National Academies Press: OpenBook

Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary (2000)

Chapter: Appendix D Naval Facilities Engineering Command Guide Specification 01781

« Previous: Appendix C Document Type Definition Document
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

APPENDIX D

Naval Facilities Engineering Command Guide Specification 01781

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

************************************************************************

DEPARTMENT OF THE NAVY

NAVAL FACILITIES

ENGINEERING COMMAND

GUIDE SPECIFICATION

NFGS-01781C

31 March 1998

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Superseding NFGS-01781B (09/96)

************************************************************************

SECTION TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

SECTION 01781

OPERATION AND MAINTENANCE DATA

03/98

   

PART 1 GENERAL

 
   

1.1 SUBMISSION OF OPERATION AND MAINTENANCE DATA

 
   

1.1.1 Quantity

 
   

1.1.2 Package Quality

 
   

1.1.3 Package Content

 
   

1.1.4 Delivery

 
   

1.1.5 Changes to Submittals

 
   

1.2 TYPES OF INFORMATION REQUIRED IN O&M DATA PACKAGES

 
   

1.2.1 Operating Instructions

 
   

1.2.1.1 Safety Precautions

 
   

1.2.1.2 Operator Prestart

 
   

1.2.1.3 Startup, Shutdown, and Postshutdown Procedures

 
   

1.2.1.4 Normal Operations

 
   

1.2.1.5 Emergency Operations

 
   

1.2.1.6 Operator Service Requirements

 
   

1.2.1.7 Environmental Conditions

 
   

1.2.2 Preventive Maintenance

 
   

1.2.2.1 Lubrication Data

 
   

1.2.2.2 Preventive Maintenance Plan and Schedule

 
   

1.2.3 Corrective Maintenance (Repair)

 
   

1.2.3.1 Troubleshooting Guides and Diagnostic Techniques

 
   

1.2.3.2 Wiring Diagrams and Control Diagrams

 
   

1.2.3.3 Maintenance and Repair Procedures

 
   

1.2.3.4 Removal and Replacement Instructions

 
   

1.2.3.5 Spare Parts and Supply Lists

 
   

1.2.3.6 Corrective Maintenance Work-Hours

 
   

1.2.4 Appendices

 
   

1.2.4.1 Parts Identification

 
   

1.2.4.2 Warranty Information

 
   

1.2.4.3 Personnel Training Requirements

 
   

1.2.4.4 Testing Equipment and Special Tool Information

 
   

1.2.4.5 Contractor Information

 
   

1.3 SCHEDULE OF OPERATION AND MAINTENANCE DATA PACKAGES

 
   

1.3.1 Data Package 1

 
   

1.3.2 Data Package 2

 
   

1.3.3 Data Package 3

 
   

1.3.4 Data Package 4

 
   

1.3.5 Data Package 5

 
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
   

PART 2 PRODUCTS

 
   

PART 3 EXECUTION

 

-- End of Section Table of Contents -

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

************************************************************************

DEPARTMENT OF THE NAVY

NAVAL FACILITIES

ENGINEERING COMMAND

GUIDE SPECIFICATION

NFGS-01781C

31 March 1998

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Superseding NFGS-01781B (09/96)

************************************************************************

NFGS-01781C

OPERATION AND MAINTENANCE DATA

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

************************************************************************

DEPARTMENT OF THE NAVY

NAVAL FACILITIES

ENGINEERING COMMAND

GUIDE SPECIFICATION

NFGS-01781C

31 March 1998

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Superseding NFGS-01781B (09/96)

************************************************************************

SECTION 01781

OPERATION AND MAINTENANCE DATA

03/98

************************************************************************

NOTE: This guide specification covers Contractor submittal requirements for Data Packages necessary to form the basis for Architect-Engineer (A/E) preparation of facility Operating and Maintenance Support Information (OMSI) Manuals. The prefinal OMSI Manuals should be complete 30 to 60 days before construction acceptance/beneficial occupancy and will be used for operation and maintenance of the facility pending final OMSI completion (approximately 6 months after beneficial occupancy).

Responsibilities for providing Operation and Maintenance (O&M) Data Packages and, finally, OMSI Manuals will normally be as follows:

  1. Project Contractor: Provides Data Package submittals from suppliers and manufacturers to meet the requirements of this guide specification.

