National Academies Press: OpenBook
« Previous: 5 Systems Approach to Concrete Technology
Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×

References

ACI Committee 544. 1986. State-of-the-Art Report on Fiber Reinforced Concrete. 544.1R-82. Detroit, Mich.: American Concrete Institute.

ACI. 1995. Manual of Concrete Practice, vol. 1. Detroit, Mich.: American Concrete Institute.

Ashby, M.F. 1992. Materials Selection in Mechanical Design. New York: Pergamon.

Banfill, P.F.G. 1993. Structure and rheology of cement-based systems. In Flow and Microstructure of Dense Suspensions, L.J. Struble, C.F. Zukoski, and G.C. Martland (eds.). Proceedings of the MRS Symposium, vol. 289. Pittsburgh, Pa.: Materials Research Society.

Banthia, N., and S. Mindess (eds). 1995. Fiber Reinforced Concrete: Modern Developments. Vancouver, Canada: University of British Columbia Press.

Bentur, A., and S. Mindess. 1990. Fiber Reinforced Cementitious Composites. London: Elsevier.

Bentz, D.P., P.V. Coveney, E.J. Garboczi, M.F. Kleyn, and P.E. Stutzman. 1994. Cellular automaton simulations of cement hydration and microstructure development. Modeling Simulated Materials Science and Engineering 2:783-808.

Chappuis, J. 1991. Rheology of Fresh Cement and Concrete. Cambridge: Cambridge University Press.

Chu, T.-J., J.-H. Kim, C. Park, and R.E. Robertson. 1994. Effects of poly[vinyl alcohol] on fiber cement interfaces, part II: micro-structure. Advances in Cement-Based Materials 1:122.

Crumbie, A.K., K.L. Scrivener, and P.L. Pratt. 1989. Pore structure and permeability of cementitious materials. Pp. 279–284 in MRS Symposium Proceedings, vol. 137. Pittsburgh, Pa.: Materials Research Society.

Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×

Davis, M.A., D.G. Bellemore, A.D. Kersy, M.A. Putnam, E.J. Friebele, R.L. Idriss, and M. Kodinduma. 1996. High sensor-count bragg grating instrumentation system for large-scale structural monitoring applications. Pp. 1–7 in Proceedings of the SPIE. San Diego, California: SPIE.

DOT (U.S. Department of Transportation). 1995. 1995 Status of the Nation's Surface Transportation System: Condition and Performance. Federal Highway Administration, Department of Transportation. Washington, D.C.: DOT.

Fibermesh Company Product Literature. 1995. Chattanooga, Tenn.: Fibermesh Co.

Gorur, K., M.K. Smit, and F.H. Wittmann. 1982. Microwave study of hydrating cement paste at early age. Cement and Concrete Research 12:447–454.

Hannaut, D.J. 1978. Fibre Cements and Fibre Concretes. New York: John Wiley and Sons.

Hansson, C.M. 1995. Concrete: the advanced industrial material of the 21st century. Metallurgical and Materials Transactions A 26A(June):1321–1341.

Henrichsen, D. 1996. National Materials Advisory Board, National Research Council Workshop on Nonconventional Concrete Technologies for Renewal of the Infrastructure . Washington, D.C.

Hutchison, R.G., J.T. Chang, H.M. Jennings, and M.E. Brodwin. 1991. Thermal acceleration of Portland cement mortars with microwave energy . Cement and Concrete Research 21:795–799.

Jensen, A.D., E. Eriksen, S. Chatterji, N. Thaulow, and I. Brandt. 1985. Beton-teknik: Strukturanalyse af beton. Aalborg, Denmark: Cementfabrikkernes tekniske oplysningskontor, Aalborg Portland Cement Fabrik.

Johnson, D.L. 1996. National Materials Advisory Board, National Research Council Workshop on Nonconventional Concrete Technologies for Renewal of the Infrastructure . Washington, D.C.

Keer, J.G. 1984. Fiber reinforced concrete. Pp. 2–105 in New Reinforced Concretes: Concrete Technology and Design, vol. 2, R.N. Swamy (ed.). Surrey, Great Britain: Surrey University Press.

Lea, F.M., and T.W. Parker. 1964. In Phase Diagrams for Ceramists, E.M. Levin, C.R. Robbins, and H.F. McMurdie (eds). Columbus, Ohio: American Ceramic Society.

Lin, X., M.R. Silsbee, D.M. Roy, K. Kessler, and P.R. Blankenhorn. 1994. Approaches to improve the properties of wood fiber reinforced cementitious composites. Cement and Concrete Research 24(8):1558–1566.

Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×

Livingston, R.A., D.A. Neumann, A. Allen, and J.J. Rush. 1995. Application of neutron scattering methods to cementitious materials . Pp. 459–469 in Materials Research Society Symposium Proceedings, vol. 376. Pittsbugh, Pa.: Materials Research Society.

Majumdar, A.J., and V. Laws. 1991. Glass Fibre Reinforced Cement. Oxford: Blackwell.

McCarter, W.J., and P.N. Curan. 1984. The electrical response characteristic of setting cement paste. Magazine of Concrete Research 36:42–49.

Mehta, P.K. 1986. Concrete: structure, properties and materials. In International Series in Civil Engineering and Engineering Mechanics , W.J. Hall (ed). Englewood Cliffs, N.J.: Prentice-Hall, Inc.

Moff, G. 1996. Presentation at ACI/CANMET Conference on Concrete in Marine Environments, St. Andrews by the Sea, Canada.

