National Academies Press: OpenBook

Report on Draft 4 of the Standards: October 28, 1999 (1999)

Chapter: Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee

« Previous: Appendix E: Technical Reviewer Comments, Draft 4
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×

APPENDIX F

ITEA Standards Review Committee

21–22 May 1999 Meeting Minutes

International Technology Education Association (ITEA) Standards Review Committee

National Research Council

2001 Wisconsin Avenue, NW

Green Building, Room 116

Washington, DC

21–22 May 1999

Meeting Minutes

Members:

Wm A.Wulf, chair*

Alice Agogino*

Karin Borgh

Rodney Custer

Elsa Garmire

Franzie Loepp

James Rutherford

Scott Warner

Jane Wheeler

Staff:

Rodger Bybee

Gail Pritchard

Greg Pearson, NAE

Lisa Vandemark

DeVonne Robertson

Sonja Atkinson

Guests:

Bill Dugger, Director, Technology for All Americans Project (TfAAP)

Pam Newberry, TfAAP

Robert Pool, freelance writer for TfAAP

Jill Russell, University of Nebraska, and external evaluator for TfAAP

Melissa Smith, TfAAP

Kendall Starkweather, Executive Director, ITEA

Bridget Valesy, ITEA

Arvid Van Dyke, ITEA

*  

indicates member was not present at meeting.

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×

Friday, 21 May, 1999

Introduction and Welcome; Background and Statement of Task

At 2pm, Rodger Bybee (RWB) welcomed the committee on behalf of Bill Wulf, NAE president and chair of the ITEA Standards Review Committee. Introduction of members, staff, and guests were made. He then provided background on the impetus for the study and the development of the statement of task. This project was conceived as a mirror of the NRC’s internal review process, which operates generally in this manner: Following the initial completion of a project, a group of external peer reviewers assesses the document and offers comments for improvement. These reviewer comments then guide the final revision of the document.

Composition and Balance Discussion

RWB conducted the NRC’s Composition and Balance Discussion per NRC guidelines.

Background and Rationale for Current Framework and Draft Standards

William Dugger, Jr., principal investigator of the Technology for All Americans Project, presented background information on TfAAP, and the rationale behind the current framework and draft Standards. He identified five major problems that the series of reviews had identified:

Major Concerns on Draft III:

  • Organizers and Framework of the Standards (Universals and Dimensions)

  • Writing Style

  • Articulation of Standards (Grades K–12)

  • Differences between Technology and Technology Education

  • Format of the Standards

Plenary Discussion

The committee focused its discussion on the Proposed Framework for Standards for Technology Education: Content for the Study of Technology (Briefing Book Tab D). Members began discussion on the (original) 5 overarching standards:

  1. The Nature of Technology

  2. Technology and Society

  3. Technological Design

  4. Abilities for a Technological World

  5. The Designed World

Wrap-Up

  • Generally, all members thought the 5 overarching categories were broad enough yet clear, focused, and flexible enough to contain the fundamental aspects of technology that students should learn in grades K–12. The order of the standards was fine.

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
  • Members generally concurred that 3. “Technological Design,” should be modified to just “Design.”

Saturday, 22 May

Plenary Discussion

RWB began the plenary session by summarizing the goals of the second day of discussion: to review the content of each category; and to attend to content, structure, and form of standards (Tab D). He summarized some of the committee’s general concerns raised in the opening plenary discussion about the standards—audience, gradebands, themes—and stated that these issues could be considered while discussing each category.

Category #1, “The Nature of Technology,”and #2, “Technology and Society.”

Some members considered whether 1.3, “The Relationships Between Technology and Other Fields of Study,” would also capture the relationship between technologies or the influence of preceding technologies on subsequent technologies but decided not to wordsmith the Standards excessively to avoid diluting the power of them or else making them too dense or unrealistically ambitious.

Members also discussed the placement of history in the framework—whether it should be contained within category #1, or split between category #1 and #2—but finally concluded that it’s placement signified its inherent importance as a Standards topic. There was some discussion of leading category 2 with “The History of Technology,” (i.e., making current 2.4 into 2.1), but were persuaded that the order was not crucial. Members were reminded that the Standards need not be taught sequentially, (although there might be a tendency toward that strategy).

