Below are the first 10 and last 10 pages of uncorrected machine-read text (when available) of this chapter, followed by the top 30 algorithmically extracted key phrases from the chapter as a whole.
Intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text on the opening pages of each chapter. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.
Do not use for reproduction, copying, pasting, or reading; exclusively for search engines.
OCR for page 33
33 REFERENCES 1. Nadal, M. J., Locomotives a Vapeur, Collection Encyclopedie 9. International Heavy Haul Association, Guidelines to Best Scientifique, Biblioteque de Mecanique Appliquee et Genie, Practices for Heavy Haul Railway Operations: Wheel and Rail Vol. 186, Paris, France, no date. Interface Issues, Virginia Beach, Va., May 2001. 2. Wu, H., and J. Elkins, "Investigation of Wheel Flange Climb 10. Evans, J., and M. Dembosky, " Investigation of Vehicle Dynamic Derailment Criteria," Report R-931, Association of Ameri- influence on Rolling Contact Fatigue on UK Railways," The can Railroads, Washington, D.C., July 1999. Dynamics of Vehicles on Roads and on Tracks, Volume 41, 2003. 3. Manual of Standards and Recommended Practices, Section G, 11. Parsons Brinckerhoff Quade & Douglas, Inc., TCRP Report "Wheels and Axles," Association of American Railroads, 57: Track Design Handbook for Light Rail Transit, TRB, Washington, D.C., 1998. National Research Council, Washington, D.C., 2000. 4. Field Manual of AAR Interchange Rules, Association of Amer- 12. APTA Passenger Rail Safety Standard Task Force Technical ican Railroads, Washington, D.C., 2004. Bulletin, 1998-1, Part 1, American Public Transportation 5. Sawley, K., C. Urban, and R. Walker, "The Effect of Hol- Association, 1998. low-Worn Wheels on Vehicle Stability in Straight Track," 13. Manual for Railway Engineering, Volume 1, Chapter 4, Amer- Proceedings, Contact Mechanics and Wear of Rail/Wheel ican Railway Engineering and Maintenance of Way Associa- System, the 6th International Conference, Gothenburg, Swe- tion, Landover, Md., 2003. den, June 2003. 14. Ishida, M., and N. Abe, "Experimental Study on the Effect of 6. Sawley, K., and H. Wu, "The Formation of Hollow-Worn Preventive Grinding for Shinkansen Rails," 6th International Wheels and Their Effect on Wheel/Rail Interaction," Pro- Heavy Haul Conference, Cape Town, South Africa, April ceedings, Contact Mechanics and Wear of Rail/Wheel Sys- 1997. tem, the 6th International Conference, Gothenburg, Sweden, 15. Grassie, S., "Requirements for Transverse Railhead Profile and June 2003. Through Rail Grinding," 6th International Heavy Haul Con- 7. Wu, H., and K. Sawley, "New Solutions to Familiar Problems," ference, Cape Town, South Africa, April 1997. International Railway Journal, pp. 40-41, December 2003. 16. Worth, A., J. Hornaday, and P. Richards, "Prolonging Rail Life 8. Wilson, N., et al., NUCARS Users Manual, Version 2.3, Trans- Through Rail Grinding," 3rd International Heavy Haul Confer- portation Technology Center, Pueblo, Colo., 2003. ence, Vancouver, British Columbia, 1986.