Naik, T.R., and B.W. Ramme. 1987. Determination of the water content of concrete by the microwave method . Cement and Concrete Research 17:927–938.

NRC (National Research Council). 1987. Concrete Durability: A Multibillion-Dollar Opportunity. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

NRC. 1988. The Impact of Supercomputing Capabilities on U.S. Materials Science and Technology. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

NRC. 1989. Materials Science and Engineering for the 1990s: Maintaining Competitiveness in the Age of Materials. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

NRC. 1991. Enabling Technologies for Unified Life-Cycle Engineering of Structural Components. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

NRC. 1993. Materials Research Agenda for the Automotive and Aircraft Industries . National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

NRC. 1995a. Expanding the Vision of Sensor Materials. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

NRC. 1995b. Materials for High-Temperature Semiconductor Devices. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×

NRC. 1995c. Computer-Aided Materials Selection During Structural Design. National Materials Advisory Board, National Research Council. Washington, D.C.: National Academy Press.

Osborn, E.F., and A. Muan. 1964. In Phase Diagrams for Ceramists, E.M. Levin, C.R. Robbins, and H.F. McMurdie (eds). Columbus, Ohio: American Ceramic Society.

Perez, M., and D.M. Roy. 1984. Electrical properties of normal and high strength cementitious materials . American Ceramics Society Bulletin. March.

Perez-Pena, M. 1986. Electrical conductivity and dielectric studies of hydraulic cements. Ph.D. thesis. The Pennsylvania State University, University Park, Pa.

Perez-Pena, M., D.M. Roy, A.S. Bhalla, and L.E. Cross. 1986. Dielectric properties of densified hardened cementitious materials . Cement and Concrete Research 16:951–966.

Perez-Pena, M., D.M. Roy, and F.D. Tamas. 1989. Influence of chemical composition and inorganic admixtures on the electrical conductivity of hydrating cement pastes. Journal of Materials Research 4(1):215–223.

Perez-Pena, M., D.M. Roy, P. Kistler, M.T. Lanagan, and L.E. Cross. 1989. Cementitious materials for electronic packaging: I. processing, electrical and mechanical properties of chemically bonded ceramics: SiO2-amorphous/Ca3SiO5 Composites. Pp. 279–285 in Ceramic Substrates and Packages for Electronic Applications, M.Y. Yan, H.M. O'Bryan, Jr., K. Niwa, and W.S. Young (eds). Advances in Ceramics, vol. 26. Columbus, Ohio: American Ceramic Society.

Popovics, S. 1992. Concrete Materials. Park Ridge, N.J.: Noyes Data Corporation.

Robertson, R.E. 1995. Poly[vinyl alcohol] as an admixture in cement. ACBM Cementing the Future. 7(1):4.

Roy, D.M., and K. Asaga. 1979. Rheological properties of cement mixes, III: the effects of mixing procedures on viscometric properties of mixes containing superplasticizers . Cement and Concrete Research 9(6):731–740.

Sakai, E., and M. Daimon. 1995. Mechanisms of superplastification. Pp. 91-113 in Materials Science of Concrete, vol. 4, J. Skalny and S. Mindess (eds). Westerville, Ohio: American Ceramic Society.

Shah, S.P., and A. Winter. 1968. Inelastic Behavior and Fracture of Concrete. Pp. 5–28 in Proceedings of the Symposium on Causes, Mechanism, and Control of Cracking in Concrete. SP #20. Detroit, Mich.: American Concrete Institute.

Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×

Scrivener, K. 1984. Ph.D. thesis. Imperial College, London.

Soroka, I. 1979. Portland Cement Paste and Concrete. London: MacMillan Press, Ltd.

Taylor, H.F.W. 1990. Cement Chemistry. London: Academic Press.

Van Humbeeck, J.V., I.D. Reynaerts, and J.P. Katholieke. 1996. New opportunites for shape memory alloys for actuators, biomedical engineering, and smart materials. Mat Tech 11(2):55–61.

Wang, Y. 1996. National Materials Advisory Board, National Research Council Workshop on Nonconventional Concrete Technologies for Renewal of the Infrastructure . Washington, D.C.

Wang, Y., S. Backer, and V.C. Li. 1987. An experimental study of synthetic fiber-reinforced cementitious composites. Journal of Materials Science 22:4281–4291.

Wang, Y., A.H. Zureick, B.S. Cho, and D.E. Scott. 1994. Properties of fiber reinforced concrete using recycled fibers from carpet industrial waste. Journal of Materials Science 29(16):4191–4199.

Wu, X., J. Dong, and M. Tang. 1987. Microwave curing technique in concrete manufacture. Cement and Concrete Research 17:205–210.

Yang, M., and H.M. Jennings. 1993. On the development of rheological properties of cement paste during the induction period. In Flow and Microstructure of Dense Suspensions, L.J. Struble, C.F. Zukoski, and G.C. Martland (eds.). Proceedings of the MRS Symposium, vol. 289. Pittsburgh, Pa.: Materials Research Society.

Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×
Page 86
Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×
Page 87
Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×
Page 88
Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×
Page 89
Suggested Citation:"References." National Research Council. 1997. Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure. Washington, DC: The National Academies Press. doi: 10.17226/5560.
×
Page 90
Next: Appendix A: Workshop Participants »
Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure Get This Book
×
Buy Paperback | $58.00 Buy Ebook | $46.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure identifies research and development opportunities in innovative, nonconventional materials and processes that have the potential to accelerate the construction process, improve the durability of highway pavement and bridges, and enhance the serviceability and longevity of new construction under adverse conditions.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!