    1. Manufacturer's Cut-Sheets: These submittals are the standard product data available from manufacturers for individual pieces of equipment or components. This data describes and identifies the product but does not normally provide detailed operation, maintenance, and repair information.

    2. Supplier/manufacturer O&M Data and/or Manuals: Equipment or components used in facility construction (including many architectural products) have manufacturer's specific instructions and procedures for proper operation, maintenance and repair of the items. This information is needed at the time of occupancy and ofter be specially obtained by the construction Contractor from suppliers/manufacturers at the time of purchase. Refer to paragraph titled “Schedule of Operation and Maintenance Data Packages.” If the product is a “package” system such as diesel electric generator, the supplier or manufacturer can also provide a manual or data that covers a complete system of interrelated components, including interconnecting wiring diagrams, narrative system control sequences,

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

and system operating, maintenance, and repair instructions. The requirements for all O&M Data/Manuals should be completely specified by the designer in the individual technical section which covers the particular system under the “SD-19” submittal designation.

  1. Architect/Engineer: (normally the project designer): Reviews and assembles all Contractor-furnished submittals, prepares and expands on systems operation, maintenance, and repair discussions. The A/E finalizes the OMSI Manuals for the facility user/maintainer by providing such items as illustrations, photographs, utility connection plans, and indexes. Also, preparer will include Contractor submittals such as Shop Drawings, Manufacturer Cut Sheets, Test Reports and Extended Warranties. The objectives of OMSI are to produce high quality, “user friendly,” comprehensive manuals which are essentially complete just prior to facility acceptance and reflect the as-built products and systems.

************************************************************************

************************************************************************

NOTE: This revision “C” to NFGS-01781 revalidates the issue dated 30 September 1996.

************************************************************************

PART 1 GENERAL
1.1 SUBMISSION OF OPERATION AND MAINTENANCE DATA

************************************************************************

NOTE: The provisions of this section apply only to those items requiring operation and maintenance by the technical sections. The technical sections should include a paragraph titled “SD-19, Operation and Maintenance Manuals,” stating: “Submit Operation and Maintenance Data in accordance with Section 01781, “Operations and Maintenance Data,” Data Package [1] [2] [3] [4] [5]. Operation, maintenance, and repair requirements peculiar to certain equipment shall also be specified in the pertinent technical section.

************************************************************************

Submit Operation and Maintenance (O&M) Data/Manuals which are specifically applicable to this contract and a complete and concise depiction of the provided equipment or product. Organize and present information in sufficient detail to clearly explain O&M requirements at the system, equipment, component, and subassembly level. Include an index preceding each submittal. Submit in accordance with this section and Section 01330, “Submittal Procedures.”

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
1.1.1 Quantity

************************************************************************

NOTE: For LANTNAVFACENGCOM projects, submit three copies.

************************************************************************

Submit [five] sets of the supplier/manufacturers' O&M information specified herein for the components, assemblies, subassemblies, attachments, and accessories. The items for which O&M Data/Manuals are required are listed in the technical sections which specifies those particular items.

1.1.2 Package Quality

Documents must be fully legible. Poor quality copies and material with hole punches obliterating the text or drawings will not be accepted.

1.1.3 Package Content

Data package content shall be as shown in the paragraph titled “Schedule of Operation and Maintenance Data Packages.” For each product, system, or component piece of equipment requiring submission of O&M Data, submit the Data Package specified in the individual technical section.

1.1.4 Delivery

Submit O&M Data Manuals to the Contracting Officer for review and acceptance; submit data specified for a given item within 30 calendar days after the item is delivered to the contract site.

  1. In the event the Contractor fails to deliver O&M Data/Manuals within the time limits set forth above, the Contracting Officer may withhold from progress payments 50 percent of the price of the item with which such O&M Data/Manuals are associated.

1.1.5 Changes to Submittals

Manufacturer-originated changes or revisions to submitted data shall be furnished by the Contractor if a component of an item is so affected subsequent to acceptance of the O&M Data. Changes, additions, or revisions required by the Contracting Officer for final acceptance of submitted data, shall be submitted by the Contractor within 30 calendar days of the notification of this change requirement.

