National Academies Press: OpenBook
« Previous: Chapter 5 - Conclusions and Needs for Future Research
Page 67
Suggested Citation:"Abbreviations and Acronyms." National Academies of Sciences, Engineering, and Medicine. 2021. Electrochemical Test Methods to Evaluate the Corrosion Potential of Earthen Materials. Washington, DC: The National Academies Press. doi: 10.17226/26076.
×
Page 67

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

67 CL centerline cm centimeter CR corrosion rate DI deionized DOT department of transportation ft foot/feet g gram GB granular base GN grading number GP poorly graded gravel GW well-graded gravel h hour Hz hertz IEC ion exchange chromatography in. inch LWF lightweight fill mEq milliequivalent MIC microbially induced corrosion min minute ml milliliters mm millimeters MSE mechanically stabilized earth M-U-D Marcy-Utica-Deerfield PIP Palisades Interstate Parkway PP percentage passing ppm parts per million RI ranking index SP poorly graded sand SW well-graded sand USCS Unified Soil Classification System UTEP The University of Texas at El Paso Ω · cm ohm · centimeter Abbreviations and Acronyms

Next: References »
Electrochemical Test Methods to Evaluate the Corrosion Potential of Earthen Materials Get This Book
×
 Electrochemical Test Methods to Evaluate the Corrosion Potential of Earthen Materials
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

There is a need to identify new or improved laboratory and field test methods to measure the electrochemical properties of earthen materials surrounding buried or embedded steel elements.

The TRB National Cooperative Highway Research Program's NCHRP Research Report 958: Electrochemical Test Methods to Evaluate the Corrosion Potential of Earthen Materials presents a protocol for evaluating the corrosion potential of earthen materials in contact with steel highway structures.

READ FREE ONLINE

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  6. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  7. ×

    View our suggested citation for this chapter.

    « Back Next »
  8. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!