Using Ductile Concrete. ACI Structural Journal, Vol. 106, No. 1, pp. 96–105. Qing, Y., Z. Zenan, K. Deyu, and C. Rongshen. 2007. Influence of Nano- SiO2 Addition on Properties of Hardened Cement Paste As Com- pared with Silica Fume. Construction and Building Materials, Vol. 21, No. 3, pp. 539–545. Ratner, M., and D. Ratner. 2003. Nanotechnology: A Gentle Introduction to the Next Big Idea. Pearson Education, London.

134 Roeder, C. W., and J. F. Stanton. 1991. State-of-the-Art Elastomeric Bridge Bearing Design. ACI Journal, Vol. 88, pp. 31–41. Roeder, C. W., J. F. Stanton, and A. W. Taylor. 1987. NCHRP Report 298: Performance of Elastomeric Bearings. TRB, National Research Council, Washington, D.C. Roeder, C. W., J. F. Stanton, and T. Feller. 1989. NCHRP Report 325: Low Temperature Behavior and Acceptance Criteria for Elastomeric Bearings. TRB, National Research Council, Washington, D.C. Russell, H. G. 2012. NCHRP Synthesis of Highway Practice 425: Water- proofing Membranes for Concrete Bridge Decks. Transportation Research Board of the National Academies, Washington, D.C. Salas, R. M., A. L. Kotys, J. S. West, A. J. Schokker, J. E. Breen, and M. E. Kreger. 2003. Long-Term Post-Tensioned Beam Exposure Test Speci- mens Final Evaluation. Research Report 1405-7. Center for Trans- portation Research, Bureau of Engineering Research, University of Texas, Austin. Scully, J. R., and M. F. Hurley. 2007. Investigation of the Corrosion Prop- agation Characteristics of New Metallic Reinforcing Bars. Final Report VTRC 07-CR9. Virginia Transportation Research Council, Charlottesville. Seismic Energy Products. 2010. Fluorogold® Slide Bearings. Seismic Energy Products, Athens, Tex. http://www.registrocdt.cl/registrocdt/ uploads/FICHAS/TECNOAV/Aislantes%20S%C3%ADsmicos/ fluorogold.pdf. Accessed Nov. 20, 2013. Sergi, G., and C. L. Page. 1994. The Effects of Cathodic Protection on Alkali– Silica Reaction in Reinforced Concrete: Stage 2. TRL Contractor Report 62. Department of Transport, United Kingdom. Sergi, G., D. Simpson, and J. Potter. 2008. Long-Term Performance and Versatility of Zinc Sacrificial Anodes for Control of Reinforce- ment Corrosion. EUROCORR 2008: European Corrosion Congress, Edinburgh, Scotland. Sharp, S. R., G. G. Clemeña, Y. P. Virmani, G. E. Stoner, and R. G. Kelly. 2002. Electrochemical Chloride Extraction: Influence of Concrete Sur- face on Treatment. FHWA-RD-02-107 and VTRC 02-R. Virginia Center for Transportation Innovation and Research, Charlottesville. Sherafati, A. 2011. Expanding the Length of Jointless Bridges by Providing Rotational Capacity over the Pile Head. PhD dissertation. University of Nebraska–Lincoln. Sherafati, A., and A. Azizinamini. 2013. Flexible Pile-Cap Connection in Jointless Bridges, Part II: Theory and Design. Submitted for publication to Journal of Bridge Engineering. Sherafati, A., M. Sotudeh Chafi, and A. Azizinamini. 2012. Buckling of Piles in Cohesive Soil Supporting Jointless Bridges. Bridge Structures: Assessment, Design and Construction, Vol. 8, No. 1, pp. 15–24. Sherafati, A., A. J. Yakel, and A. Azizinamini. 2013. Flexible Pile-Cap Connection in Jointless Bridges, Part I: Experiment. Submitted for publication to Journal of Bridge Engineering. Sherman, M. R., R. L. Carrasquillo, and D. W. Fowler. 1993. Field Eval- uation of Bridge Corrosion Protection Measures. Texas Department of Transportation, Austin. Shinozuka, M. (ed.), D. Ballantyne, R. Borcherdt, I. Buckle, T. O’Rourke, and A. Schiff. 1995. The Hanshin–Awaji Earthquake of January 17, 1995: Performance of Lifelines. Technical Report NCEER-95-0015. National Center for Earthquake Engineering Research, Buffalo, N.Y. Siegwart, M., J. F. Lyness, B. J. McFarland, and G. Doyle. 2005. The Effect of Electrochemical Chloride Extraction on Pre-Stressed Concrete. Construction and Building Materials, Vol. 19, No. 8, pp. 585–594. Silva, M. F., A. J. Yakel, and A. Azizinamini. 2013. Self-Stressing System for Bridge Application with Emphasis on Precast Panel Deck System. Submitted for publication to Journal of Bridge Engineering. Smith, F. N., and M. Tullmin. 1999. Using Stainless Steels As Long-Lasting Rebar Material. Materials Performance, Vol. 38, No. 5, pp. 72–76. Snedeker, K. 2009. Evaluation of Performance and Maximum Length of Continuous Decks in Simple-Span Bridges. MS thesis. Georgia Institute of Technology, Atlanta. Snedeker, K., D. W. White, and L. Kahn. 2011. Evaluation of Performance and Maximum Length of Continuous Decks in Bridges, Part 1. Final report, Project No. 09-07. Office of Materials and Research, Georgia Department of Transportation, Atlanta. Soderqvist, M.