Wrap-Up

  • The committee generally concluded that categories #1 and #2 were fine as is.

  1. The Nature of Technology

    As a result of an education in technological studies, students should develop an understanding of:

    1.1 The Scope of Technology

    1.2 Basic Concepts of Technology

    1.3 The Relationships Between Technology and Other Fields of Study

  2. Technology and Society

    As a result of an education in technological studies, students should develop an understanding of:

    2.1 The Influence of Technology on Society

    2.2 The Influence of Technology on the Environment

    2.3 The Influence of Society on Technology

    2.4 The History of Technology

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×

Category #3, “Technological Design,” and Category #4, “Abilities for a Technological World.”

The committee agreed category #3 should be abbreviated to “Design.”

The committee identified some problems within these two categories. Members thought that combining conceptual understanding and skills was mixing ends and means. Although the technology education field expects Standards to combine understanding with activity, committee members thought that, in practice, understanding design might be overlooked or sacrificed for the action of designing. Members generally agreed that understanding design was difficult, so segregating it from the act of designing encouraged substantial discussion before students moved into designing.

One member thought category 4 as it was originally organized was a clear description of pedagogy, but whose outcomes would be conceptual—another instance of actions leading to understanding, and the mixing of ends and means. He was confused by the intellectual challenge being proposed—either the ability to do or the ability to understand.

Members had a debate about the drawbacks of splitting conceptual and designing apart, but finally agreed that the loads for category #3 and #4 were more logical and manageable in their new structure, and that the introduction to the Standards, the category, or the preface could impress upon readers the strong linkage between category #3 and #4 and the importance of “doing design” in general. Members reiterated that the goals of #3 would be grounded in the understanding of doing design, so that students were prepared to actually do design. Finally, one person commented that, in the structure and writing of each Standard, particular areas could be emphasized for effect— conceptual in the foreground in #3, ability in the foreground in #4. Ultimately, members decided that the most important and appropriate issues would be satisfactorily captured between category #3 and #4.

Members also discussed the issues of individual learning goals and diverse skill-levels and generally agreed that the Standards should promote a reasonably high general knowledge base (which included undertaking technological design), but more to develop the ability to understand and discuss technology on a professional level, rather than to develop the skills of a technician. Standards should present an end goal, with doing as a means toward deeper understanding, which would promote general technological literacy.

Wrap-Up

  • Members recommended developing category #3 to understand design and organize category #4 to do design. One person commented that #3 could be organized as understanding the Design Method (like understanding the Scientific Method), then doing the Design Method in #4.

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
  1. Design

    As a result of an education in technological studies, students should develop an understanding of:

    3.1 The Attributes of Design

    3.2 An Engineering Design Process

    3.3 Other Problem-Solving Strategies

  2. Abilities for a Technological World

    As a result of an education in technological studies, students should be able to:

    4.1 Apply the Attributes of Design

    4.2 Use and Maintain Technological Products and Systems

    4.3 Manage and Assess the Products and Systems

Category #5, “The Designed World”

Members were comfortable on the overarching category, “The Designed World.” However, they were split on how to handle the divisions within category #5. One member was extremely uncomfortable with 5.1, Biotechnologies, because “The term “biotechnologies” is not typically used, i.e. “biotechnology” is the common term. “Biotechnology” utilizes molecular biology techniques in various applications, e.g. in fields such as agriculture, envrionmental remediation (bioremediation), and medicine.” Another thought the categories forced another layer to wade through. Members thought that technology cut across disciplines and encourages greater interdisciplinary experiences. Technology is an access point between disciplines. One member suggested handling this section by coordinating discussion around traditional technology education foci: transportation, communication, manufacturing, healthcare. Another member suggested structuring it similar to chapter 8 in Benchmarks (agriculture, materials and manufacturing, energy sources and use, communication, information processing, health technology), but adding warfare, entertainment, and transportation, thereby building on an already-published and widely disseminated document.

Another member commented that she could support a disciplinary division—biological sciences, chemical sciences, informational sciences, physical sciences. But a member countered that the Standards should encourage students to deal with their world and not scientific abstractions. Another suggestion was biological world, physical world, informational world, or else survival (agriculture, housing), quality of life (agriculture, communications), and luxury technologies (entertainment), or to divide by technologies and not scientific point of view.