1.2 TYPES OF INFORMATION REQUIRED IN O&M DATA PACKAGES

************************************************************************

NOTE: O&M Data needed for any product, system, or piece of equipment depends upon the complexity of that item. The types of O&M Data, defined below, are grouped into Data Packages in the paragraph titled “Schedule of Operation and Maintenance Data Packages.” The Data Package numbers, in turn, appear in the technical guide specifications.

************************************************************************

1.2.1 Operating Instructions
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

Include specific instructions, procedures, and illustrations for the following phases of operation:

1.2.1.1 Safety Precautions

List personnel hazards and equipment or product safety precautions for all operating conditions.

1.2.1.2 Operator Prestart

Include procedures required to set up and prepare each system for use.

1.2.1.3 Startup, Shutdown, and Postshutdown Procedures

Provide narrative description for each operating procedure including control sequence for each.

1.2.1.4 Normal Operations

Provide narrative description of normal operating procedures. Include control diagrams with data to explain operation and control of systems and specific equipment.

1.2.1.5 Emergency Operations

Include emergency procedures for equipment malfunctions to permit a short period of continued operation or to shut down the equipment to prevent further damage to systems and equipment. Include emergency shutdown instructions for fire, explosion, spills, or other foreseeable contingencies. Provide guidance on emergency operations of all utility systems including valve locations and portions of systems controlled.

1.2.1.6 Operator Service Requirements

Include instructions for services to be performed by the operator such as lubrication, adjustment, inspection, and gage reading recording.

1.2.1.7 Environmental Conditions

Include a list of environmental conditions (temperature, humidity, and other relevant data) which are best suited for each product or piece of equipment and describe conditions under which equipment should not be allowed to run.

1.2.2 Preventive Maintenance

Include the following information for preventive and scheduled maintenance to minimize corrective maintenance and repair.

1.2.2.1 Lubrication Data

Include lubrication data, other than instructions for lubrication in accordance with paragraph titled “Operator Service Requirements ”:

  1. A table showing recommended lubricants for specific temperature ranges and applications;

  2. Charts with a schematic diagram of the equipment showing lubrication points, recommended types and grades of lubricants,

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

and capacities; and

  1. A lubrication schedule showing service interval frequency.

1.2.2.2 Preventive Maintenance Plan and Schedule

Include manufacturer's schedule for routine preventive maintenance, inspections, tests and adjustments required to ensure proper and economical operation and to minimize corrective maintenance and repair. Provide manufacturer 's projection of preventive maintenance work-hours on a daily, weekly, monthly, and annual basis including craft requirements by type of craft. For periodic calibrations, provide manufacturer's specified frequency and procedures for each separate operation.

1.2.3 Corrective Maintenance (Repair)

Include manufacturer's recommendations on procedures and instructions for correcting problems and making repairs.

1.2.3.1 Troubleshooting Guides and Diagnostic Techniques

Include step-by-step procedures to promptly isolate the cause of typical malfunctions. Describe clearly why the checkout is performed and what conditions are to be sought. Identify tests or inspections and test equipment required to determine whether parts and equipment may be reused or require replacement.

1.2.3.2 Wiring Diagrams and Control Diagrams

Wiring diagrams and control diagrams shall be point-to-point drawings of wiring and control circuits including factory-field interfaces. Provide a complete and accurate depiction of the actual job specific wiring and control work. On diagrams, number electrical and electronic wiring and pneumatic control tubing and the terminals for each type, identically to actual installation numbering.

1.2.3.3 Maintenance and Repair Procedures

Include instructions and list tools required to restore product or equipment to proper condition or operating standards.

1.2.3.4 Removal and Replacement Instructions

Include step-by-step procedures and list required tools and supplies for removal, replacement, disassembly, and assembly of components, assemblies, subassemblies, accessories, and attachments. Provide tolerances, dimensions, settings and adjustments required. Instructions shall include a combination of text and illustrations.

1.2.3.5 Spare Parts and Supply Lists

Include lists of spare parts and supplies required for maintenance and repair to ensure continued service or operation without unreasonable delays. Special consideration is required for facilities at remote locations. List spare parts and supplies that have a long lead time to obtain.

1.2.3.6 Corrective Maintenance Work-Hours
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

Include manufacturer's projection of corrective maintenance work-hours including craft requirements by type of craft. Corrective maintenance that requires participation of the equipment manufacturer shall be identified and tabulated separately.

