Corrosion Prevention for Extending the Service Life of Steel Bridges (2018)

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

72 AASHTO, AASHTO LRFD Bridge Design Specifications, 6th ed., American Association of State Highway and Transportation Officials, Washington, DC, 2012. AASHTO/National Steel Bridge Alliance (NSBA) Steel Bridge Collaboration, Guide Specification for Applica- tion of Coating Systems with Zinc-Rich Primers to Steel Bridges, AASHTO/NSBA Steel Bridge Collabora- tion S 8.1—2014 SSPC-PA Guide 13, AASHTO/NSBA Steel Bridge Collaboration and The Society for Protective Coatings, 2014. Albrecht, P. and A.H. Naeemi, NCHRP Report 272: Performance of Weathering Steel in Bridges, National Research Council, Washington, DC, 1984. Albrecht, P., S.K. Coburn, F.M. Wattar, G.L. Tinklenberg, and W.P. Gallagher, NCHRP Report 314: Guidelines for the Use of Weathering Steel in Bridges, National Research Council, Washington, DC, 1989. Alland, K., J.M. Vandenbossche, R. Vidic, and X. Ma, Evaluation of Bridge Cleaning Methods on Steel Structures, Final Report FHWA-PA-2013-007-PIT WO 2, Pennsylvania Department of Transportation, 2013. Appleman, B.R., J.A. Bruno, and R.E.F. Weaver, Performance of Alternate Coatings in the Environment (PACE)— Part I: Ten-Year Field Data, Report FHWA-RD-89-127, Federal Highway Administration, Washington, DC, 1989a. Appleman, B.R., R.E.F. Weaver, and J.A. Bruno, Jr., Performance of Alternate Coatings in the Environment (PACE)—Volume II: Five-Year Field and Bridge Data of Improved Formulations, Report FHWA-RD-89-235, Federal Highway Administration, Washington, DC, 1989b. ArcelorMittal, Duracor/ASTM A1010: Bridge Applications and Fabrication Guidelines, September 2016 [Online]. Available: usa.arcelormittal.com [accessed December 29, 2016]. ASTM A709/A709M, “Standard Specification for Structural Steel for Bridges,” ASTM International, West Conshohocken, PA, 2016, www.astm.org. ASTM A1010/A1010M-13, “Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip,” ASTM International, West Conshohocken, PA, 2013, www.astm.org. ASTM G101-04, “Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels,” ASTM International, West Conshohocken, PA, 2015, www.astm.org. ASTM G140-02, “Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method,” ASTM International, West Conshohocken, PA, 2014, www.astm.org. Atlas Steels Technical Department, Atlas Steels Technical Handbook of Stainless Steels, Atlas Steels, 2013. Ault, J.P. and C. Farschon, “20-year Performance of Bridge Maintenance Systems,” JPCL, 2008. Ault, J.P. and C. Farschon, Adhesion Criteria between Water-Based Inorganic Zinc Coatings and Their Topcoats for Steel, FHWA-RD-98-170, March 1999. Ault, P., J. Ellor, J. Repp, and B. Shaw, Characterization of the Environment, Report FHWA-RD-00-030, Federal Highway Administration, Washington, DC, August 2000. Azizinamini, A., et al., Design Guide for Bridges for Service Life, SHRP 2 Report S2-R19A-RW-2, Transportation Research Board, Washington, DC, 2014. AZoM, “Stainless Steels: Introduction to the Grades and Families,” AZoM, May 16, 2001 [Online]. Available: https://www.azom.com/article.aspx?ArticleID=470 [accessed August 22, 2017]. Baddoo, N., Steel Design Guide 27: Structural Stainless Steel, American Institute of Steel Construction, Chicago, IL, 2013. Baddoo, N. and A. Kosmac, “Sustainable Duplex Stainless Steel Bridges,” n.d., [Online]. Available: www. worldstainless.org. Berman, J., C. Roeder, and R. Burgdorfer, Determining the Cost/Benefit of Routine Maintenance Cleaning on Steel Bridges to Prevent Structural Deterioration, WSDOT Research Report, Washington State Department of Transportation, Seattle, WA, September 2013. References

References 73 Chang, L. and S. Chung, Steel Bridge Protection Policy Volume II of V Evaluation of Bridge Coating System for INDOT Steel Bridges, Indiana Department of Transportation, West Lafayette, IN, 1999. Chang, L. and M. Georgy, Steel Bridge Protection Policy Volume III Metallization of Steel Bridges: Research and Practice, Indiana Department of Transportation, West Lafayette, IN, 1999a. Chang, L. and M. Georgy, Steel Bridge Protection Policy Volume V of V Warranty Clauses for INDOT Steel Bridge Paint Contracts, Indiana Department of Transportation, West Lafayette, I, 1999b. Chong, S-L and Y. Yao, “Are Two Coats as Effective as Three?” Public Roads, 70/2, 2006 [Online]. Available: https:// www.fhwa.dot.gov/publications/publicroads/06sep/06.cfm. Chong, S-L and Y. Yao, Laboratory and Test-Site Testing of Moisture-Cured Urethanes on Steel in Salt-Rich Envi- ronment, Report FHWA-RD-00-156, Federal Highway Administration, Washington, DC, December 2000. Crampton, D.D., K.P. Holloway, and J. Frazek, Assessment of Weathering Steel Bridge Performance in Iowa and Development of Inspection and Maintenance Techniques, Report 5300C, Iowa Department of Transportation, Ames, IA, 2013. Ellor, J.A., J. Repp, and W.A. Young, NCHRP Report 528: Thermally Sprayed Metal Coatings to Protect Steel Piling: Final Report and Guide, Transportation Research Board, Washington, DC, 2004. EN 1993-1-4. Eurocode 3: Design of Steel Structures—Part 1–4: General Rules—Supplementary Rules for Stainless Steels, European Standard, 1993. Farschon, C., M. Hewins, and C. Moran, “Repainting Bridges During Rehabilitation Projects: Sequencing Options,” Journal of Protective Coatings & Linings, Vol. 23, Issue 1, Pittsburgh, PA, January 2006. Farschon, C., R. Kogler, and P.J. Ault, Guidelines for Repair and Maintenance of Bridge Coatings: Overcoating, Report FHWA-RD-97-092, Federal Highway Administration, Washington, DC, August 1997. Federal Highway Administration (FHWA), Slip and Creep of Thermal Spray Coatings, Publication No. FHWA- HRT-14-083, U.S. Department of Transportation, McLean, VA, 2014. Federal Highway Administration (FHWA), Uncoated Weathering Steel in Structures, Technical Advisory 5140.22, Washington, DC, 1989. Federal Highway Administration (FHWA) Study Tour Team, Transportation Technology Evaluation Center, and International Technology Research Institute, FHWA Study Tour for Bridge Maintenance Coatings, FHWA, U.S. Department of Transportation, Washington, DC, June 1997. Fletcher, F.B., Improved Corrosion-Resistant Steel for Highway Bridge Construction, Report FHWA-HRT-11-062, Federal Highway Administration, McLean, VA, 2011. Fletcher, F.B., A.D. Wilson, J. Strasky, J.N. Kilpatrick, T. Mlcoch, and J.S. Wrysinski, “Stainless Steel for Acceler- ated Bridge Construction,” Proceedings of the FHWA Accelerated Bridge Construction Conference, San Diego, CA, 2005. Fletcher, F.B., H.E. Townsend, and A.D. Wilson, “Corrosion Performance of Improved Weathering Steels for Bridges,” Proceedings of the National Steel Bridge Alliance World Steel Bridge Symposium, Orlando, FL, 2003. Florida Department of Transportation (FDOT), Structures Detailing Manual, Volume 2, Florida Department of Transportation, 2017. Gedge, G., “Use of Duplex Stainless Steel Plate for Durable Bridge Construction,” Proceedings of the IABSE Symposium Weimar 2007, Improving Infrastructure Worldwide, Weimar, Germany, 2007. Hara, S., T. Kamimura, H. Miyuki, and M. Yamashita, “Taxonomy for Protective Ability of Rust Layer Using Its Composition Formed on Weathering Steel Bridge,” Corrosion Science, Vol. 49, 2007, pp. 1131–1142. Hopwood, T., II, S. Palle, B. Meade, R. Younce, D. Wells, and C. Goff. Spot Painting to Extend Highway Bridge Coat- ing Life. NCHRP Web-Only Document, Vol. 2: Research Overview, Transportation Research Board, 2018. Available: https://doi.org//10.17226/22617. Iowa Department of Transportation, Bridge Inspection Manual, Project No. TR-646, Iowa Highway Research Board, Ames, IA 2015a. Iowa Department of Transportation, Evaluation of Performance of A1010 Bridge Steel, RB10-016, TRID: the TRIS and ITRD database, 2015b [Online]. Available: https://trid.trb.org/view/1376311 [accessed January 4, 2017]. Iowa Department of Transportation Office of Bridges and Structures, LRFD Bridge Design Manual, Iowa DOT, 2017. Johnson, J., “Is Plain Water Washing Effective Enough? Chloride, Sulfate, and Nitrate Salts on Bridges and Their Removal,” JPCL, September 2003. Koch, G.H., M.P.H. Brongers, N.G. Thompson, Y.P. Virmani, and J.H. Payer. Corrosion Costs and Preventive Strategies in the United States, Report FHWA-RD-01-156, FHWA, U.S. Department of Transportation, September 30, 2002. Kogler, R. Steel and Bridge Design Handbook: Corrosion Protection of Steel Bridges, Report FHWA-HIF-16-002- Vol. 19, Federal Highway Administration, Washington, DC, 2015. Kogler, R. and W. Mott, Environmentally Acceptable Materials for the Corrosion Protection of Steel Bridges: Task C, Laboratory Evaluation, Report No. FHWA-RD-91-060, Federal Highway Administration, Washington, DC, September 1992.