One member speculated some topics that might come under these general headings. For instance, under physical sciences, Standards could concentrate on energy, transportation.

Another member suggested:

  • agriculture

  • production—materials and manufacturing

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
  • energy and power

  • communication and information (entertainment),

  • transportation

  • health technology

One member recommended that ITEA develop the benchmarks, then decide how to group or structure them.

Wrap-Up

  • Members concluded that they preferred the category focused on applications approaches, but there was room for negotiation on this point as ITEA developed the accompanying benchmarks. However, the recommended structure would be more favorably received by the engineering community; it could encourage career connections more clearly, and perhaps make developing benchmarks easier.

  • Format of Standards: Members generally agreed that the categories and benchmarks needed to be in sentence format to provide some context up front.

    • The committee strongly endorsed the development of the K–12 technology standards, but believed that teachers, administrators and other interested parties could comprehend the standards better and therefore be more likely to integrate them into the curriculum, if the structure was comparable to previously published standards efforts. Members considered the AAAS document, Benchmarks for Science Literacy (particularly), or the National Science Education Standards, as excellent structural models for the technology standards and cautioned that if another model is adopted, the rationale behind the selection should be clear. Members were pleased with the AAAS Benchmarks document structure and encouraged ITEA to consider constructing its standards similarly. Model follows:

    • CATEGORY—Essay

      Standard 1—Essay

      K–2

      Essay

      Benchmarks

      3–5

      Essay

      Benchmarks

      6–8

      Essay

      Benchmarks

      9–12

      Essay

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×

Benchmarks

Standards 2

K–2

Essay

Benchmarks

Standard 3

  • CATEGORY

    This style shows growth of concept over a k–12 career. This would organize the standards/categories rather than grade band, as they were currently structured. One member commented that the grade bands could be color-coded for easy reference.

  • One member commented that the language used in each category would be less critical if the benchmarks came at the end of the introduction, rather than the beginning. It would also be a powerful (“punchy”) ending to each section. The committee generally agreed that this would be a preferred structure for the benchmarks.

  • Members recommended that ITEA be conservative on the number of benchmarks for each grade band, perhaps 2 or 3 in the elementary grades, 6 maximum, and a persuasive rationale for a greater number than that.

  • Members wanted a grade-level appropriate lead in to each band of Standards using teacher-friendly, age-appropriate words. They were also concerned that there be some differentiation between the college-bound and school-to-work tracks.

  • Members were in favor of a glossary or of a section for each category that called out particular terms.

  • Members encouraged avoiding passive wording, such as “should develop an understanding.”

Wrap-Up/Other Issues:

  • The committee discussed other ongoing NRC projects related to this project, i.e., the NAE’s Committee on Technological Literacy and the National Science Education Standards Science and Technology Addendum and recommended that staff collaborate to be sure projects collectively send a coherent message.

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
  • Members strongly encouraged cross-referencing to other standards documents where applicable (such as the Principles and Standards of School Mathematics, National Science Education Standards, Benchmarks, etc.) They encouraged consistency with the other Standards documents.

  • Members agreed to review the direction that ITEA was heading in in relation to this meeting’s discussion to be sure they were on the right track, perhaps via a conference call. As any discussion draft will be available to the general public through out public access office, members reminded ITEA to write DRAFT on each page.

RWB thanked the members, on behalf of Bill Wulf, for their work, cooperation, and candor, which helped to clarify the framework and therefore improved standards. Members commended ITEA staff and writers for their hard work, which had noticeably improved the standards already.

The meeting was adjourned at 4pm.

Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 93
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 94
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 95
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 96
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 97
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 98
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 99
Suggested Citation:"Appendix F: Discussion Summary, May 21-22 Meeting of the NRC Standards Review Committee." National Research Council. 1999. Report on Draft 4 of the Standards: October 28, 1999. Washington, DC: The National Academies Press. doi: 10.17226/9763.
×
Page 100
Report on Draft 4 of the Standards: October 28, 1999 Get This Book
×
MyNAP members save 10% online.
Login or Register to save!
  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!