1.2.4 Appendices

Provide information required below and information not specified in the preceding paragraphs but pertinent to the maintenance or operation of the product or equipment. Include the following:

1.2.4.1 Parts Identification

Provide identification and coverage for all parts of each component, assembly, subassembly, and accessory of the end items subject to replacement. Include special hardware requirements, such as requirement to use high-strength bolts and nuts. Identify parts by make, model, serial number, and source of supply to allow reordering without further identification. Provide clear and legible illustrations, drawings, and exploded views to enable easy identification of the items. When illustrations omit the part numbers and description, both the illustrations and separate listing shall show the index, reference, or key number which will cross-reference the illustrated part to the listed part. Parts shown in the listings shall be grouped by components, assemblies, and subassemblies. Parts data may cover more than one model or series of equipment. components, assemblies, subassemblies, attachments, or accessories, such as a master parts catalog, in accordance with the manufacturer's standard commercial practice.

1.2.4.2 Warranty Information

List and explain the various warranties and include the servicing and technical precautions prescribed by the manufacturers or contract documents to keep warranties in force. Include warranty information for primary components such as the compressor of air conditioning system.

1.2.4.3 Personnel Training Requirements

Provide information available from the manufacturers to use in training designated personnel to operate and maintain the equipment and systems properly.

1.2.4.4 Testing Equipment and Special Tool Information

Include information on test equipment required to perform specified tests and on special tools needed for the operation, maintenance, and repair of components.

1.2.4.5 Contractor Information

Provide a list that includes the name, address, and telephone number of the General Contractor and each subcontractor installing the product or equipment. Include local representatives and service organizations most convenient to the project site. Provide the name, address, and telephone number of the product or equipment manufacturers.

1.3 SCHEDULE OF OPERATION AND MAINTENANCE DATA PACKAGES

************************************************************************

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

NOTE: The type of O&M data needed for any product, system, or piece of equipment depends upon the complexity of that item. Normally the “Data Package” number will appear in the technical guide specification. If not, the specifier should include the appropriate Data Package number in the respective technical section, guided by the schedule in this paragraph in selecting the Data Package number. Data Package 1 would typically be used for architectural items requiring simple but specific maintenance and replacement; for example, acoustical ceiling, floor tile or carpeting system. Data Package 2 would be used for an item that is less simple; for example, an item having a motor and some sequence of operation such as a refrigerated drinking fountain. Data Package 3 would be used for a complex piece of equipment, having a specific troubleshooting sequence, but one which does not require an operator on watch; for example, HVAC temperature controls. Data Package 4 would be used for an extremely complex piece of equipment, having an extensive sequence of operation, a complex troubleshooting sequence and one requiring frequent operator attention; at least for start-up and shut-down. Examples of this case would be small boilers and small diesel generator sets. Finally, Data Package 5 would be used for electrical equipment, components or systems on which, wiring and control diagrams are needed for operation, maintenance or repair. Examples of this case are 400 Hz frequency converters, annunciator panels and cathodic protection systems.

************************************************************************

Furnish the O&M Data Packages specified in individual technical sections. The required information for each O&M Data Package is as follows:

1.3.1 Data Package 1
  1. Safety precautions

  2. Maintenance and repair procedures

  3. Warranty information

  4. Contractor information

1.3.2 Data Package 2
  1. Safety precautions

  2. Normal operations

  3. Environmental conditions

  4. Lubrication data

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
  1. Preventive maintenance plan and schedule

  2. Maintenance and repair procedures

  3. Removal and replacement instructions

  4. Spare parts and supply list

  5. Parts identification

  6. Warranty information

  7. Contractor information

1.3.3 Data Package 3
  1. Safety precautions

  2. Normal operations

  3. Emergency operations

  4. Environmental conditions

  5. Lubrication data

  6. Preventive maintenance plan and schedule

  7. Troubleshooting guides and diagnostic techniques

  8. Wiring diagrams and control diagrams

  9. Maintenance and repair procedures

  10. Removal and replacement instructions

  11. Spare parts and supply list

  12. Parts identification

  13. Warranty information

  14. Testing equipment and special tool information

  15. Contractor information

1.3.4 Data Package 4
  1. Safety precautions

  2. Operator prestart

  3. Startup, shutdown, and postshutdown procedures

  4. Normal operations

  5. Emergency operations

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
  1. Operator service requirements