-K., and E. Vesikari. 2003. LIFECON: Generic Technical Handbook for a Predictive Life Cycle Management System of Con- crete Structures (LMS). Report funded by the European Commu- nity under the Competitive and Sustainable Growth Programme. Stanton, J. F., and C. W. Roeder. 1982. NCHRP Report 248: Elastomeric Bearings Design, Construction, and Materials. NCHRP Report 248. TRB, National Research Council, Washington, D.C. Stanton, J. F., C. W. Roeder, and T. I. Campbell. 1999. Appendix C, Friction and Wear of PTFE Sliding Surfaces. In NCHRP Report 432: High-Load Multi-Rotational Bridge Bearings, TRB, National Research Council, Washington, D.C. Stanton, J. F., C. W. Roeder, P. Mackenzie-Helnwein, C. White, C. Kuester, and B. Craig. 2008. NCHRP Report 596: Rotation Limits for Elastomeric Bearings. Transportation Research Board of the National Academies, Washington, D.C. Stratfall, R. F. 1974. Experimental Cathodic Protection of a Bridge Deck. In Transportation Research Record 500, TRB, National Research Council, Washington, D.C., pp. 1–15. Telang, N. M., and A. M. Mehrabi. 2003. Cracked Girders. Public Roads, Vol. 67, No. 3. TIMET. 1999. Corrosion Resistance of Titanium. Titanium Metals Corpo- ration, Denver, Colo. http://www.parrinst.com/wp-content/uploads/ downloads/2011/07/Parr_Titanium-Corrosion-Info.pdf. Accessed Nov. 20, 2013. TRB. 2006. Transportation Research Circular E-C107: Control of Crack- ing in Concrete: State of the Art. Transportation Research Board of the National Academies, Washington, D.C. Ulku, E., U. Attanayake, and H. Aktan. 2009a. Retrofit Design Details for Deck Joint Elimination over Abutments. Presented at 88th Annual Meeting of the Transportation Research Board, Washington, D.C. Ulku, E., U. Attanayake, and H. Aktan. 2009b. Jointless Bridge Deck with Link Slabs: Design for Durability. In Transportation Research Record: Journal of the Transportation Research Board, No. 2131, Transporta- tion Research Board of the National Academies, Washington, D.C., pp. 68–78. Vector Corrosion Technologies. 2013. [System Selector Chart] http:// www.vector-corrosion.com/wordpress/wp-content/uploads/2009/ 07/DOC_0003.PDF. Accessed Jan. 29, 2014. Velivasakis, E. E., S. K. Henriksen, and D. W. Whitmore. 1997. Halting Corrosion by Chloride Extraction and Realkalization. Concrete Inter- national, Vol. 19, No. 12, pp. 39–45. Virmani, Y. P., and G. G. Clemeña. 1998. Corrosion Protection: Con- crete Bridges. Report No. FHWA-RD-98-088. Federal Highway Administration. Wallbank, E. J. 1989. The Performance of Concrete in Bridges: A Survey of 200 Highway Bridges. Department of Transport, HMSO, London. Wassef, W. G., D. Davis, S. Sritharan, J. R. Vander Werff, R. E. Abendroth, J. Redmond, and L. F. Greimann. 2004. NCHRP Report 527: Integral Steel Box-Beam Pier Caps. Transportation Research Board, Washing- ton, D.C. Wasserman, E. P. 1987. Jointless Bridge Decks. Engineering Journal, 3rd Quarter, pp. 93–100.

135 Williamson, G., R. E. Weyers, M. C. Brown, and M. M. Sprikel. 2007. Bridge Deck Service Life Prediction and Cost. VTRC 08-CR4. Virginia Transportation Research Council, Charlottesville. Wing, K. M., and M. J. Kowalsky. 2005. Behavior, Analysis and Design of an Instrumented Link Slab Bridge. Journal of Bridge Engineering, Vol. 10, No. 3, pp. 331–344. Wipf, T. J. 2006. Evaluation of Corrosion Resistance of Different Steel Reinforcement Types. Wright, W. J., H. Tjiang, J. Hartmann, and P. Albrecht. 2000. Fracture Resistance of Modern Bridge Steels. Proc., ASCE Structures Congress, Philadelphia, Pa. Yakel, A. J., and A. Azizinamini. 2013. Testing of Self-Stressing System for Bridge Application. Submitted for publication to Journal of Bridge Engineering. Yakel, A., M. Farimani, N. Mossahebi, and A. Azizinamini, 2007. Three Innovative Concepts for Short Span Steel Bridges. Final Report for Nebraska Department of Roads, National Bridge Research Organization (NaBRO), Department of Civil Engineering, University of Nebraska– Lincoln. Yuen, L. H. 2005. Performance of Concrete Bridge Deck Joints. MS thesis. Brigham Young University, Provo, Utah. Yura, J., A. Kumar, A. Yakut, C. Topkaya, E. Becker, and J. Collingwood. 2001. NCHRP Report 449: Elastomeric Bridge Bearings: Recom- mended Test Methods. TRB, National Research Council, Washing- ton D.C. Zia, P., A. Caner, and A. K. El-Safty. 1995. Jointless Bridge Decks. Report No. FHWA/NC/95-006. Center for Transportation Engineering Stud- ies, North Carolina State University, Raleigh.