Subsurface Utility Engineering Information for Airports (2012)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

36 Following is a specific bibliographic list of the reports, web- sites, and data sources utilized in preparing the synthesis report. Normative SourceS Strategic Highway Research Program Projects R-01A, R-01B, and R-01C. American Association of State and Highway Transportation Officials (AASHTO), Right of Way and Utilities: Guide- lines and Best Practices, Standing Committee on High- ways (SCOH), Strategic Plan Strategy 4-4, Washington, D.C., Jan. 6, 2004 American Association of State Highway and Transportation Officials and Federal Highway Administration (AASHTO/ FHWA), CCC: Making the Effort Works! AASHTO and FHWA, U.S. Department of Transportation, Washington, D.C., 2002. American National Standards Institute (ANSI), North American Profile (NAP) of the ISO 19115: Geographic Information—Metadata, ANSI, Washington, D.C., 2009. American Public Works Association (APWA), “APWA Guid- ance Position Statement on Subsurface Utility Engineer- ing Surveys,” APWA, Washington, D.C. 2007 [Online]. Available: http://www.apwa.net/Documents/Advocacy/ Positions/Guidance/Revised%20SUE%20st. American Society of Civil Engineers (ASCE), CI/ASCE 38-02, Standard Guideline for the Collection and Depic- tion of Existing Subsurface Utility Data, ASCE, Reston, Va., 2002. Anspach, J. H., “Reducing Existing Underground Utility Risks on Airport Improvement Projects: Subsurface Util- ity Engineering,” Proceedings of the 25th International Air Transportation Conference, Austin, Tex., June 14–17, 1998. Anspach, J. H., “ASCE 38-02 and Airport GIS Systems,” Proceedings of the American Association of Airport Executives GIS Conference, Boston, Mass., 2004. Anspach, J. H., “Developing GIS Utility Information for Site Security Issues,” Proceedings of the American Associa- tion of Airport Executives GIS Conference, Dallas, Tex., 2005. Anspach, J., NCHRP Synthesis 405: Utility Location and Highway Design, Transportation Research Board of the National Academies, Washington, D.C., 2010, 44 pp. Anspach, J. H., “Collecting and Converting Two- Dimensional Utility Mapping to Three-Dimensional,” 89th Annual Meeting of the Transportation Research Board, Washing- ton, D.C., Jan. 10–14, 2010. Anspach, J. and M. McLaughlin, “VDOT’s Successful RFID Experiment,” Damage Prevention Professional Maga- zine, Fall 2011. refereNceS Ariatnum, S., Integrating GPS and Laser Technology to Map Underground Utilities Installed Using Open Trench Method, Construction Research Congress 2010, Innovation for Reshaping Construction Practice, 2010, pp. 627–636. Ball, M., “Autodesk Brings a BIM Approach to Utilities, Promoting Spatial Design for a Sustainable Tomorrow,” Spatial Sustain blog, Apr. 6, 2011 [Online]. Available: www.vector1media.com/spatialsustain. Canadian Standards Association (CSA), Mapping of Under- ground Utility Infrastructure, S250-11, Mississauga, ON, Canada, 2011. Code of Federal Regulations, Certification of Airports, Title 14—Aeronautics and Space, Part 139, Dec. 5, 2011. Construction Industry Institute (CII), Constructability: a Primer, University of Texas at Austin, 1986. Dziadak, K., “Model for the 3D Location of Buried Assets Based on RFID Technology,” Journal of Computing in Civil Engineering, Vol. 23, No. 3, 2009, pp. 148–159. Ellis, R., M. Venner, C. Paulsen, J. Anspach, G. Adams, and K. Vanderbergh, Integrating the Priorities of Transpor- tation Agencies and Utility Companies, SHRP2 Report S2-R15-RW, Transportation Research Board of the National Academies, Washington D.C., 2009. Federal Aviation Administration (FAA), Cable Cuts: Causes, Impacts, and Preventive Measures, Special Review, Safety Quality Assurance Division, Federal Aviation Adminis- tration, U.S. Department of Transportation, Washington, D.C., June 1993. Federal Aviation Administration (FAA), Subsurface Utility Damage Prevention, ANI Common Work Instruction, ANI1Q-QCW1342.1, FAA, Washington D.C., 2004. Federal Aviation Administration (FAA), Introduction to Safety Management Systems (SMS) for Airport Opera- tors, Advisory Circular 150/5200-37, FAA, Washington, D.C., 2007. Federal Aviation Administration (FAA), Underground Update (DVD), FAA Advanced Implementation Technologies Team, Washington, D.C., 2008. Federal Aviation Administration (FAA), General Guidance and Specifications for Submission of Aeronautical Sur- veys to NGS: Field Data Collection and Geographic Infor- mation System (GIS) Standards, 150/5300-18B, FAA, AAS-100, Office of Airport Safety & Standards–Airport Engineering Division, FAA, Washington, D.C., 2009. Federal Geographic Data Committee (FGDC), Content Stan- dard for Digital Geospatial Metadata (CSDGM), Version 2 (FGDC-STD-001-1998), Washington, D.C., 1998. Federal Highway Administration (FHWA), Subsurface Utility Engineering Handbook, Publication No. FHWA- PD-96-004, Office of Engineering, Federal-Aid Program Branch, Federal-Aid and Design Division, Washington, D.C., 1995.