74 Corrosion Prevention for Extending the Service Life of Steel Bridges Kogler, R., J.P. Ault, and C. Farschon, Environmentally Acceptable Materials for the Corrosion Protection of Steel Bridges, Report No. FHWA-RD-96-058, Federal Highway Administration, Washington, DC, January 1997. KTA-Tator, Investigation of the Effect of Chlor*Rid on Removing Chloride and Sulfate Contamination, November 1995. KTA-Tator, Transportation Agency Practices Currently Employed for Bridge Maintenance Painting Operations: Findings from a National Survey, Transportation Research Synthesis TRS 1404, Minnesota Department of Transportation, St. Paul, March 2014. Kuchta, K. and I. Tylek, “Application of Stainless Steels in Building Structures,” Technical Transactions, Vol. 3-B, 2013. Kulicki, J.M., Z. Prucz, D.F. Sorgenfrei, and D.R. Mertz, NCHRP Report 333: Guidelines for Evaluating Corrosion Effect in Existing Steel Bridges, Transportation Research Board, Washington, DC, 1990. Lau, K., Corrosion Evaluation of Novel Coatings for Steel Components of Highway Bridges, Tallahassee, FL, 2015. Lindsley, M., “Galvanized Steel Bridges,” 2015 [Online]. Available: http://www.galvanizeit.org/. McConnell, J., H.W. Shenton III, and D.R. Mertz, “Evaluation of Unpainted Weathering Steel Highway Bridge Performance,” LTBP News, May 2014. McDad, B., D. C. Laffrey, M. Dammann, and R. D. Medock, Use of Weathering Steel in TxDOT Structures, Project 0-0818, Texas Department of Transportation, Austin, 2000. Medlock, R., “Fabrication Perspectives about Various Durability Solutions,” Presented at TRB Annual Meeting, Washington, DC, January 2017. NACE, Corrosion Control Plan for Bridges, NACE International, Houston, Tex., 2012 [Online]. Available: www.nace.org. Neal, T.W., NCHRP Synthesis 257: Maintenance Issues and Alternate Corrosion Protection Methods for Exposed Bridge Steel, Transportation Research Board, Washington, DC, 1998. North Carolina Department of Transportation (NCDOT), Structures Management Unit Manual, North Carolina Department of Transportation, 2016. Palle, S., R. Younce, and T. Hopwood II, Investigation of Soluble Salts on Kentucky Bridges, Kentucky Transporta- tion Center, University of Kentucky, Lexington, January 2003. Research Council of Structural Connections (RCSC), Specification for Structural Joints Using High-Strength Bolts, RCSC, Chicago, IL, 2014. Seradj, H., “Oregon’s Experience with ASTM A1010,” Proceedings of the TRB 2015 Annual Meeting, Oregon Department of Transportation, 2015. Sharp, S., W. Via, and A. Moruza, “Virginia’s Initial Experience with an ASTM A1010 Plate Girder Bridge,” Proceedings of the TRB 96th Annual Meeting, Virginia Department of Transportation, 2017. Smith, L.M. and G.L. Tinklenberg, Lead-Containing Paint Removal, Containment, and Disposal, Report FHWA- RD-94-100, Federal Highway Administration, Washington, DC, February 1995. Society for Protective Coatings (SSPC), Guide-6: Guide for Containing Surface Preparation Debris, SSPC, Pittsburgh, PA, 2015. Society for Protective Coatings (SSPC) TU-3, Technology Update No. 3, Overcoating, SSPC, 2004. Successful Preservation Practices for Steel Bridge Coatings, Scan Team Report NCHRP Project 20 68A, Scan 15-03, National Cooperative Highway Research Program, Washington, DC, October 2016. Tagnoli, J., Bridge Detailing Guide, Texas Department of Transportation, 2016. Van Eijnsbergen, J.F.H., Duplex Systems: Hot-dip Galvanizing Plus Painting, Elsevier, Amsterdam, Netherlands, 1994. Yao, Y., P. Kodumuri, and S-K Lee, Performance Evaluation of One-Coat Systems for New Steel Bridges, Publica- tion No. FHWA-HRT-11-046, Federal Highway Administration, U.S. Department of Transportation, 2011. Zoller, J., “The Memorial Bridge, Design Innovations and Fabrication Challenges,” presented at the Mid-Atlantic States QA Workshop, Atlantic City, NJ, February 5, 2014.