Appendix L
Table of MDV R&D Technical Capabilities Needed for the Nuclear Fuel Cycle, Nuclear Test Explosions, and Arms Control
MDV for the Nuclear Fuel Cycle | MDV for Nuclear Test Explosions | MDV for Arms Control | |
---|---|---|---|
Data Analytics, Integration, and Systems Analysis |
|
||
Authentication, Certification, and Validation |
|
||
Inspection Capability |
|
|
|
MDV for the Nuclear Fuel Cycle | MDV for Nuclear Test Explosions | MDV for Arms Control | |
---|---|---|---|
On-Site Radiation Detection and Characterization |
|
|
|
Unattendeda On-Site Monitoring |
|
|
|
Environmental Monitoringb |
|
|
|
Stand-off Monitoring |
|
|
|
MDV for the Nuclear Fuel Cycle | MDV for Nuclear Test Explosions | MDV for Arms Control | |
---|---|---|---|
Item Counting |
|
|
a Unattended systems operate autonomously with no operator intervention needed other than installation and perhaps periodic maintenance. These systems may be stand-off or onsite, and may be permissive or non-permissive.
b Environmental monitoring can be conducted inside and immediately outside nuclear facilities, as well as at much further distances from a known/unknown facility.
c Overhead refers to MDV by satellite, airplane, and/or drone.
This page intentionally left blank.