37 Federal Highway Administration (FHWA), Cost Savings on Highway Projects Utilizing Subsurface Utility Engineer- ing, prepared by Purdue University Department of Build- ing Construction Management, FHWA Contract Number DTFH61-96-00090, FHWA, Washington, D.C., 1999. Geonics Corporation, User Manual for the EM-31, Missis- sauga, ON, Canada, 2000. Green, R. E., Generation of Utility Mapping Data via Pro- cessing of Multichannel Signals Collected by Arrays of Ground-Penetrating Radar and EM Antennae, 85th Annual Meeting of the Transportation Research Board, Washington, D.C., Jan. 22–26, 2006. International Organization for Standardization (ISO), Geo- graphic Information—Metadata (ISO-19115:2003), 2003. Nelson, N., “JFK Goes ‘SUE Happy,’ ” Airport Improve- ment Magazine, Washington D.C., Nov.–Dec. 2008. Nguyen, K. and J. Anspach, “Reducing Utility Damages that Affect Air Traffic Control Operations,” Proceedings of the Aviation Technical Committee Symposium, Federal Aviation Administration, Washington D.C., 2003. Noone, J. N., “Use of ASCE 38-02 and Subsurface Utility Engineering for Better Design, Cost Savings and Damage Prevention in Airport Planning and Design,” Proceedings of the Pipelines 2004 International Conference, American Society of Mechanical Engineers, Calgary, AB, Canada, 2004. One Hundred and Twelfth Congress of the United States of America, FAA Modernization and Reform Act of 2012 (H.R. 658), Feb. 14, 2012. Osman, H. and T. El-Diraby, Subsurface Utility Engineer- ing in Ontario: Challenges and Opportunities, Centre for Information Systems in Infrastructure and Construction, Department of Civil Engineering, University of Toronto, ON, Canada, 2005. Ott, J., “Airport Funding Reduced in 2012 FAA Budget,” Aviation Daily, Feb. 15, 2012. Pillar, R. L., J. Flemings, and S. Kutchins, “Case Study of the New DFW International Airport,” Proceedings of 8th International Conference on Automated People Movers, ASCE, 2001. Reid, H., “CAD, GIS Integration: Why Would You Want to Do This Anyway?” Directions On-line Magazine, Dec. 2003. Scott, C. P., “Subsurface Utility Engineering: An Engineer- ing Process for Obtaining Reliable Underground Infor- mation,” Routes/Roads, Vol. 4, No. 292, Oct. 1996. Singha, S. K., H. Thomas, M. Wang, and Y. Jung, Subsur- face Utility Engineering Manual, Pennsylvania State University, University Park, 2007. Sterling, R., J. Anspach, E. Allouche, J. Simicevic, C. Rog- ers, K. Weston, and K. Hayes, Encouraging Innovation in Locating and Characterizing Underground Utilities, SHRP2 Report S2-R01-RW, Transportation Research Board of the National Academies, Washington, D.C., 2009. Sterling, R., Utility Locating Technologies: A Summary of Responses to a Statement of Need, Federal Laboratory Consortium Special Reports Series No. 9, Washington, D.C., 2000. Sterling, R., E. Allouche, J. Anspach, J. Matthews, J. Ber- chmans, and J. Simicevic, Development of the Selection Assistant for Utility Locating Technologies, SHRP 2 Report S2-R01-RW-2, Transportation Research Board of the National Academies, Washington, D.C., 2011. The Survey Association (TSA), The Essential Guide to Utility Surveys, Issue 3, Mar. 2011, Nottinghamshire, U.K., 2011. U.S. Department of Agriculture (USDA), Ground- Penetrating Radar Soil Suitability Map of the Conterminous United States, Natural Resources Conservation Service, Washington, D.C., 2009. Young, G. N., Geophysical Mapping Versus Locating Utili- ties: Where Are We and Where Do We Go from Here? 89th Annual Meeting of the Transportation Research Board, Washington, D.C., Jan. 10–14, 2010. iNformative SourceS Consultant Prequalification Manual, Georgia Department of Transportation, Atlanta, Jan. 15, 2009 [Online]. Available: http://www.dot.state.ga.us/doingbusiness/consultants/ Documents/Consultant%20Prequalification%20Manual 11509.pdf. Damage Prevention, Safety Study NTSB/SS-97/01, National Transportation Safety Board, Washington, D.C., 1997. Description and Minimum Requirements for Prequalifica- tion, Illinois Department of Transportation, Springfield, Oct. 2011. Federal Aviation Administration (FAA), Airports Surveying, GIS Program, FAA, Washington, D.C. [Online]. Avail- able: https://airports-gis.faa.gov/public/faqs/index.html. Iowa Department of Transportation, SUE Prequalification Requirements, Ames. National Transportation Safety Board (NTSB), Protecting Public Safety Through Exca- vation, NTSB, Washington, D.C., 1994. Pennsylvania Department of Transportation (PennDOT), Costs for Subsurface Utility Engineering, Scopes of Work Survey, Utilities and Right-of-Way Section, Bureau of Design, Pennsylvania, Harrisburg, Feb. 28, 2008. Sample SUE & Utility Coordination Scope of Work for Con- sultant Services, Federal Highway Administration, U.S. Department of Transportation [Online]. Available: http:// www.fhwa.dot.gov/programadmin/htmldoc4.cfm. Costs for Subsurface Utility Engineering Scopes of Work Survey, Bureau of Design, Utilities and Right-of-Way Section, Pennsylvania, Harrisburg, Feb. 28, 2008. Subsurface Utility Engineering Pre-Qualification Require- ments, Ohio Department of Transportation, Columbus. Additional documents used for broad background on subsur- face utility engineering can be found on-line at http://www. fhwa.dot.gov/programadmin/suebibli.cfm.