  2. Environmental conditions

  3. Lubrication data

  4. Preventive maintenance plan and schedule

  5. Troubleshooting guides and diagnostic techniques

  6. Wiring diagrams and control diagrams

  7. Maintenance and repair procedures

  8. Removal and replacement instructions

  9. Spare parts and supply list

  10. Corrective maintenance man-hours

  11. Parts identification

  12. Warranty information

  13. Personnel training requirements

  14. Testing equipment and special tool information

  15. Contractor information

1.3.5 Data Package 5
  1. Safety precautions

  2. Operator prestart

  3. Start-up, shutdown, and post shutdown procedures

  4. Normal operations

  5. Environmental conditions

  6. Preventive maintenance plan and schedule

  7. Troubleshooting guides and diagnostic techniques

  8. Wiring and control diagrams

  9. Maintenance and repair procedures

  10. Spare parts and supply list

  11. Testing equipments and special tools

  12. Warranty information

  13. Contractor information

PART 2 PRODUCTS
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×

Not used.

PART 3 EXECUTION

Not used.

************************************************************************

NOTE: Suggestions for improvement of this specification will be welcomed using the Navy “Change Request Forms” subdirectory located in SPECSINTACT in Jobs or Masters under “Forms/Documents” directory or DD Form 1426. Suggestions should be forwarded to:

Officer In Charge

Seabee Logistics Center

NAVFAC 15G/SLC 15E

4111 San Pedro Street

Port Hueneme, CA 93043-4410

FAX: (805) 985-6465/922-5196 or DSN 551-5196

************************************************************************

-- End of Section --

Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 46
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 47
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 48
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 49
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 50
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 51
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 52
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 53
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 54
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 55
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 56
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 57
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 58
Suggested Citation:"Appendix D Naval Facilities Engineering Command Guide Specification 01781." National Research Council. 2000. Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary. Washington, DC: The National Academies Press. doi: 10.17226/9904.
×
Page 59
Linking the Construction Industry: Electronic Operation and Maintenance Manuals: Workshop Summary Get This Book
×
Buy Paperback | $29.00 Buy Ebook | $23.99
MyNAP members save 10% online.
Login or Register to save!
Download Free PDF

Public agencies, private corporations, nonprofit institutions, and other organizations regularly invest millions of dollars in acquiring buildings and other constructed facilities to support their lines of business. For this investment, the owner receives a complex structure composed of hundreds of separate but interrelated components, including roofs, walls, foundations, electrical, plumbing, heating, air conditioning, ventilation, fire, communication, safety, and architectural systems. These components and systems must all be maintained and repaired to optimize the facility's performance throughout its service life and to provide a safe, healthy, and productive environment for its users and occupants.

Linking the Construction Industry: Electronic Operation and Maintenance Manuals is a summary of a workshop that was held at the National Academy of Sciences in Washington, D.C., on October 13, 1999. The workshop, planned and organized by the Federal Facilities Council and the National Institute of Building Sciences, brought together an invited audience of building industry stakeholders, including owners and operators from federal agencies and other organizations, building component and system manufacturers, publishers of building product data and maintenance manuals, and CMMS software developers to revisit the issue of electronic operation and maintenance manuals.

  1. ×

    Welcome to OpenBook!

    You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

    Do you want to take a quick tour of the OpenBook's features?

    No Thanks Take a Tour »
  2. ×

    Show this book's table of contents, where you can jump to any chapter by name.

    « Back Next »
  3. ×

    ...or use these buttons to go back to the previous chapter or skip to the next one.

    « Back Next »
  4. ×

    Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

    « Back Next »
  5. ×

    Switch between the Original Pages, where you can read the report as it appeared in print, and Text Pages for the web version, where you can highlight and search the text.

    « Back Next »
  6. ×

    To search the entire text of this book, type in your search term here and press Enter.

    « Back Next »
  7. ×

    Share a link to this book page on your preferred social network or via email.

    « Back Next »
  8. ×

    View our suggested citation for this chapter.

    « Back Next »
  9. ×

    Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

    « Back Next »
Stay Connected!